Drivetech 4X4 Rocker Back Up Lights Switch On/off Spst 12 Or 24V Blue Illumination DT-11014

The Drivetech 4x4 rocker back up lights switch is a simple on/off SPST switch designed for backup light control, with blue illumination and contacts rated 20A at 12V. It runs on 12 or 24 volt systems and uses a 5-terminal layout, making it a practical option for a clean dash-mounted accessory switch setup.

This switch is identified by part number DT-11014 and is supplied as an individual unit. The mounting size is 36 x 20mm, with a 36mm mount length and 20mm mount width, so the opening needs to suit those measurements before installation is attempted.

As a rocker-style switch, it gives a straightforward two-position on/off action with one pole and two positions. The illuminated blue lamp can help the switch stand out in a busy cabin, but the key point for selection is still the electrical and mounting match: 12 or 24V supply, 20A rating at 12V, and the 36 x 20mm cut-out size.

Key Features

• Backup lights switch
• On/Off SPST action
• Blue illuminated rocker
• Suitable for 12V or 24V systems
• 5 terminals
• 36 x 20mm mounting hole

Specifications

• Brand: Drivetech 4x4
• Part No.: DT-11014
• Product type: Switch
• Switch type: Rocker
• Switch action: On - Off - SPST
• Number of poles: 1
• Number of terminals: 5
• Number of positions: 2

Application and Buying Notes

Before ordering, confirm the dash or panel opening is sized for a 36 x 20mm mounting hole. The listed mount width is 20mm and mount length is 36mm, so a close physical match matters just as much as the electrical rating when you are fitting a rocker switch like DT-11014.

The switch is marked as suitable for 12 or 24 volt systems, and the contacts are rated at 20A at 12V. That means it should be checked against the intended circuit load and the system voltage before installation. If the backup light circuit is already near its current limit, the correct assessment should be made by the installer rather than assuming headroom.

With 5 terminals, this is not a simple two-wire device in the way some buyers expect. The terminal layout needs to suit the vehicle’s wiring plan and the way the backup lights are being controlled. If you are replacing an existing switch, matching the part number DT-11014 and comparing the terminal count is a sensible first step.

Blue illumination is useful for identifying the switch at night, but illumination alone does not confirm compatibility. The important checks are the switch action, the cut-out size, the terminal count, and whether the circuit is designed for a 1-pole, 2-position SPST rocker with on/off operation.

This is sold as an each unit and is covered by a one-year warranty. As with any electrical accessory switch, careful confirmation of the opening size, wiring arrangement, and intended voltage is the best way to avoid installation issues and return time.

If you are matching an existing switch, compare the old unit’s part number, mounting dimensions, terminal count, and illumination colour before purchase. Those details are more reliable than shape alone when selecting a replacement switch for backup lights or another accessory circuit.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DT-11014 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Number of Terminals 5, Switch Action On - Off - SPST, Lamp Colour/s Blue, Number of Poles 1, Switch Type Rocker, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Additional published details for cross-checking include Part No. DT-11014, Brand DRIVETECH 4X4, Description Drivetech 4x4 Rocker Back Up Lights Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V), Mount Width 20mm, Power Rating (Amp) 20, Voltage 12 or 24, Mount Length 36mm, Number of Positions 2, Switch Illumination Illuminated, Product Group 1 AUTO ELEC ACCESSORIES.

Drivetech 4x4 Rocker Back Up Lights Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V). Part number DT-11014 should be checked first. Listed voltage is 12 or 24. Listed output rating is 20. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DT-11014, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output 20 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

Compatibility note: Please confirm fitment by checking part number DT-11014, the 36 x 20mm mounting size, the 5-terminal layout, and the intended 12V or 24V application before ordering.

FAQ

What is the part number for this switch?

The part number is DT-11014.

What type of switch is it?

It is a rocker switch with On - Off SPST action and 1 pole.

What voltage does it suit?

It is listed for 12 or 24 volt systems.

How many terminals does it have?

It has 5 terminals.

What size mounting hole is required?

The listed mounting size is 36 x 20mm, with a 36mm mount length and 20mm mount width.

Is the switch illuminated?

Yes. It has blue illumination and is listed as an illuminated switch.