Drivetech 4X4 Rocker AUX Lights Switch On/off Spst 12 Or 24V Blue Illumination DT-11013

The Drivetech 4x4 rocker AUX lights switch, part number DT-11013, is a single pole single throw (SPST) on/off switch designed for auxiliary lighting circuits. It runs on 12 or 24 volt systems and uses blue illumination, with contacts rated at 20A @ 12V.

This is a rocker-style switch with 5 terminals and a 2-position on/off action. The mounting cut-out is 36mm x 20mm, so it suits applications where that panel opening is available and the switch body can be accommodated correctly.

For buyers setting up or replacing an AUX light control, the key details here are the 12 or 24 volt operating range, the 20A power rating, and the DT-11013 part number. Those are the points to confirm before ordering, especially if you are matching an existing switch panel or wiring arrangement.

Key Features

• AUX lights switch
• On/Off SPST action
• Blue illuminated switch
• Suitable for 12V or 24V systems
• 5 terminals
• Rocker switch design

Specifications

• Brand: Drivetech 4x4
• Part No.: DT-11013
• Product type: Switch
• Switch type: Rocker
• Switch action: On - Off - SPST
• Number of positions: 2
• Number of poles: 1
• Number of terminals: 5

Application and Buying Notes

If you are replacing an existing auxiliary light switch, start with the part number DT-11013 and the physical cut-out size of 36mm x 20mm. Those two details are the most practical checks when you want a clean panel fit and a straightforward swap without modifying the opening.

The switch is rated for 12 or 24 volt systems and has contacts rated at 20A @ 12V. That makes the voltage and load rating important to verify against the circuit you plan to control, especially if the wiring already uses a fused relay setup or is shared with other accessories.

Because this is a 5-terminal, SPST rocker switch, you should confirm the terminal arrangement against your existing wiring before purchase. Even when the size looks right, terminal count and switch action need to match the vehicle’s electrical layout and the intended on/off function.

Blue illumination is included, which helps with visibility in low light and gives a clear indication when the switch is fitted. If you are replacing a matching illuminated switch, check the colour and the panel space carefully so the appearance and layout remain consistent.

The one-year warranty applies to the product, but it does not remove the need to check the installation requirements first. Proper fit depends on the panel opening, terminal configuration, and the electrical rating matching the accessory being switched.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DT-11013 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Number of Terminals 5, Switch Action On - Off - SPST, Lamp Colour/s Blue, Number of Poles 1, Switch Type Rocker, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Additional published details for cross-checking include Part No. DT-11013, Brand DRIVETECH 4X4, Description Drivetech 4x4 Rocker AUX Lights Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V), Mount Width 20mm, Power Rating (Amp) 20, Voltage 12 or 24, Mount Length 36mm, Number of Positions 2, Switch Illumination Illuminated, Product Group 1 AUTO ELEC ACCESSORIES.

Drivetech 4x4 Rocker AUX Lights Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V). Part number DT-11013 should be checked first. Listed voltage is 12 or 24. Listed output rating is 20. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DT-11013, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output 20 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by checking the part number DT-11013, the 36mm x 20mm mounting opening, the 5-terminal SPST configuration, and the 12 or 24 volt requirement against your vehicle or accessory setup before ordering.

FAQ

What is the part number for this switch?

The part number is DT-11013. For this listing, part number DT-11013 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What voltage does the switch suit?

It is listed for 12 or 24 volt systems. For this listing, part number DT-11013 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

How many terminals does the switch have?

It has 5 terminals. For this listing, part number DT-11013 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What is the mounting size?

The mounting hole size is 36mm x 20mm, with a 20mm mount width and 36mm mount length. For this listing, part number DT-11013 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

Is the switch illuminated?

Yes. It has blue illumination and is listed as illuminated. For this listing, part number DT-11013 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

Does this listing confirm vehicle-specific fitment?

No. No vehicle fitment is provided here, so compatibility should be checked against the part number DT-11013, the 36mm x 20mm opening, and the 5-terminal SPST configuration. For this listing, part number DT-11013 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.