Mahle Alternator 24V 110A MG802

The MAHLE alternator listed here is a 24V, 110A unit under part number MG802. It is supplied as a new alternator, not remanufactured, and it uses a twin leg alternator mount with inside mounting legs measured at 106mm.

This unit is specified with an 8 groove pulley, a pulley outside diameter of 61mm, a 13mm pivot hole diameter, and clockwise rotation. Those are the key physical checks to compare against the existing alternator before ordering, especially where mounting brackets and belt alignment need to match closely.

A multi function regulator is noted, and the pin code is IR98. The alternator is described as MAHLE brand, with compliance to international standards for electromagnetic compatibility, manufacture using the latest technologies and materials, and ISO 9001 certification.

For workshop planning and replacement matching, the important identifiers are the 24V system voltage, 110A output, MG802 part number, and the twin leg mounting arrangement. If any of those differ from the unit already fitted, confirmation is needed before purchase.

Key Features

• 24V alternator with 110A output
• New unit supplied each
• MAHLE brand
• Part number MG802
• Twin leg alternator mount
• 8 groove pulley

Specifications

• Voltage: 24V
• Power rating: 110A
• Part number: MG802
• Brand: MAHLE
• Type: Alternator
• Condition: New
• Unit of measure: Each
• Alternator mount: Twin leg

Application and Buying Notes

Before ordering, compare the MG802 part number, the 24V voltage, and the 110A output against the alternator currently fitted. Those three details are the quickest way to avoid a mismatch when replacing a unit in the charging system.

Mounting and belt drive dimensions matter on alternators as much as electrical output. This unit has a twin leg mount, 106mm inside mounting legs, a 13mm pivot hole diameter, an 8 groove pulley, and a 61mm pulley outside diameter, so the physical fit should be checked carefully against the existing unit and bracket layout.

The clockwise rotation and IR98 pin code are also important identifiers. If the current alternator differs in rotation, connector arrangement, or regulator style, do not assume interchangeability without checking the application details first.

Because fitment data has not been supplied, the safest approach is to match by part number and by the measured details listed here. If you are unsure, compare the old unit side by side with the new one before installation, especially where pulley alignment, mounting spacing, and connector position affect the job.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MG802 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Pin Code IR98, Power Rating (Amp) 110, Pulley Section 8 Groove, Suits Unit Make Mahle, Note Multi function regulator, New / Reman. New, Product Group 1 ROTATING ELECTRICAL.

Additional published details for cross-checking include Part No. MG802, Brand MAHLE, Description Mahle Alternator 24V 110A, Inside Mounting Legs 106mm, Pivot Hole Diameter 13, Pulley Outside Diameter 61mm, Rotation CW, Voltage 24, Alternator Mount Twin Leg.

Mahle Alternator 24V 110A. Part number MG802 should be checked first. Listed voltage is 24. Listed output rating is 110. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Pulley configuration is 8 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number MG802, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 and output 110 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility using the MG802 part number, 24V system voltage, 110A output, twin leg mount, 106mm inside mounting legs, 13mm pivot hole diameter, 8 groove pulley, 61mm pulley outside diameter, clockwise rotation, and IR98 pin code before ordering.

FAQ

What is the part number for this alternator?

The part number is MG802. For this listing, part number MG802 is the main reference point. Listed voltage is 24. Listed output rating is 110. These details should still be checked against the original unit before ordering.

What voltage and output does it have?

It is a 24V alternator with a 110A power rating. For this listing, part number MG802 is the main reference point. Listed voltage is 24. Listed output rating is 110. These details should still be checked against the original unit before ordering.

Is this alternator new or remanufactured?

It is listed as new. For this listing, part number MG802 is the main reference point. Listed voltage is 24. Listed output rating is 110. These details should still be checked against the original unit before ordering.

What mounting setup does it use?

It uses a twin leg alternator mount with inside mounting legs measured at 106mm and a 13mm pivot hole diameter. For this listing, part number MG802 is the main reference point. Listed voltage is 24. Listed output rating is 110. These details should still be checked against the original unit before ordering.

What pulley details are listed?

The pulley is listed as 8 groove, with a pulley outside diameter of 61mm. For this listing, part number MG802 is the main reference point. Listed voltage is 24. Listed output rating is 110. These details should still be checked against the original unit before ordering.

Does the listing include a warranty?

Yes. The listed warranty is one year. For this listing, part number MG802 is the main reference point. Listed voltage is 24. Listed output rating is 110. These details should still be checked against the original unit before ordering.