Drivetech 4X4 Rocker Roof Lights Switch On/off Spst 12 Or 24V Blue Illumination 20A DT-11010

The Drivetech 4x4 rocker roof lights switch, part number DT-11010, is a 1-pole SPST on/off switch designed for 12V or 24V electrical systems. It uses a rocker-style action with blue illumination and is rated at 20A, with contacts rated 20A at 12V.

This switch is listed as a roof lights switch and uses a 5-terminal layout. The mounting opening is 36x20mm, with a stated mount length of 36mm and mount width of 20mm, so it suits installations where that panel size is available.

For buyers planning an accessory fit-out, the important checkpoints are the 12 or 24 volt operating range, the 20A power rating, and the illuminated blue lamp. Those details help confirm whether the switch suits the intended circuit and mounting space before any wiring work begins.

Key Features

• Rocker switch for roof lights
• On/Off SPST switching action
• Blue illuminated lamp
• Suitable for 12V or 24V systems
• 20A power rating
• 36x20mm mounting hole

Specifications

• Brand: Drivetech 4x4
• Part No.: DT-11010
• Type: Switch
• Switch type: Rocker
• Switch action: On - Off - SPST
• Number of poles: 1
• Number of positions: 2
• Number of terminals: 5

Application and Buying Notes

The main fitment check for this switch is the panel opening. It requires a 36x20mm mounting hole, so the dash, console, or switch panel should be measured carefully before purchase. A close visual match is not enough if the opening is smaller, larger, or shaped differently.

Electrical compatibility also matters. This is a 12 or 24 volt switch with a 20A power rating, and the contacts are rated 20A at 12V. That makes it important to match the switch to the intended circuit load rather than relying on appearance alone.

The 5-terminal layout and SPST on/off function indicate a simple single-circuit switch arrangement. That is suitable where a basic switching action is needed, but the wiring should still be checked against the vehicle or accessory setup before installation.

Blue illumination is included for visibility, which can be useful in low-light conditions. If you are replacing an existing switch, confirm that the existing wiring and terminal arrangement suit a 5-terminal illuminated rocker before ordering.

The part number DT-11010 is the clearest reference point for comparison. If you are matching a replacement switch, use the part number, mounting size, voltage range, and switch action together to verify that the item is the correct one for the job.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DT-11010 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Number of Terminals 5, Switch Action On - Off - SPST, Lamp Colour/s Blue, Number of Poles 1, Switch Type Rocker, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Additional published details for cross-checking include Part No. DT-11010, Brand DRIVETECH 4X4, Description Drivetech 4x4 Rocker Roof Lights Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V), Mount Width 20mm, Power Rating (Amp) 20, Voltage 12 or 24, Mount Length 36mm, Number of Positions 2, Switch Illumination Illuminated, Product Group 1 AUTO ELEC ACCESSORIES.

Drivetech 4x4 Rocker Roof Lights Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V). Part number DT-11010 should be checked first. Listed voltage is 12 or 24. Listed output rating is 20. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DT-11010, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output 20 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Please confirm fitment using part number DT-11010, the 36x20mm mounting opening, the 12 or 24 volt requirement, and the 5-terminal SPST layout before ordering.

FAQ

What is the part number for this switch?

The part number is DT-11010. For this listing, part number DT-11010 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What type of switch is it?

It is a rocker switch with an on/off SPST action and 1 pole. For this listing, part number DT-11010 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What voltage does it suit?

It is listed for 12 or 24 volt systems. For this listing, part number DT-11010 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

How many terminals does it have?

It has 5 terminals. For this listing, part number DT-11010 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What size mounting hole is required?

The listed mounting hole size is 36x20mm, with a mount width of 20mm and mount length of 36mm. For this listing, part number DT-11010 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

Is the switch illuminated?

Yes. It has blue illumination and is listed as an illuminated switch. For this listing, part number DT-11010 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.