OEX Starter Motor 12V 10T CW Denso Style DXS4060

The OEX DXS4060 starter motor is a new 12V unit with a 10 tooth pinion, clockwise rotation, and Denso style fitment details. It suits a Denso unit make and is listed with a 2 hole starter mount, 111mm mount centres, and an overall length of 207mm.

This starter motor has a 76mm flange diameter, 11mm mount hole diameter, 28mm pinion diameter, and 53mm pinion at rest. It weighs 3kg and is supplied as each, which makes it straightforward to compare against the removed unit before ordering.

OEX backs this starter motor with a 3 year passenger and 1 year commercial warranty. OEX products are sourced from ISO certified factories and from original equipment manufacturers and aftermarket suppliers, which adds useful confidence when you are matching a replacement starter for the correct application.

Key Features

• New starter motor
• 12V electrical system
• 10 tooth pinion
• Clockwise rotation
• Denso style
• 2 hole starter mount

Specifications

• Part number: DXS4060
• Brand: OEX
• Product type: Starter motor
• Voltage: 12V
• Rotation: CW
• Number of teeth: 10
• Suits unit make: Denso
• Starter mount type: 2 hole

Fitment guide

• Supplied fitment references include Porsche 911, Porsche Boxster, and Porsche Cayman.
• Fitment previews also reference Porsche 911 model years from 2013 through 2019 and Porsche Boxster model years from 2014 through 2016.
• Use these references only as a guide and confirm the part number, mounting pattern, rotation, tooth count, and dimensions before fitting.

Application and Buying Notes

When replacing a starter motor, the key checks are the part number, mounting style, rotation, tooth count, and physical dimensions. This OEX unit is DXS4060, 12V, clockwise rotation, with 10 teeth, 111mm mount centres, a 76mm flange diameter, and a 207mm overall length, so it is important to compare those measurements against the original starter on the vehicle.

The starter is listed as Denso style and suits a Denso unit make, so that detail matters when you are matching a direct replacement. A 2 hole starter mount with 11mm mount hole diameter and 53mm pinion at rest should also be checked carefully, because even small differences in these areas can change whether the unit fits correctly.

If you are buying for a Porsche application, use the supplied fitment references as a starting point only. Vehicle build variations can exist, so confirm the removed part, the mounting layout, and the electrical specification before ordering. The 3kg weight can also be a practical comparison point when checking against the old unit.

For commercial use, the warranty is listed as 1 year, while passenger use is listed as 3 years. That does not replace the need to confirm fitment, but it does give a clear warranty reference once the correct starter has been selected.

A starter motor is best matched by facts rather than appearance alone. Compare the part number, the pinion tooth count, the clockwise rotation, and the flange and mount measurements so you are not relying on a visual match that may look close but differ in the details.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS4060 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 111mm, Number of Teeth 10, Pinion at Rest 53mm, Rotation CW, Voltage 12, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. DXS4060, Brand OEX, Description OEX Starter Motor 12V 10Th CW Denso Style, Flange Diameter 76mm, Mount Hole Diameter 11, Overall Length 207mm, Pinion Diameter 28mm, Suits Unit Make Denso, New / Reman. New.

OEX Starter Motor 12V 10Th CW Denso Style. Part number DXS4060 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS4060, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by matching DXS4060, the 12V CW specification, 10 tooth pinion, Denso style application, and the listed mounting and dimensional details against the original unit before purchase.

FAQ

What is the part number for this starter motor?

The part number is DXS4060. For this listing, part number DXS4060 is the main reference point. Listed voltage is 12. Published fitment references include PORSCHE 911, PORSCHE 911 2013, PORSCHE 911 2014. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number DXS4060 is the main reference point. Listed voltage is 12. Published fitment references include PORSCHE 911, PORSCHE 911 2013, PORSCHE 911 2014. These details should still be checked against the original unit before ordering.

What voltage and rotation does it have?

It is a 12V starter motor with clockwise (CW) rotation. For this listing, part number DXS4060 is the main reference point. Listed voltage is 12. Published fitment references include PORSCHE 911, PORSCHE 911 2013, PORSCHE 911 2014. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

It has 10 teeth. For this listing, part number DXS4060 is the main reference point. Listed voltage is 12. Published fitment references include PORSCHE 911, PORSCHE 911 2013, PORSCHE 911 2014. These details should still be checked against the original unit before ordering.

What mounting details are listed?

It is a 2 hole starter mount with 111mm mount centres and 11mm mount hole diameter. For this listing, part number DXS4060 is the main reference point. Listed voltage is 12. Published fitment references include PORSCHE 911, PORSCHE 911 2013, PORSCHE 911 2014. These details should still be checked against the original unit before ordering.

What warranty is listed?

The warranty is listed as 3 years for passenger use and 1 year for commercial use. For this listing, part number DXS4060 is the main reference point. Listed voltage is 12. Published fitment references include PORSCHE 911, PORSCHE 911 2013, PORSCHE 911 2014. These details should still be checked against the original unit before ordering.