Genuine Products Alternator 12V 140A 06J903024AX Suit Golf Djhb S/S

This Genuine Products alternator is a new 12V unit with a 140A power rating and part number 06J903024AX. It is listed as a suit for Golf DJHB S/S, with a Valeo unit make, pad mount arrangement, and internal regulator.

As a rotating electrical component, alternator matching is best confirmed by the part number, mount style, pulley details, and output rating rather than by vehicle name alone. The key identifying details here are 12 volt, 140 amp, 6 groove pulley, 56mm pulley outside diameter, 8mm pivot hole diameter, and 163mm mount centre to centre.

Genuine Products states this alternator is from a leading OE manufacturer and supplier for many euro vehicles, with current and voltage measurements plus load and cycling tests carried out over 1,000 hours. It is supplied new, not remanufactured, and carries a one year warranty.

Key Features

• New alternator, not remanufactured
• 12V, 140A output
• Part number 06J903024AX
• Internal regulator
• 6 groove pulley
• 56mm pulley outside diameter

Specifications

• Brand: Genuine Products
• Product type: Alternator
• Item type: Alternator
• Power rating: 140 amp
• Voltage: 12V
• Unit of measure: Each
• Warranty: One year
• Part number: 06J903024AX

Fitment guidance

• Listed as suit Golf DJHB S/S
• Volkswagen Golf is shown in the fitment data, including model references from 2016 through 2020
• Use the part number 06J903024AX and the mounting measurements to confirm application before ordering

Application and Buying Notes

For alternators, the part number 06J903024AX is the safest starting point for confirming fitment. The vehicle listing points to Golf DJHB S/S, and the fitment data references Volkswagen Golf model years from 2016 through 2020, but the final check should always be against the existing unit and mounting details.

Measure the mounting arrangement on the vehicle before purchase. This unit is a pad mount alternator with a 163mm mount centre to centre, 70mm mount leg thickness, 8mm pivot hole diameter, and a 56mm pulley outside diameter. Those dimensions matter because a correct electrical rating alone does not ensure the alternator will physically line up.

The electrical specification is 12V and 140A, so it is intended to match a charging system designed for that output. The unit also uses an internal regulator and a 6 groove pulley. If the existing alternator differs in pulley section, mounting style, regulator type, or amperage, it should be checked carefully before fitment.

Because this is a new alternator and not a remanufactured unit, it is supplied as a fresh replacement component. The 7.38kg weight can also be useful as a cross-check when comparing against the original unit, especially where several versions were used across a model range.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 06J903024AX helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Pivot Hole Diameter 8, Pulley Outside Diameter 56mm, Regulator Type Internal, Voltage 12, Item Type Alternator, New / Reman. New.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. 06J903024AX, Brand GENUINE PRODUCTS, Description Genuine Alternator 12V 140A SUIT GOLF DJHB S/S, Mount Leg Thickness 70mm, Power Rating (Amp) 140, Pulley Section 6 Groove, Suits Unit Make Valeo, Alternator Mount Pad, Mount Cnt to Cnt 163mm.

Genuine Alternator 12V 140A SUIT GOLF DJHB S/S. Part number 06J903024AX should be checked first. Listed voltage is 12. Listed output rating is 140. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Pad. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number 06J903024AX, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 140 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility with part number 06J903024AX, the Golf DJHB S/S application, and the physical details listed here before ordering. If the existing alternator differs in mount style, pulley type, regulator type, or output rating, treat it as a separate application until verified.

FAQ

What is the part number for this alternator?

The part number is 06J903024AX. For this listing, part number 06J903024AX is the main reference point. Listed voltage is 12. Listed output rating is 140. Published fitment references include VOLKSWAGEN GOLF, VOLKSWAGEN GOLF 2016, VOLKSWAGEN GOLF 2017. These details should still be checked against the original unit before ordering.

Is this alternator new or remanufactured?

It is listed as new. For this listing, part number 06J903024AX is the main reference point. Listed voltage is 12. Listed output rating is 140. Published fitment references include VOLKSWAGEN GOLF, VOLKSWAGEN GOLF 2016, VOLKSWAGEN GOLF 2017. These details should still be checked against the original unit before ordering.

What are the electrical specifications?

It is a 12V alternator with a 140A power rating. For this listing, part number 06J903024AX is the main reference point. Listed voltage is 12. Listed output rating is 140. Published fitment references include VOLKSWAGEN GOLF, VOLKSWAGEN GOLF 2016, VOLKSWAGEN GOLF 2017. These details should still be checked against the original unit before ordering.

What type of regulator does it use?

It uses an internal regulator. For this listing, part number 06J903024AX is the main reference point. Listed voltage is 12. Listed output rating is 140. Published fitment references include VOLKSWAGEN GOLF, VOLKSWAGEN GOLF 2016, VOLKSWAGEN GOLF 2017. These details should still be checked against the original unit before ordering.

What mounting and pulley details are listed?

It has a pad mount, 163mm mount centre to centre, 70mm mount leg thickness, an 8mm pivot hole diameter, and a 56mm pulley outside diameter with a 6 groove pulley section. For this listing, part number 06J903024AX is the main reference point. Listed voltage is 12. Listed output rating is 140. Published fitment references include VOLKSWAGEN GOLF, VOLKSWAGEN GOLF 2016, VOLKSWAGEN GOLF 2017. These details should still be checked against the original unit before ordering.

What vehicle application is shown?

It is listed as suit Golf DJHB S/S, and the fitment data references Volkswagen Golf model years from 2016 to 2020. Final confirmation should still be made against the part number and mounting details. For this listing, part number 06J903024AX is the main reference point. Listed voltage is 12. Listed output rating is 140. Published fitment references include VOLKSWAGEN GOLF, VOLKSWAGEN GOLF 2016, VOLKSWAGEN GOLF 2017. These details should still be checked against the original unit before ordering.