Drivetech 4X4 Rocker 4 Switch Panel On-off Spst 12/24V Blue Illumination DT-11030

The Drivetech 4x4 Rocker 4 Switch Panel is a 4-switch rocker panel with On-Off SPST operation, blue illumination, and contacts rated at 20A @ 12V. It is specified for 12V or 24V systems and carries part number DT-11030, which is the key identifier to check against your application before purchase.

This panel is designed as a switch solution for accessory control, with pre-wired illuminated rocker switches and a fascia that hides the blade fuse holders. The mounting hole size is 93 x 105mm, so the physical cut-out is just as important as the electrical specification when confirming whether it will suit your installation.

The included 40 application decals help label the switches for different uses, which can be useful when you are fitting and identifying multiple accessories. With four switch positions and a 20A rating, it suits buyers who need a compact control panel with clear switching and a defined mounting footprint.

Key Features

• 4-switch rocker panel
• On-Off SPST switch action
• Blue illuminated switches
• Rated 20A @ 12V
• Suitable for 12V or 24V systems
• Mounting hole: 93 x 105mm

Specifications

• Brand: Drivetech 4x4
• Part No.: DT-11030
• Item type: Switch Panel (Rocker)
• Switch type: Rocker
• Switch illumination: Illuminated
• Lamp colour: Blue
• Voltage: 12 or 24V
• Power rating: 20A

Application and Buying Notes

Before ordering, confirm the mounting opening in your dash or console is 93 x 105mm, as that is the stated cut-out size for this Drivetech 4x4 rocker panel. The part number DT-11030 should also be matched against your existing setup or intended accessory plan, especially if you are replacing a switch panel rather than starting from scratch.

Electrical compatibility matters as much as physical fit. This unit is listed for 12V or 24V systems, with contacts rated at 20A @ 12V, so you should check the current draw of each device you want to control and allow for the way the load is distributed in your installation. If your accessories draw more than the panel or circuit is intended to handle, it is not the right choice.

The panel is set up for On-Off SPST switching with a single pole and two positions, so it is suited to straightforward accessory control rather than more complex multi-circuit functions. If your vehicle or accessory loom needs a different switching style, use the switch action and pole count as the main comparison points.

The fascia hides the blade fuse holders, which is useful from a tidy-installation point of view, but you still need access for correct fuse selection and maintenance. The included 40 application decals can help you label each switch clearly, but you should still confirm the function of every accessory before final wiring and activation.

Blue illumination is a practical feature when you want the switches to be visible in low light, but the actual appearance and brightness will depend on the installation and vehicle environment. If you are working in a custom build, measure the available panel space carefully and compare the 93 x 105mm mounting hole against the finished trim opening, not just the rough opening.

This switch panel is sold individually as an each unit and is backed by a one year warranty. As with any electrical accessory, proper wiring, suitable circuit protection, and a clean mounting location are important for reliability, so it is worth confirming the complete installation before committing to the part.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DT-11030 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Power Rating (Amp) 20, Voltage 12 or 24, Mount Length 105mm, Number of Poles 1, Switch Type Rocker, Switch Illumination Illuminated, Product Group 1 AUTO ELEC ACCESSORIES.

Additional published details for cross-checking include Part No. DT-11030, Brand DRIVETECH 4X4, Description Drivetech 4x4 Rocker 4 Switch Panel On - Off - SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V), Mount Width 93mm, Switch Action On - Off - SPST, Lamp Colour/s Blue, Note Includes 40 Application Decals, Number of Positions 2, Item Type Switch Panel (Rocker).

Drivetech 4x4 Rocker 4 Switch Panel On - Off - SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V). Part number DT-11030 should be checked first. Listed voltage is 12 or 24. Listed output rating is 20. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DT-11030, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output 20 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Please confirm fitment by matching part number DT-11030, the 93 x 105mm mounting hole size, and the 12V or 24V electrical requirement against your vehicle and accessory setup before purchase.

FAQ

What is the part number for this switch panel?

The part number is DT-11030.

Is this switch panel suitable for 12V and 24V systems?

Yes. It is listed for 12V or 24V systems.

How many switches are included on the panel?

It is a 4-switch rocker panel.

What is the mounting hole size?

The stated mounting hole size is 93 x 105mm.

What type of switch action does it use?

It uses On-Off SPST switch action with one pole and two positions.

Does it include labels for the switches?

Yes. It includes 40 application decals.