OEX Alternator 12V 120A Mitsubishi Style MXA2115

The OEX Alternator MXA2115 is a new 12V, 120A alternator in Mitsubishi style, supplied as an each unit for rotating electrical applications. It uses an internal regulator, a pad mount arrangement, and a 6 groove pulley with a 60mm outside diameter, so the mounting and belt drive details need to line up with the vehicle before installation.

This alternator is listed with a part number of MXA2115, a mount centre to centre measurement of 167mm, and mount centres A of 84mm. Other key dimensions recorded are a 52mm mount leg thickness and an 11mm pivot hole diameter, which are the sorts of figures that matter when checking physical interchange.

OEX backs this alternator with a 3 year passenger / 1 year commercial warranty. The unit weight is 5.68kg, and the pin code is IR70. For buyers comparing replacements, those identifiers help narrow the match alongside the unit make reference to Mitsubishi and the stated 120 amp output.

Key Features

• New alternator, not remanufactured
• 12V output with 120A power rating
• Internal regulator
• Mitsubishi style unit
• Pad mount alternator design
• 6 groove pulley, 60mm outside diameter

Specifications

• Brand: OEX
• Product type: Alternator
• Unit of measure: Each
• Voltage: 12V
• Amperage: 120A
• Regulator type: Internal
• Alternator mount: Pad
• Pulley section: 6 groove

Fitment guidance

• Confirmed fitment information provided: Mitsubishi
• Sample applications shown: Mitsubishi Outlander
• Sample years shown in the fitment data: 2006, 2007, 2008, 2009, 2010, 2011, 2012

Application and Buying Notes

Before ordering, compare the part number MXA2115, the Mitsubishi style casing, and the pad mount layout against the unit currently fitted to the vehicle. The listed 12V, 120A output and internal regulator need to match the electrical system requirements, and the 6 groove pulley must align with the existing belt drive.

Physical measurements are just as important as the electrical rating. Check the 167mm mount centre to centre, 84mm mount centres A, 52mm mount leg thickness, and 11mm pivot hole diameter against the removed alternator or mounting bracket. A mismatch in any of these figures can stop the unit from fitting correctly, even where the vehicle make appears similar.

The fitment data supplied points to Mitsubishi applications, including Mitsubishi Outlander references across 2006 through 2012. That is useful as a guide, but final confirmation should always be made from the old unit, the mounting dimensions, and the electrical connector and pulley arrangement on the vehicle.

The warranty is 3 years for passenger use and 1 year for commercial use, so it is worth considering how the vehicle is used before purchase. At 5.68kg, this is a substantial rotating electrical component, so care during handling and installation is important to avoid damage to the housing, mounts, or pulley.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXA2115 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Leg Thickness 52mm, Pivot Hole Diameter 11, Pulley Outside Diameter 60mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 167mm, Weight 5.68kg.

Additional published details for cross-checking include Product Group 1 ROTATING ELECTRICAL, Part No. MXA2115, Brand OEX, Description OEX Alternator 12V 120A Mitsubishi Style, Mount Centres A 84mm, Pin Code IR70, Power Rating (Amp) 120, Pulley Section 6 Groove, Suits Unit Make Mitsubishi, Alternator Mount Pad.

OEX Alternator 12V 120A Mitsubishi Style. Part number MXA2115 should be checked first. Listed voltage is 12. Listed output rating is 120. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Pad. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MXA2115, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 120 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by matching the MXA2115 part number, Mitsubishi style specification, 12V 120A rating, internal regulator, pad mount design, 6 groove pulley, and the recorded mounting dimensions against the vehicle and the removed alternator before purchase.

FAQ

Is this alternator new or remanufactured?

It is listed as new. For this listing, part number MXA2115 is the main reference point. Listed voltage is 12. Listed output rating is 120. Published fitment references include MITSUBISHI OUTLANDER, MITSUBISHI OUTLANDER 2006, MITSUBISHI OUTLANDER 2007. These details should still be checked against the original unit before ordering.

What is the voltage and output rating?

This alternator is rated at 12V and 120A. For this listing, part number MXA2115 is the main reference point. Listed voltage is 12. Listed output rating is 120. Published fitment references include MITSUBISHI OUTLANDER, MITSUBISHI OUTLANDER 2006, MITSUBISHI OUTLANDER 2007. These details should still be checked against the original unit before ordering.

What type of regulator does it use?

It uses an internal regulator. For this listing, part number MXA2115 is the main reference point. Listed voltage is 12. Listed output rating is 120. Published fitment references include MITSUBISHI OUTLANDER, MITSUBISHI OUTLANDER 2006, MITSUBISHI OUTLANDER 2007. These details should still be checked against the original unit before ordering.

What is the pulley setup?

The pulley is a 6 groove design with a 60mm outside diameter. For this listing, part number MXA2115 is the main reference point. Listed voltage is 12. Listed output rating is 120. Published fitment references include MITSUBISHI OUTLANDER, MITSUBISHI OUTLANDER 2006, MITSUBISHI OUTLANDER 2007. These details should still be checked against the original unit before ordering.

Which part number should I check against my original unit?

The part number listed is MXA2115. For this listing, part number MXA2115 is the main reference point. Listed voltage is 12. Listed output rating is 120. Published fitment references include MITSUBISHI OUTLANDER, MITSUBISHI OUTLANDER 2006, MITSUBISHI OUTLANDER 2007. These details should still be checked against the original unit before ordering.

What vehicle applications are shown in the fitment data?

The supplied fitment data points to Mitsubishi applications, including Mitsubishi Outlander references for 2006 through 2012. Final fitment should still be confirmed against the part number and mounting dimensions. For this listing, part number MXA2115 is the main reference point. Listed voltage is 12. Listed output rating is 120. Published fitment references include MITSUBISHI OUTLANDER, MITSUBISHI OUTLANDER 2006, MITSUBISHI OUTLANDER 2007. These details should still be checked against the original unit before ordering.