Drivetech 4X4 Rocker Front Diff Switch On/off Spst 12 Or 24V Blue Illumination 20A DT-11022

The Drivetech 4x4 Rocker Front Diff Switch is a rocker-style switch with On/Off SPST action, 5 terminals, and blue illumination. It is specified for 12 or 24 volt use, with contacts rated at 20A @ 12V, and carries part number DT-11022.

This switch uses a 36 x 20mm mounting hole, with the stated mount width of 20mm and mount length of 36mm. It is listed as a front diff switch, so it suits buyers looking for a dedicated switch setup where those electrical and panel dimensions are the key checks.

The unit is sold as each and comes with a one year warranty. As with any electrical accessory switch, matching the part number, voltage, terminal count, and mounting size before purchase is the safest way to confirm it is the right unit for the job.

Key Features

• Rocker switch design
• Front diff switch application
• On/Off SPST action
• Blue illuminated lens
• 12 or 24 volt
• 5 terminals

Specifications

• Brand: Drivetech 4x4
• Part number: DT-11022
• Type: Switch
• Switch type: Rocker
• Switch action: On - Off - SPST
• Number of poles: 1
• Number of positions: 2
• Number of terminals: 5

Application and Buying Notes

Before ordering, check the 36 x 20mm mounting hole against your dash or switch panel opening, as the listed mount length is 36mm and mount width is 20mm. That physical size is one of the most important checks for a rocker switch like this, because an incorrect opening can stop the switch seating correctly.

The electrical side also matters. This unit is specified for 12 or 24 volt use and has 5 terminals, with On/Off SPST operation and 1 pole. If your existing wiring or switch circuit is set up differently, the switch may not suit the application without changes to the loom or connector arrangement.

The contacts are rated at 20A @ 12V, so the current draw of the circuit should be checked carefully. If the front differential control circuit or accessory load exceeds the switch rating, the switch is not the right match. Keeping within the stated rating is important for reliable operation and safety.

Blue illumination is part of the design, which is useful if you want the switch to match other illuminated accessories on the dash. If you are replacing an existing switch, compare the illumination style, terminal layout, and the part number DT-11022 rather than relying on appearance alone.

This switch is described as a front diff switch, so it is best used where that function is specifically required. Even when the panel size looks right, confirm the application details and wiring requirements before fitting. That is especially important on vehicles that have had previous modifications or custom switch panels installed.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DT-11022 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Number of Terminals 5, Switch Action On - Off - SPST, Lamp Colour/s Blue, Number of Poles 1, Switch Type Rocker, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Additional published details for cross-checking include Part No. DT-11022, Brand DRIVETECH 4X4, Description Drivetech 4x4 Rocker Front Diff Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V), Mount Width 20mm, Power Rating (Amp) 20, Voltage 12 or 24, Mount Length 36mm, Number of Positions 2, Switch Illumination Illuminated, Product Group 1 AUTO ELEC ACCESSORIES.

Drivetech 4x4 Rocker Front Diff Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V). Part number DT-11022 should be checked first. Listed voltage is 12 or 24. Listed output rating is 20. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DT-11022, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output 20 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by checking part number DT-11022, the 5-terminal On/Off SPST configuration, 12 or 24 volt compatibility, and the 36 x 20mm mounting hole before purchase.

FAQ

What is the part number for this switch?

The part number is DT-11022. For this listing, part number DT-11022 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What voltage is this switch rated for?

It is specified for 12 or 24 volt use. For this listing, part number DT-11022 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

How many terminals does it have?

It has 5 terminals. For this listing, part number DT-11022 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What is the switch action?

It is On - Off - SPST, with 1 pole and 2 positions. For this listing, part number DT-11022 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What size mounting hole does it use?

The mounting hole size is 36 x 20mm, with a mount length of 36mm and mount width of 20mm. For this listing, part number DT-11022 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

Is the switch illuminated?

Yes. It has blue illumination and is listed as illuminated. For this listing, part number DT-11022 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.