Drivetech 4X4 Rocker Fog Light Switch On/off Spst 12 Or 24V Blue Illumination DT-11020

The Drivetech 4x4 rocker fog light switch, part number DT-11020, is a 1-pole SPST on/off switch designed for fog light control in a 12V or 24V electrical system. It uses a rocker style actuator, has 5 terminals, and is listed with a 20A power rating, with contacts rated at 20A @ 12V.

This switch features blue illumination for easier identification in the cabin and is designed around a 36 x 20mm mounting hole. If you are replacing an existing fog light switch or adding one to a custom electrical setup, the mounting size and terminal count are the main details to check before ordering.

As a general vehicle electrical accessory, this switch suits applications where a straightforward on/off circuit is required. The listed one-year warranty provides a clear reference point for the product itself, while the final installation outcome still depends on matching the switch to the vehicle, panel, wiring, and load correctly.

Key Features

• Rocker style fog light switch
• On/Off - SPST function
• Blue illuminated switch
• Suitable for 12V or 24V systems
• 5 terminals
• 36 x 20mm mounting hole

Specifications

• Brand: Drivetech 4x4
• Product type: Switch
• Switch action: On - Off - SPST
• Switch type: Rocker
• Number of poles: 1
• Number of terminals: 5
• Number of positions: 2
• Lamp colour: Blue

Application and Buying Notes

Before buying, confirm the switch opening in your panel is 36 x 20mm, as that is the mounting size listed for this DT-11020 rocker switch. A close physical match matters just as much as electrical suitability, particularly when the switch is being fitted into a dash panel, switch blank, or accessory console.

The electrical side also needs checking carefully. This switch is listed for 12V or 24V use and has a 20A power rating, with contacts rated at 20A @ 12V. That makes the current draw of the fog light circuit an important consideration, along with any relay or existing wiring arrangement already in the vehicle.

Because the switch is an On/Off SPST design, it is intended for a simple single circuit rather than a multi-function control. The 5-terminal layout and illuminated blue lens are useful details when comparing it to the switch you are replacing, especially if you are working from an original factory panel or matching an accessory switch bank.

If you are replacing an existing fog light switch, compare the old unit’s part number, terminal count, mounting dimensions, and illumination style before ordering. Where the original switch has a different shape, terminal arrangement, or electrical rating, a direct swap should not be assumed without verifying the wiring and panel cut-out first.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DT-11020 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Number of Terminals 5, Switch Action On - Off - SPST, Lamp Colour/s Blue, Number of Poles 1, Switch Type Rocker, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Additional published details for cross-checking include Part No. DT-11020, Brand DRIVETECH 4X4, Description Drivetech 4x4 Rocker Fog Light Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V), Mount Width 20mm, Power Rating (Amp) 20, Voltage 12 or 24, Mount Length 36mm, Number of Positions 2, Switch Illumination Illuminated, Product Group 1 AUTO ELEC ACCESSORIES.

Drivetech 4x4 Rocker Fog Light Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V). Part number DT-11020 should be checked first. Listed voltage is 12 or 24. Listed output rating is 20. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DT-11020, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output 20 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Confirm compatibility by matching the part number DT-11020, the 36 x 20mm mounting hole size, the 5-terminal SPST layout, and the 12V or 24V system requirement against your vehicle or accessory wiring before purchase.

FAQ

What is the part number for this switch?

The part number is DT-11020. For this listing, part number DT-11020 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What type of switch is it?

It is a rocker switch with On - Off - SPST action and 1 pole. For this listing, part number DT-11020 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What voltage does it suit?

It is listed for 12V or 24V systems. For this listing, part number DT-11020 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What size mounting hole does it need?

The listed mounting hole size is 36 x 20mm. For this listing, part number DT-11020 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

How many terminals does it have?

It has 5 terminals. For this listing, part number DT-11020 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

Does it light up?

Yes. The switch is illuminated and the lamp colour is blue. For this listing, part number DT-11020 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.