Drivetech 4X4 Rocker Compressor Switch On/off Spst 12 Or 24V Blue Illumination 20A DT-11009

The Drivetech 4x4 Rocker Compressor Switch is a rocker-style switch with On/Off SPST operation, 5 terminals, and blue illumination. It is listed for 12 or 24 volt systems and has contacts rated at 20A @ 12V, with part number DT-11009.

This switch is intended for compressor control and uses a 36x20mm mounting hole, with a 36mm mount length and 20mm mount width. That makes the opening size an important check before purchase, especially where panel space is limited or an existing switch cut-out must be matched.

As a single pole, 2-position switch with illuminated blue lamp colour, it suits setups where a simple on/off control is needed and the switch position needs to be visible. The unit is sold each and carries a one year warranty.

Key Features

• Compressor switch
• On/Off - SPST
• Blue illumination
• 12 or 24 volt
• 36x20mm mounting hole
• 5 terminals

Specifications

• Brand: Drivetech 4x4
• Part No.: DT-11009
• Product type: Switch
• Switch action: On - Off - SPST
• Number of poles: 1
• Number of positions: 2
• Switch illumination: Illuminated
• Lamp colour: Blue

Application and Buying Notes

Before ordering, confirm the panel opening is 36x20mm and that there is enough room behind the dash or switch panel for a 36mm mount length and 5-terminal connection layout. The physical cut-out is just as important as the electrical rating when replacing an existing compressor switch.

Check that your system is either 12V or 24V, as this switch is listed for both voltages. It is rated at 20A, with the contacts specifically described as 20A @ 12V, so the load on the circuit should be kept within the stated rating for the application.

Because this is an On/Off SPST rocker switch, it is suitable for simple single-circuit control rather than multi-stage switching. Make sure the wiring arrangement, terminal count, and intended function match the switch action before fitting.

The blue illumination is useful where the switch needs to be easy to identify at night or in low light, but it should still be matched to the vehicle’s wiring and dash layout. If you are replacing an existing switch, compare the part number DT-11009 and the dimensions rather than relying on appearance alone.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DT-11009 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Number of Terminals 5, Switch Action On - Off - SPST, Lamp Colour/s Blue, Number of Poles 1, Switch Type Rocker, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Additional published details for cross-checking include Part No. DT-11009, Brand DRIVETECH 4X4, Description Drivetech 4x4 Rocker Compressor Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V), Mount Width 20mm, Power Rating (Amp) 20, Voltage 12 or 24, Mount Length 36mm, Number of Positions 2, Switch Illumination Illuminated, Product Group 1 AUTO ELEC ACCESSORIES.

Drivetech 4x4 Rocker Compressor Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V). Part number DT-11009 should be checked first. Listed voltage is 12 or 24. Listed output rating is 20. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DT-11009, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 or 24 and output 20 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Confirm fitment by checking the part number DT-11009, the 36x20mm mounting hole, the 5-terminal layout, and whether your vehicle or accessory circuit is 12 or 24V before ordering.

FAQ

What type of switch is this?

It is a rocker switch with On/Off SPST action and one pole. It has 2 positions and is intended for compressor control. For this listing, part number DT-11009 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What voltage does it suit?

It is listed for 12 or 24 volt systems. For this listing, part number DT-11009 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What is the current rating?

The switch is rated at 20A, with contacts rated 20A @ 12V. For this listing, part number DT-11009 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

How many terminals does it have?

It has 5 terminals. For this listing, part number DT-11009 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What size cut-out is required?

The mounting hole is 36x20mm, with a 36mm mount length and 20mm mount width. For this listing, part number DT-11009 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.

Is the switch illuminated?

Yes. It has blue illumination and is listed as an illuminated switch. For this listing, part number DT-11009 is the main reference point. Listed voltage is 12 or 24. Listed output rating is 20. These details should still be checked against the original unit before ordering.