Drivetech 4X4 OE Style Push Button Switch DT-11078 12V 3A Aux Lights

The Drivetech 4x4 OE Style Push Button Switch is a 12V, 3A switch with blue LED illumination and an on-off SPST action. It is identified by part number DT-11078 and is supplied as a single switch unit.

This switch measures 32.5mm x 22mm at the mounting face, which is the key sizing detail to check before ordering. It is listed for Toyota and Mitsubishi applications, including Prado 150 series 2010-2018, Landcruiser 200 series 2008-current, Rav4 2006-2011, HiLux GUN series 09/2015-current, and Triton 2015-current.

The switch uses an auxiliary lights symbol and is intended for vehicle accessory control where a compact OE-style push button is required. Wiring is identified as black for earth, blue for dash light circuit (optional), red for 12V input, and green for 12V output.

Key Features

• OE style push button switch
• Blue LED illumination
• 12V, 3A rating
• On-off SPST switch action
• Aux lights symbol
• 32.5mm x 22mm mounting size

Specifications

• Brand: Drivetech 4x4
• Part No.: DT-11078
• Voltage: 12V
• Power rating: 3A
• Switch type: Push
• Switch action: On - Off - SPST
• Illumination: Blue LED
• Mount width: 22mm

Verified fitment applications

• Toyota Prado 150 series, 2010-2018
• Toyota Landcruiser 200 series, 2008-current
• Toyota Rav4, 2006-2011
• Toyota HiLux GUN series, 09/2015-current
• Mitsubishi Triton, 2015-current

Application and Buying Notes

Before ordering, match the part number DT-11078 and confirm the mounting size of 32.5mm x 22mm against your dash or switch panel opening. A switch of this style can look similar to others, so the measured mount width of 22mm and mount length of 32.5mm are the best starting checks for fitment.

The switch is rated at 12V and 3A, so it suits low-current accessory control rather than heavier electrical loads. If the circuit you want to control draws more than 3A, the switch should not be treated as a direct replacement for a higher-rated control without checking the circuit design.

Wiring is straightforward but still needs care at installation. Black is earth, blue is the optional dash light circuit, red is 12V input, and green is 12V output. If you want the switch illumination to operate with the dash lighting, the blue wire may be used; if not, it can remain unused depending on the vehicle setup.

Fitment is listed for specific Toyota and Mitsubishi models and series, including Prado 150, Landcruiser 200, Rav4, HiLux GUN, and Triton. Even where the model family matches, the dash opening, wiring arrangement, and accessory circuit should still be checked against the vehicle before purchase or installation.

The one year warranty applies to the switch as supplied. As with any electrical accessory, proper installation matters: confirm polarity, confirm available space, and make sure the accessory being controlled is appropriate for a 3A, 12V push switch with SPST on-off action.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DT-11078 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Power Rating (Amp) 3, Voltage 12V, Switch Type Push, Switch Illumination Blue LED Illumination, Product Group 1 AUTO ELEC ACCESSORIES, Part No. DT-11078, Brand DRIVETECH 4X4.

Additional published details for cross-checking include Description Drivetech 4x4 OE Style Push Button Switch Aux Lights Symbol Suits Toyota and Mitsubishi, Mount Width 22mm, Switch Action On - Off - SPST, Mount Length 32.5mm, Item Type Switch, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Drivetech 4x4 OE Style Push Button Switch Aux Lights Symbol Suits Toyota and Mitsubishi. Part number DT-11078 should be checked first. Listed voltage is 12V. Listed output rating is 3. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DT-11078, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12V and output 3 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility using part number DT-11078, the 32.5mm x 22mm mounting size, and the listed Toyota or Mitsubishi application details before ordering.

FAQ

What is the part number for this switch?

The part number is DT-11078. For this listing, part number DT-11078 is the main reference point. Listed voltage is 12V. Listed output rating is 3. Published fitment references include MITSUBISHI TRITON, MITSUBISHI TRITON 2015, TOYOTA FORTUNER. These details should still be checked against the original unit before ordering.

What voltage and current rating does it have?

It is rated at 12V and 3A. For this listing, part number DT-11078 is the main reference point. Listed voltage is 12V. Listed output rating is 3. Published fitment references include MITSUBISHI TRITON, MITSUBISHI TRITON 2015, TOYOTA FORTUNER. These details should still be checked against the original unit before ordering.

What type of switch action is it?

It is an on-off SPST push switch. For this listing, part number DT-11078 is the main reference point. Listed voltage is 12V. Listed output rating is 3. Published fitment references include MITSUBISHI TRITON, MITSUBISHI TRITON 2015, TOYOTA FORTUNER. These details should still be checked against the original unit before ordering.

What are the mounting dimensions?

The mounting size is 32.5mm x 22mm, with a 22mm mount width and 32.5mm mount length. For this listing, part number DT-11078 is the main reference point. Listed voltage is 12V. Listed output rating is 3. Published fitment references include MITSUBISHI TRITON, MITSUBISHI TRITON 2015, TOYOTA FORTUNER. These details should still be checked against the original unit before ordering.

Which vehicles are listed for fitment?

Listed applications include Toyota Prado 150 series 2010-2018, Toyota Landcruiser 200 series 2008-current, Toyota Rav4 2006-2011, Toyota HiLux GUN series 09/2015-current, and Mitsubishi Triton 2015-current. For this listing, part number DT-11078 is the main reference point. Listed voltage is 12V. Listed output rating is 3. Published fitment references include MITSUBISHI TRITON, MITSUBISHI TRITON 2015, TOYOTA FORTUNER. These details should still be checked against the original unit before ordering.

How is the switch wired?

The wiring code is black for earth, blue for the dash light circuit as an optional connection, red for 12V input, and green for 12V output. For this listing, part number DT-11078 is the main reference point. Listed voltage is 12V. Listed output rating is 3. Published fitment references include MITSUBISHI TRITON, MITSUBISHI TRITON 2015, TOYOTA FORTUNER. These details should still be checked against the original unit before ordering.