Genuine Products Starter Motor 12V 11T CW Mitsubishi P5E118400

This Genuine Products starter motor is a new 12V unit with 11 teeth, clockwise rotation and part number P5E118400. It is listed for Mitsubishi applications and is described as original equipment, which is the key detail to check if you are replacing an existing starter motor with the same specification and mounting pattern.

The unit is supplied as a starter motor only, with a 2-hole starter mount type, 74mm flange diameter and 101mm mount centre-to-centre. Those measurements matter because starter fitment depends on the physical mounting setup as well as the electrical specification, not just the vehicle make.

Key physical details include an overall length of 180mm, pinion diameter of 35mm, 11 teeth and pinion at rest of 8mm. The unit weighs 2.7kg and carries a 12-month warranty, which gives you a clear benchmark when comparing it to the existing part removed from the vehicle.

Key Features

• New starter motor
• 12V electrical system
• 11-tooth pinion
• Clockwise rotation
• 2-hole starter mount
• Original equipment style

Specifications

• Part number: P5E118400
• Brand: Genuine Products
• Product type: Starter motor
• Voltage: 12V
• Rotation: CW
• Number of teeth: 11
• Mount hole diameter: M10x1.5 / 10
• Starter mount type: 2 hole

Fitment details

• Listed fitment includes Mazda, Mazda 3 and Mazda CX-3.
• Sample applications shown include Mazda 3 2018, Mazda CX-3 2018 and Mazda CX-3 2019.
• Match the part number, voltage, tooth count, rotation and mounting measurements before ordering.

Application and Buying Notes

The most important checks for this starter motor are the part number P5E118400, 12V rating, 11 teeth, clockwise rotation and the 2-hole mounting arrangement. Even where a vehicle is listed in fitment, the physical details still need to line up with the starter already in the car, especially the 74mm flange diameter and 101mm mount centre-to-centre.

If you are comparing against a removed unit, check the overall length of 180mm, pinion diameter of 35mm and pinion at rest of 8mm. These measurements are practical identifiers that help confirm whether the starter is the same style before installation. The unit is new and weighs 2.7kg, so it should be straightforward to compare with the existing assembly.

For Mitsubishi applications, the key compatibility point is that the product is identified as original equipment and suits Mitsubishi as the unit make. That is useful, but it still does not replace a direct check against the vehicle’s original starter, wiring arrangement and mounting layout. Use the part number and measurements together rather than relying on description alone.

The listed warranty is 12 months, which is a useful service benchmark, but it does not override fitment checks. If the vehicle has had prior modifications, a different engine variant, or a starter that has already been replaced, the safest approach is to compare the old unit side by side with this one before purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number P5E118400 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 12 Months, Mount Hole Diameter M10x1.5 / 10, Overall Length 180mm, Pinion Diameter 35mm, Suits Unit Make Mitsubishi, Item Type Starter Motor, New / Reman. New, Weight 2.7kg.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. P5E118400, Brand GENUINE PRODUCTS, Description Genuine Starter Motor 12V 11Th CW Mitsubishi, Flange Diameter 74mm, Number of Teeth 11, Pinion at Rest 8mm, Rotation CW, Voltage 12, Mount Cnt to Cnt 101mm.

Genuine Starter Motor 12V 11Th CW Mitsubishi. Part number P5E118400 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number P5E118400, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include MAZDA 3, MAZDA 3 2018, MAZDA CX-3, MAZDA CX-3 2018. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number P5E118400, 12V rating, 11-tooth CW configuration and the mounting measurements before ordering. Vehicle listings should be treated as a guide only if they align with the starter already fitted to the vehicle.

FAQ

What is the part number for this starter motor?

The part number is P5E118400. For this listing, part number P5E118400 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA 3, MAZDA 3 2018, MAZDA CX-3. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number P5E118400 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA 3, MAZDA 3 2018, MAZDA CX-3. These details should still be checked against the original unit before ordering.

What voltage does this starter motor use?

It is a 12V starter motor. For this listing, part number P5E118400 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA 3, MAZDA 3 2018, MAZDA CX-3. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 11 teeth. For this listing, part number P5E118400 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA 3, MAZDA 3 2018, MAZDA CX-3. These details should still be checked against the original unit before ordering.

What mounting setup does it use?

It uses a 2-hole starter mount with 101mm mount centre-to-centre and M10x1.5 / 10 mount hole diameter. For this listing, part number P5E118400 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA 3, MAZDA 3 2018, MAZDA CX-3. These details should still be checked against the original unit before ordering.

Does the listing include fitment information?

Yes. Listed fitment includes Mazda, Mazda 3 and Mazda CX-3, with sample applications shown for Mazda 3 2018, Mazda CX-3 2018 and Mazda CX-3 2019. For this listing, part number P5E118400 is the main reference point. Listed voltage is 12. Published fitment references include MAZDA 3, MAZDA 3 2018, MAZDA CX-3. These details should still be checked against the original unit before ordering.