OEX Starter Motor 24V 10 Tooth CW Denso Style DXS632

The OEX DXS632 starter motor is a new 24V unit with 10 teeth and clockwise rotation, supplied as a Denso style starter motor for applications that call for this configuration. It is listed as an insulated return unit and is noted as suitable for wet or dry clutch use, with a 3 hole starter mount and a Perkins mount style.

Key dimensions on this starter motor include 126mm mount centres A, 89mm mount centres C, an 89mm flange diameter, 11mm mount hole diameter, 330mm overall length, 40mm pinion diameter and 46mm pinion at rest. The unit weighs 8.2kg and is supplied new under OEX part number DXS632.

This is a 24 volt starter motor with a 1 year warranty and it is identified for Denso unit make applications. The listed features also note above ground installation, which can be important when confirming replacement arrangement and clearance before ordering.

Key Features

• 24V starter motor
• 10 tooth pinion
• Clockwise rotation
• Denso style unit
• Insulated return
• Perkins mount

Specifications

• Part number: DXS632
• Brand: OEX
• Voltage: 24V
• Number of teeth: 10
• Rotation: CW
• Starter mount type: 3 hole
• Mount centres A: 126mm
• Mount centres C: 89mm

Application and Buying Notes

Before ordering, confirm the 24V system requirement, the 10 tooth pinion count, and clockwise rotation against the starter already fitted to the machine. Those three details are fundamental on this DXS632 unit, because a change in voltage, rotation, or tooth count can stop the starter from engaging correctly.

The mounting arrangement should also be checked carefully. This starter is listed with a 3 hole mount, Perkins mount style, 126mm mount centres A, 89mm mount centres C, 89mm mount centres B, an 89mm flange diameter, and 11mm mount holes. If your existing unit differs in these dimensions, physical interchange should not be assumed.

Clearance is another practical check, especially with the 330mm overall length, 40mm pinion diameter, and 46mm pinion at rest measurement. The note about above ground use, plus the insulated return specification, can matter on equipment where mounting position and electrical return arrangement are part of the original design.

If you are replacing an older starter, compare the part number DXS632 and the application details rather than relying on appearance alone. The listing identifies this as a Denso style starter motor and notes a 12V version as DXS633 with an 18mm spacer and HXK-04 reference, so it is worth confirming you are matching the correct voltage and related configuration before purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS632 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 126mm, Mount Centres C 89mm, Number of Teeth 10, Pinion at Rest 46mm, Rotation CW, Voltage 24, Item Type Starter Motor.

Additional published details for cross-checking include Starter Mount Type 3 Hole, Insulated Return Yes, Product Group 2 STARTER MOTORS, Part No. DXS632, Brand OEX, Description OEX Starter Motor 24V 10Th CW Denso Style, Flange Diameter 89mm, Mount Centres B 89mm, Mount Hole Diameter 11.

OEX Starter Motor 24V 10Th CW Denso Style. Part number DXS632 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS632, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Confirm fitment by matching part number DXS632, 24V voltage, 10 tooth count, clockwise rotation, and the listed mounting dimensions and starter type before ordering.

FAQ

What voltage is this starter motor?

This OEX starter motor is 24V. For this listing, part number DXS632 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What is the part number?

The listed part number is DXS632. For this listing, part number DXS632 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

Is it clockwise or anti-clockwise rotation?

It is clockwise rotation, shown as CW. For this listing, part number DXS632 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The starter motor has 10 teeth. For this listing, part number DXS632 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What mounting details are listed?

The unit is listed with a 3 hole starter mount, Perkins mount style, 126mm mount centres A, 89mm mount centres C, 89mm mount centres B, 89mm flange diameter, and 11mm mount hole diameter. For this listing, part number DXS632 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

Is there a warranty on this starter motor?

Yes. The listed warranty is one year. For this listing, part number DXS632 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.