OEX Alternator 12V 130A Valeo Style VXA046

The OEX VXA046 is a 12V alternator rated at 130A, supplied as a new unit and built in a Valeo style format. It uses an internal regulator, CW rotation, and a 7 groove pulley with a 60mm outside diameter, so matching the physical layout matters as much as matching the electrical rating.

This alternator is listed under OEX part number VXA046 and is identified with pin code IR206. The mounting setup is a quad leg design with 181mm mount centre-to-centre and an M10x1.25/11 adjusting hole diameter, which makes it important to compare the old unit carefully before ordering.

It is intended for applications that suit a Valeo unit and is listed against Hyundai Iload / H-1 and Hyundai iMax / H-1 applications in the supplied fitment data. As with any charging system component, the part number, mounting pattern, pulley section, and rotation should all be checked against the vehicle before fitment.

Key Features

• 12V alternator with 130A output
• New unit, not remanufactured
• Valeo style unit
• Internal regulator
• CW rotation
• 7 groove pulley

Specifications

• Voltage: 12V
• Power rating: 130A
• Rotation: CW
• Pulley section: 7 groove
• Pulley outside diameter: 60mm
• Regulator type: internal
• Mount type: quad leg
• Mount centre-to-centre: 181mm

Verified fitment notes

• Hyundai Iload / H-1
• Hyundai iMax / H-1
• Fitment data includes model-year references within these ranges, including 2008, 2012, and 2013 to 2018 for iMax / H-1

Application and Buying Notes

Before ordering, compare the OEX VXA046 against the original alternator on the vehicle. The critical checks here are the 12V system, 130A output rating, Valeo style application, internal regulator, CW rotation, and the 7 groove 60mm pulley. If any of these differ from the unit being replaced, the alternator may not match even if the vehicle model appears similar.

Mounting details are just as important as electrical output. This unit uses a quad leg mount, 181mm mount centre-to-centre, and an M10x1.25/11 adjusting hole diameter, so the bracket layout and adjustment point need to line up with the vehicle. A mismatch in mounting points or pulley section can stop the alternator from fitting correctly or aligning with the belt system.

The supplied fitment data points to Hyundai Iload / H-1 and Hyundai iMax / H-1 applications, but those model names alone are not enough to confirm fitment. The safest approach is to match the part number VXA046, pin code IR206, and the physical specifications against the old unit or vehicle details before purchase. This is especially important where multiple alternator styles may exist within the same model range.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number VXA046 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Pin Code IR206, Pulley Outside Diameter 60mm, Regulator Type Internal, Suits Unit Make Valeo, Alternator Mount Quad Leg, Mount Cnt to Cnt 181mm, Weight 6.28kg.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. VXA046, Brand OEX, Description OEX Alternator 12V 130A Valeo Style, Adjusting Hole Diameter M10x1.25/11, Power Rating (Amp) 130, Pulley Section 7 Groove, Rotation CW, Voltage 12, Item Type Alternator.

OEX Alternator 12V 130A Valeo Style. Part number VXA046 should be checked first. Listed voltage is 12. Listed output rating is 130. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Quad Leg. Regulator type is Internal. Pulley configuration is 7 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number VXA046, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 130 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include HYUNDAI ILOAD / H-1, HYUNDAI ILOAD / H-1 2008, HYUNDAI ILOAD / H-1 2012, HYUNDAI IMAX / H-1. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment using the part number VXA046, pin code IR206, mount layout, pulley section, rotation, and vehicle application details before ordering. Model name alone is not enough to guarantee compatibility.

FAQ

What is the part number for this alternator?

The OEX alternator part number is VXA046. For this listing, part number VXA046 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include HYUNDAI ILOAD / H-1, HYUNDAI ILOAD / H-1 2008, HYUNDAI ILOAD / H-1 2012. These details should still be checked against the original unit before ordering.

What voltage and output does it have?

It is a 12V alternator rated at 130A. For this listing, part number VXA046 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include HYUNDAI ILOAD / H-1, HYUNDAI ILOAD / H-1 2008, HYUNDAI ILOAD / H-1 2012. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

This alternator is listed as new. For this listing, part number VXA046 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include HYUNDAI ILOAD / H-1, HYUNDAI ILOAD / H-1 2008, HYUNDAI ILOAD / H-1 2012. These details should still be checked against the original unit before ordering.

What pulley and rotation details should I check?

It has a 7 groove pulley with a 60mm outside diameter and clockwise (CW) rotation. For this listing, part number VXA046 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include HYUNDAI ILOAD / H-1, HYUNDAI ILOAD / H-1 2008, HYUNDAI ILOAD / H-1 2012. These details should still be checked against the original unit before ordering.

What mounting details are listed?

The alternator uses a quad leg mount with 181mm mount centre-to-centre and an M10x1.25/11 adjusting hole diameter. For this listing, part number VXA046 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include HYUNDAI ILOAD / H-1, HYUNDAI ILOAD / H-1 2008, HYUNDAI ILOAD / H-1 2012. These details should still be checked against the original unit before ordering.

Which vehicles are shown in the fitment data?

The supplied fitment data lists Hyundai Iload / H-1 and Hyundai iMax / H-1 applications. You should still confirm the part number and physical specifications before ordering. For this listing, part number VXA046 is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include HYUNDAI ILOAD / H-1, HYUNDAI ILOAD / H-1 2008, HYUNDAI ILOAD / H-1 2012. These details should still be checked against the original unit before ordering.