Drivetech 4X4 Rocker Fridge Switch On/off Spst 12 Or 24V Blue Illumination DT-11011

The Drivetech 4x4 rocker fridge switch is an On/Off, SPST switch with blue illumination and a 5-terminal layout. It is specified for 12 or 24 volt applications and has contacts rated to 20A at 12V, making it a practical choice where a clearly marked illuminated control is needed for a fridge circuit or similar accessory use.

This switch uses a rocker style action with 2 positions: On and Off. The mounting size is listed at 36x20mm, with a 36mm mount length and 20mm mount width. Those dimensions are important to confirm before ordering, especially if you are replacing an existing panel switch and need the new unit to suit the cut-out already in place.

The part number is DT-11011 and the brand is Drivetech 4x4. It is sold as an each unit and carries a one year warranty. The blue lamp colour gives the switch clear visibility, which can be helpful in low light when the control is being used as part of an accessory switch panel.

Key Features

• Rocker style fridge switch
• On/Off SPST action
• Blue illuminated switch
• Suitable for 12 or 24 volt use
• 5 terminals
• 20A contacts at 12V

Specifications

• Brand: Drivetech 4x4
• Part number: DT-11011
• Type: Switch
• Switch type: Rocker
• Switch action: On - Off - SPST
• Number of poles: 1
• Number of positions: 2
• Number of terminals: 5

Application and Buying Notes

Before buying, confirm the switch opening in your panel is suitable for a 36x20mm mounting hole. The listed mount width is 20mm and mount length is 36mm, so the physical cut-out is the first check to make when replacing an existing fridge switch or adding a new one to an accessory panel.

The electrical side also needs to be matched correctly. This switch is listed for 12 or 24 volt use, and the contacts are rated at 20A at 12V. That rating is the key reference point when deciding whether it suits the circuit you intend to control. Always check the load requirements of the circuit before fitting any switch.

With 5 terminals, a single pole, and SPST On/Off operation, this switch is intended for straightforward control rather than multi-function switching. If your original switch uses a different terminal count, different pole arrangement, or a different switching action, compare those details carefully before ordering.

Blue illumination can be useful for identifying the switch at night or in dim cabin lighting, but illumination alone does not confirm electrical compatibility. The safest approach is to match the part number DT-11011 where possible, then confirm the mounting size, terminal count, voltage, and switch action against your existing setup.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DT-11011 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Number of Terminals 5, Switch Action On - Off - SPST, Lamp Colour/s Blue, Number of Poles 1, Switch Type Rocker, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Additional published details for cross-checking include Part No. DT-11011, Brand DRIVETECH 4X4, Description Drivetech 4x4 Rocker Fridge Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V), Mount Width 20mm, Power Rating (Amp) 20, Voltage 12 or 24, Mount Length 36mm, Number of Positions 2, Switch Illumination Illuminated, Product Group 1 AUTO ELEC ACCESSORIES.

Drivetech 4x4 Rocker Fridge Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V). Part number DT-11011 should be checked first. Listed voltage is 12 or 24. Listed output rating is 20. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DT-11011, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output 20 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Confirm fitment by matching part number DT-11011, the 36x20mm mounting size, 5 terminals, SPST On/Off action, and the stated 12 or 24 volt application before purchase.

FAQ

What is the part number for this switch?

The part number is DT-11011. For this listing, part number DT-11011 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What type of switch is it?

It is a rocker switch with On/Off SPST action and 1 pole. For this listing, part number DT-11011 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What voltage is it listed for?

It is listed for 12 or 24 volt use. For this listing, part number DT-11011 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

Does the switch light up?

Yes. It has blue illumination. For this listing, part number DT-11011 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What size cut-out does it need?

The listed mounting hole size is 36x20mm, with a 36mm mount length and 20mm mount width. For this listing, part number DT-11011 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

How many terminals does it have?

It has 5 terminals. For this listing, part number DT-11011 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.