Genuine Products 12V Alternator Mitsubishi 23700AB051

This Genuine Products alternator is a new 12V unit for Mitsubishi applications and carries part number 23700AB051. It is listed as an alternator, with an internal regulator and a 6 groove pulley, so matching the electrical and mounting details is important before purchase.

The unit is described as new, supplied each, and backed by a 12 month warranty. Key physical checks include the twin leg alternator mount, 130mm centre-to-centre mount spacing, 57mm inside mounting legs, 8mm adjusting hole diameter, and a 52mm pulley outside diameter.

For buyers comparing replacements, the combination of 12V output, internal regulator, and Mitsubishi application details should be checked against the existing unit before ordering. The listed weight is 5.36kg, which can be useful when confirming the replacement against an original part or workshop notes.

Key Features

• Genuine Products alternator
• 12V electrical system
• New unit, supplied each
• Internal regulator
• 6 groove pulley
• Twin leg alternator mount

Specifications

• Item type: Alternator
• Product group: Rotating Electrical / Alternators
• Brand: Genuine Products
• Suits unit make: Mitsubishi
• Voltage: 12
• New / remanufactured: New
• Regulator type: Internal
• Pulley section: 6 groove

Fitment guidance

• SUBARU: FORESTER, FORESTER 2018

Application and Buying Notes

Confirm the existing alternator part number first. The key identifier here is 23700AB051, and that should be matched with the vehicle application and the removed unit wherever possible. The listing also identifies Mitsubishi as the suited unit make, so the replacement should be checked against your current alternator rather than assumed from the vehicle alone.

The mounting arrangement matters just as much as the electrical specification. This alternator uses a twin leg mount, 130mm centre-to-centre spacing, 57mm inside mounting legs, and an 8mm adjusting hole diameter. If any of those dimensions differ from the unit in the vehicle, the part may not install correctly even if the 12V rating looks similar.

The pulley specification is also worth checking carefully. A 6 groove pulley with a 52mm outside diameter needs to match the belt setup already fitted to the vehicle. If the belt type, pulley section, or offset on the existing alternator is different, the part should be verified before fitting.

The unit is fitted with an internal regulator, so it is best suited to vehicles that use that style of charging system. If the original alternator uses a different regulator arrangement, the replacement should be confirmed against the vehicle’s charging system layout and the part number on the old unit.

Weight can help with comparison when you have the old unit on hand. At 5.36kg, this alternator can be weighed and compared with the removed unit as one more check, but the part number, mount spacing, pulley section, and regulator type should remain the main points of reference.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 23700AB051 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 12 Months, Inside Mounting Legs 57mm, Pulley Section 6 Groove, Suits Unit Make Mitsubishi, Alternator Mount Twin Leg, Mount Cnt to Cnt 130mm, Weight 5.36kg, Product Group 1 ROTATING ELECTRICAL.

Additional published details for cross-checking include Part No. 23700AB051, Brand GENUINE PRODUCTS, Description Genuine Alternator 12V Mitsubishi, Adjusting Hole Diameter 8, Pulley Outside Diameter 52mm, Regulator Type Internal, Voltage 12, Item Type Alternator, New / Reman. New.

Genuine Alternator 12V Mitsubishi. Part number 23700AB051 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number 23700AB051, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

Compatibility note: Please confirm compatibility using the part number 23700AB051, the 12V rating, twin leg mount, 130mm centre-to-centre spacing, 57mm inside mounting legs, 8mm adjusting hole, 6 groove pulley, and the vehicle’s Mitsubishi application before ordering.

FAQ

What type of part is this?

This is a new alternator, supplied each, for Mitsubishi applications. For this listing, part number 23700AB051 is the main reference point. Listed voltage is 12. Published fitment references include SUBARU FORESTER, SUBARU FORESTER 2018. These details should still be checked against the original unit before ordering.

What is the part number?

The listed part number is 23700AB051. For this listing, part number 23700AB051 is the main reference point. Listed voltage is 12. Published fitment references include SUBARU FORESTER, SUBARU FORESTER 2018. These details should still be checked against the original unit before ordering.

What voltage does it use?

It is a 12V alternator. For this listing, part number 23700AB051 is the main reference point. Listed voltage is 12. Published fitment references include SUBARU FORESTER, SUBARU FORESTER 2018. These details should still be checked against the original unit before ordering.

What regulator type does it have?

It uses an internal regulator. For this listing, part number 23700AB051 is the main reference point. Listed voltage is 12. Published fitment references include SUBARU FORESTER, SUBARU FORESTER 2018. These details should still be checked against the original unit before ordering.

What pulley details are listed?

The pulley is a 6 groove design with a 52mm outside diameter. For this listing, part number 23700AB051 is the main reference point. Listed voltage is 12. Published fitment references include SUBARU FORESTER, SUBARU FORESTER 2018. These details should still be checked against the original unit before ordering.

What fitment checks matter most?

Match the part number 23700AB051, the Mitsubishi application, twin leg mount, 130mm centre-to-centre spacing, 57mm inside mounting legs, 8mm adjusting hole diameter, and 6 groove pulley before ordering. For this listing, part number 23700AB051 is the main reference point. Listed voltage is 12. Published fitment references include SUBARU FORESTER, SUBARU FORESTER 2018. These details should still be checked against the original unit before ordering.