Genuine Products Starter Motor 12V 11 Tooth CW Mitsubishi PER118400

This Genuine Products starter motor is a 12V unit for Mitsubishi applications and is listed under part number PER118400. It is a new starter motor with clockwise rotation, 11 teeth on the pinion, and a 1.2kW power rating, so it is intended for buyers matching a specific rotating electrical replacement rather than a universal fit.

The key physical checks on this unit are the 201mm overall length, 74mm flange diameter, 102mm mount centre-to-centre measurement, 2-hole starter mount type, and M10x1.5 / 10 mount hole diameter. Those dimensions matter when comparing against the original starter, especially where clearance, bolt pattern, and pinion engagement need to line up exactly.

A genuine-style replacement can be the right choice when you are matching a known Mitsubishi starter configuration and want to work from the part number and measurements rather than assumptions. The unit weighs 3.0kg, carries a 12 month warranty, and is described as original equipment for a guaranteed perfect fit, so checking the vehicle application and the existing starter details before ordering remains important.

Key Features

• 12V starter motor
• Clockwise rotation
• 11 tooth pinion
• 1.2kW power rating
• New unit
• 2-hole starter mount

Specifications

• Brand: Genuine Products
• Product type: Starter Motor
• Part No.: PER118400
• Voltage: 12V
• Rotation: CW
• Number of teeth: 11
• Power rating: 1.2kW
• Overall length: 201mm

Fitment guidance

• Listed suit: Mitsubishi
• Use part number PER118400 and the original unit measurements to confirm application
• Check 12V system requirement before purchase
• Confirm clockwise rotation matches the removed starter
• Verify the 2-hole mount, 102mm mount centre spacing, and M10x1.5 / 10 mounting points
• Compare the 11-tooth pinion, 35mm pinion diameter, and 8mm pinion at rest against the existing starter

Application and Buying Notes

Before ordering, match the part number PER118400, the Mitsubishi suit note, and the physical measurements on the starter already in the vehicle. The most useful checks here are the 12V electrical rating, clockwise rotation, 11-tooth pinion, and the 2-hole mount with 102mm mount centre-to-centre spacing, because those details determine whether the replacement lines up with the existing setup.

If you are replacing a failed starter, compare the old unit’s flange diameter, overall length, pinion diameter, and mounting hole size against the figures for this unit: 74mm flange diameter, 201mm overall length, 35mm pinion diameter, and M10x1.5 / 10 mount holes. Even when a starter looks similar, small differences in bolt pattern or pinion specification can stop it from fitting or engaging correctly.

This starter motor is listed as new and carries a 12 month warranty, which is useful for buyers wanting a current replacement rather than a remanufactured assembly. The 1.2kW power rating and 3.0kg weight give you additional reference points when comparing it with the original part, but the safest purchasing approach is still to confirm the application by part number and dimensions rather than by appearance alone.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number PER118400 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 12 Months, Mount Hole Diameter M10x1.5 / 10, Overall Length 201mm, Pinion Diameter 35mm, Rotation CW, Voltage 12, New / Reman. New, Weight 3.0kg.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. PER118400, Brand GENUINE PRODUCTS, Description Genuine Starter Motor 12V 11Th CW Mitsubishi, Flange Diameter 74mm, Number of Teeth 11, Pinion at Rest 8mm, Power Rating 1.2kW, Suits Unit Make Mitsubishi, Mount Cnt to Cnt 102mm.

Genuine Starter Motor 12V 11Th CW Mitsubishi. Part number PER118400 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number PER118400, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

Compatibility note: Confirm compatibility by matching part number PER118400, the Mitsubishi application, and the listed starter measurements and rotation before purchase.

FAQ

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number PER118400 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number PER118400 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What rotation does it use?

It is clockwise rotation, listed as CW. For this listing, part number PER118400 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 11 teeth. For this listing, part number PER118400 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What are the key mounting measurements?

The unit has a 2-hole starter mount, M10x1.5 / 10 mount hole diameter, and 102mm mount centre-to-centre spacing. For this listing, part number PER118400 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What should I check before buying?

Check part number PER118400, the Mitsubishi application, 12V requirement, clockwise rotation, 11-tooth pinion, and the listed mounting and size measurements against the starter you are replacing. For this listing, part number PER118400 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.