Mahle Starter Motor 12V 10 Tooth CW MS74

The Mahle starter motor, part number MS74, is a 12V unit with a 10 tooth pinion and clockwise rotation. It is listed as a new starter motor with reduction gear and an Original Equipment part, which makes the key identifiers worth checking carefully before ordering.

This unit is specified with a 2.0kW power rating, 2 hole starter mount type, 127mm mount centres, and an 89mm flange diameter. The mount hole diameter is M10x1.5, and the pinion at rest measurement is 27mm, so it is important to confirm the physical mounting details against the vehicle application before purchase.

For buyers comparing replacements, the most relevant identifiers are the Mahle brand, MS74 part number, 12V voltage, 10 teeth, and CW rotation. Those details, along with the 29.7 flywheel depth specification and 40mm pinion diameter, help narrow the match to the correct starter arrangement rather than relying on appearance alone.

Key Features

• Mahle starter motor, part number MS74
• 12V electrical system
• 10 tooth pinion
• Clockwise rotation
• 2.0kW power rating
• New unit with reduction gear

Specifications

• Type: Starter motor
• Brand: Mahle
• Part No.: MS74
• Voltage: 12V
• Power rating: 2.0kW
• Rotation: CW
• Number of teeth: 10
• Transmission type: With reduction gear

Application and Buying Notes

Before ordering, compare the MS74 part number, 12V rating, 10 tooth pinion, and clockwise rotation with the starter already fitted to the vehicle. These are the most direct identifiers available and should be matched first, especially where multiple starter variants are used with similar housings or mounting patterns.

The mounting details are just as important as the electrical rating. This starter is a 2 hole design with 127mm mount centres, an 89mm flange diameter, and M10x1.5 mount holes, so the physical fit has to line up with the engine or bellhousing arrangement before the part can be considered suitable.

Flywheel engagement also needs attention. The listed pinion at rest is 27mm and the flywheel depth is 29.7, which means clearance and engagement depth should be checked against the application. A starter with the wrong depth or tooth count may bolt up but still be unsuitable for the vehicle.

The unit is described as new and as an Original Equipment part, and it carries a one year warranty. Even so, correct identification remains the buyer’s responsibility, because starter motors can differ by rotation, tooth count, mount style, and gear reduction setup across close-looking applications.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MS74 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 127mm, Number of Teeth 10, Pinion at Rest 27mm, Power Rating 2.0kW, Suits Unit Make Mahle, New / Reman. New, Transmission Type with reduction gear.

Additional published details for cross-checking include Number of mounting bores 2, For flywheel depth 29.7, Packaging length 25.0, Packaging height 13.60, Product Group 2 STARTER MOTORS, Part No. MS74, Brand MAHLE, Description Mahle Starter Motor 12V 10Th CW, Flange Diameter 89mm.

Mahle Starter Motor 12V 10Th CW. Part number MS74 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MS74, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

Compatibility note: Confirm compatibility using the Mahle MS74 part number, 12V specification, 10 tooth CW configuration, and the mounting and flywheel measurements listed above before ordering.

FAQ

What is the part number for this starter motor?

The part number is MS74. For this listing, part number MS74 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

Is this a 12V starter motor?

Yes. The listed voltage is 12V. For this listing, part number MS74 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

It has a 10 tooth pinion. For this listing, part number MS74 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What rotation does this starter motor use?

The rotation is clockwise, shown as CW. For this listing, part number MS74 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number MS74 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What mounting details are listed for fitment checking?

The listed mounting details are a 2 hole starter mount, 127mm mount centres, an 89mm flange diameter, and M10x1.5 mount hole diameter. For this listing, part number MS74 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.