Drivetech 4X4 Rocker 6 Switch Panel On-off Spst 12 Or 24V DT-11031

The Drivetech 4x4 Rocker 6 Switch Panel is a pre-wired illuminated rocker switch panel designed for 12V or 24V electrical systems. It is rated at 20 Amp at 12V, uses an On-Off SPST switch action, and carries part number DT-11031.

This panel is set up to control up to six devices, with blue LED illumination and blade fuses hidden behind the fascia. The mounting hole size is 93 x 157mm, with a mount length of 157mm and mount width of 93mm, so checking the available dash or console space before ordering is important.

It is sold as an each unit and comes with 40 application decals to help identify the switches after installation. The unit type is a rocker switch panel, and the listing is backed by a one year warranty.

Key Features

• Pre-wired illuminated rocker switch panel
• Supports 12V or 24V systems
• 20 Amp rating at 12V
• On-Off SPST switch action
• Blue LED illumination
• Controls up to six devices

Specifications

• Brand: Drivetech 4x4
• Part No.: DT-11031
• Item type: Switch Panel (Rocker)
• Switch type: Rocker
• Switch illumination: Illuminated
• Lamp colour: Blue
• Switch action: On-Off-SPST
• Number of poles: 1

Application and Buying Notes

Before buying, confirm the available mounting space matches the stated 93 x 157mm cut-out size. The panel is 93mm wide and 157mm long, so a tight dash opening, console section, or switch housing should be measured carefully before installation.

Electrical compatibility should also be checked against your vehicle or accessory setup. This panel is suitable for 12V or 24V systems and is rated at 20 Amp at 12V, so the load on each switched circuit needs to sit within the panel’s stated rating and the rest of the circuit protection setup must be suitable for the way you plan to use it.

The switch action is On-Off SPST with one pole and two positions, which makes it suitable for straightforward single-circuit switching. Because it is a six-switch panel, it is useful for setups where several accessories need tidy, labelled control from one location rather than separate loose switches.

The hidden blade fuses behind the fascia are a practical detail for installers who want a cleaner face and easier switch identification. The included 40 application decals can also help match the panel to the accessories being controlled, but final labelling still depends on how the panel is wired and used in your vehicle.

This unit is an illuminated rocker switch panel rather than a universal plug-and-play vehicle-specific kit. It is best suited to installers who can verify the mounting opening, circuit load, supply voltage, and the physical space behind the dash before fitting. If those points are checked first, the part number DT-11031 becomes the most reliable reference when comparing listings or ordering replacements.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DT-11031 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Power Rating (Amp) 20, Voltage 12 or 24, Mount Length 157mm, Number of Poles 1, Switch Type Rocker, Switch Illumination Illuminated, Product Group 1 AUTO ELEC ACCESSORIES.

Additional published details for cross-checking include Part No. DT-11031, Brand DRIVETECH 4X4, Description Drivetech 4x4 Rocker 6 Switch Panel On - Off - SPST 12 or 24V, Mount Width 93mm, Switch Action On - Off - SPST, Lamp Colour/s Blue, Note Includes 40 Application Decals, Number of Positions 2, Item Type Switch Panel (Rocker).

Drivetech 4x4 Rocker 6 Switch Panel On - Off - SPST 12 or 24V. Part number DT-11031 should be checked first. Listed voltage is 12 or 24. Listed output rating is 20. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DT-11031, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output 20 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching part number DT-11031, the 93 x 157mm mounting hole size, and your vehicle’s 12V or 24V electrical setup before purchase.

FAQ

What is the part number for this switch panel?

The part number is DT-11031. For this listing, part number DT-11031 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What voltage systems does it suit?

It is listed for 12V or 24V systems. For this listing, part number DT-11031 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

How many switches does the panel control?

It is a six switch panel and can control up to six devices. For this listing, part number DT-11031 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What is the switch action?

The switch action is On-Off-SPST, with one pole and two positions. For this listing, part number DT-11031 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What are the mounting dimensions?

The mounting hole size is 93 x 157mm, with a mount width of 93mm and a mount length of 157mm. For this listing, part number DT-11031 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

Does it include switch labels?

Yes. It includes 40 application decals for customising the switch labels. For this listing, part number DT-11031 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.