Genuine Alternator 12V 130A Mitsubishi PAF118300A

This Genuine Alternator is a 12V, 130A unit for Mitsubishi applications and is listed under part number PAF118300A. It is a new alternator, supplied each, with an internal regulator and a quad leg mount arrangement, so matching the mounting style and electrical specification matters when replacing the unit.

The unit uses a 6 groove pulley with a 51mm outside diameter and a pivot hole diameter of 10.5 / M10x1.25. Those details are important for physical alignment and belt compatibility, especially when the existing alternator needs to match the same pulley section and mounting points.

At 5.56kg, this is a substantial rotating electrical component built for standard 12V charging systems. The listing also identifies the brand as Genuine Products and includes a 12 month warranty, which gives a clear reference point for buyers comparing an existing Mitsubishi alternator against a replacement option.

Key Features

• 12V alternator rated at 130A
• New unit, supplied each
• Internal regulator
• 6 groove pulley
• 51mm pulley outside diameter
• Quad leg alternator mount

Specifications

• Part number: PAF118300A
• Brand: Genuine Products
• Product type: Alternator
• Voltage: 12V
• Power rating: 130A
• New / remanufactured: New
• Regulator type: Internal
• Pulley section: 6 groove

Fitment guidance

• MAZDA: 3, 3 2019, CX-5, CX-5 2016

Application and Buying Notes

Before ordering, confirm the alternator part number PAF118300A against the unit being removed. The important physical checks on this listing are the 12V system voltage, 130A output, internal regulator, quad leg mount, 6 groove pulley, and the 10.5 / M10x1.25 pivot hole diameter.

The pulley details matter because a 6 groove belt needs the correct pulley section and outside diameter of 51mm to line up properly with the drive system. A mismatch here can affect installation even if the alternator appears close in size or shape.

The mount style also needs careful checking. This alternator is listed with a quad leg mount, so the bracket pattern should be compared to the original alternator before purchase. Weight alone is not enough to confirm interchange, but the 5.56kg listing can help when comparing like-for-like components.

This item is identified as suitable for Mitsubishi, but no specific model-by-model fitment has been verified here. If the vehicle application is uncertain, use the part number, mount style, pulley section, pivot hole size, and regulator type to compare the existing unit or consult the vehicle’s charging system details before committing to the purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number PAF118300A helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 12 Months, Pivot Hole Diameter 10.5 / M10x1.25, Pulley Outside Diameter 51mm, Regulator Type Internal, Voltage 12, Item Type Alternator, Weight 5.56kg, Product Group 1 ROTATING ELECTRICAL.

Additional published details for cross-checking include Part No. PAF118300A, Brand GENUINE PRODUCTS, Description Genuine Alternator 12V 130A Mitsubishi, Pin Code IR140, Power Rating (Amp) 130, Pulley Section 6 Groove, Suits Unit Make Mitsubishi, Alternator Mount Quad Leg, New / Reman. New.

Genuine Alternator 12V 130A Mitsubishi. Part number PAF118300A should be checked first. Listed voltage is 12. Listed output rating is 130. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Quad Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number PAF118300A, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 130 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching part number PAF118300A, the Mitsubishi application, 12V 130A output, internal regulator, quad leg mount, and 6 groove pulley details against the original alternator before ordering.

FAQ

What is the part number for this alternator?

The listed part number is PAF118300A. For this listing, part number PAF118300A is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include MAZDA 3, MAZDA 3 2019, MAZDA CX-5. These details should still be checked against the original unit before ordering.

Is this alternator new or remanufactured?

It is listed as new. For this listing, part number PAF118300A is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include MAZDA 3, MAZDA 3 2019, MAZDA CX-5. These details should still be checked against the original unit before ordering.

What voltage and output does it have?

This alternator is 12V with a power rating of 130A. For this listing, part number PAF118300A is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include MAZDA 3, MAZDA 3 2019, MAZDA CX-5. These details should still be checked against the original unit before ordering.

What regulator type is listed?

The alternator has an internal regulator. For this listing, part number PAF118300A is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include MAZDA 3, MAZDA 3 2019, MAZDA CX-5. These details should still be checked against the original unit before ordering.

What pulley details are provided?

The pulley is listed as 6 groove with a 51mm outside diameter. For this listing, part number PAF118300A is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include MAZDA 3, MAZDA 3 2019, MAZDA CX-5. These details should still be checked against the original unit before ordering.

What should I check before buying?

Check the part number PAF118300A, the Mitsubishi application, 12V system voltage, 130A rating, internal regulator, quad leg mount, and the 10.5 / M10x1.25 pivot hole diameter against the original alternator. For this listing, part number PAF118300A is the main reference point. Listed voltage is 12. Listed output rating is 130. Published fitment references include MAZDA 3, MAZDA 3 2019, MAZDA CX-5. These details should still be checked against the original unit before ordering.