Drivetech 4X4 Rocker Fog Light Switch On/off Spst 12 Or 24V Blue Illumination DT-11020

The Drivetech 4x4 rocker fog light switch is a 2-position On/Off SPST switch with blue illumination, designed for 12V or 24V electrical systems. It is identified by part number DT-11020 and is sold as an each unit for accessory switching applications where a compact rocker switch is required.

This switch uses 5 terminals, has 1 pole, and is rated at 20A. The mounting opening is 36 x 20mm, with the listed mount width at 20mm and mount length at 36mm, so the panel cut-out needs to be checked carefully before ordering.

As a fog light switch, it suits a straightforward single-circuit on/off setup. The illuminated blue lamp helps with switch location in the cabin or dash area, while the 12 or 24 volt rating makes it suitable for either system voltage as long as the installation matches the vehicle’s wiring and switching requirements.

Key Features

• Rocker fog light switch
• On/Off SPST action
• Blue illuminated switch
• 12V or 24V operation
• 20A power rating
• 5 terminal, 1 pole design

Specifications

• Brand: Drivetech 4x4
• Part No.: DT-11020
• Type: Switch
• Switch type: Rocker
• Switch action: On - Off - SPST
• Number of positions: 2
• Number of poles: 1
• Number of terminals: 5

Application and Buying Notes

Before buying, confirm the panel opening is suitable for the listed 36 x 20mm mounting hole. A switch can have the right electrical rating, such as 20A and SPST, but still be unsuitable if the dash or switch panel cut-out does not match the physical size.

Check that your application only needs a simple on/off circuit. This rocker switch is listed as On - Off - SPST with 1 pole and 5 terminals, so it is intended for a single-circuit switching job rather than a more complex multi-function setup.

The 12 or 24 volt rating is important, but it does not remove the need to match the wiring correctly. Make sure the vehicle system voltage, load, and fuse protection are all appropriate for the accessory being controlled, especially where fog lights or other higher-current accessories are involved.

Because the contacts are rated at 20A @ 12V, it is sensible to stay within the stated electrical limits and not assume the switch will suit every lighting or accessory load. If the circuit draws close to the limit, proper wiring practices and suitable protection become more important.

Blue illumination is useful for visibility and identification, but it should not be treated as a performance feature. The practical priorities here are the part number DT-11020, the 36 x 20mm cut-out, and the on/off SPST switching arrangement.

If you are replacing an existing switch, match the part number where possible and compare the terminal count, panel size, and switch action before fitting. That is the safest way to avoid ordering a switch that looks similar but does not suit the installation.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DT-11020 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Number of Terminals 5, Switch Action On - Off - SPST, Lamp Colour/s Blue, Number of Poles 1, Switch Type Rocker, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Additional published details for cross-checking include Part No. DT-11020, Brand DRIVETECH 4X4, Description Drivetech 4x4 Rocker Fog Light Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V), Mount Width 20mm, Power Rating (Amp) 20, Voltage 12 or 24, Mount Length 36mm, Number of Positions 2, Switch Illumination Illuminated, Product Group 1 AUTO ELEC ACCESSORIES.

Drivetech 4x4 Rocker Fog Light Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V). Part number DT-11020 should be checked first. Listed voltage is 12 or 24. Listed output rating is 20. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DT-11020, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output 20 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

Compatibility note: Confirm the fit by checking part number DT-11020, the 36 x 20mm mounting hole, the 5-terminal SPST on/off layout, and the 12 or 24 volt application before purchase.

FAQ

What type of switch is this?

It is a rocker switch with On - Off - SPST action, intended for a single-circuit switching application.

What voltage does it suit?

The listed voltage is 12 or 24 volt, so it can suit either system as long as the installation and wiring are appropriate.

What is the current rating?

The switch is rated at 20A, with the description noting contacts rated 20A @ 12V.

What size hole does it need?

The listed mounting hole is 36 x 20mm, with mount width 20mm and mount length 36mm.

How many terminals does it have?

It has 5 terminals and 1 pole.

Does this listing confirm vehicle fitment?

No specific vehicle fitment is provided. Confirm suitability by matching the part number DT-11020, the 36 x 20mm cut-out, the 5-terminal SPST layout, and the system voltage before ordering.