OEX Starter Motor 12V 10 Tooth CCW Denso Style DXS654

This OEX starter motor is a new 12V unit with 10 teeth, counter-clockwise rotation, and a Denso style layout. The listed part number is DXS654, with a 0.8kW power rating, so it is important to compare the electrical and mounting details carefully before ordering.

Mounting and dimensional checks matter on starters, and this unit lists a 2-hole starter mount, 94mm mount centres, an M8x1.25 mount hole diameter, and a 61.5mm flange diameter. The overall length is 204mm, the pinion diameter is 30mm, and the pinion at rest is 25mm.

OEX describes its products as being sourced from market leading original equipment manufacturers and aftermarket suppliers, with factories that are ISO9001 certified to support engineering, testing, and quality control procedures. This starter is backed by a one-year warranty, which gives a clear support period for a part that needs to match the application correctly.

For buyers comparing replacements, the critical identifiers here are 12 volts, 10 teeth, CCW rotation, Denso style, and part number DXS654. Those details should be checked against the removed starter and the vehicle application before fitment.

Key Features

• New starter motor
• 12V electrical system
• 10 tooth pinion
• Counter-clockwise rotation
• Denso style design
• 2-hole starter mount

Specifications

• Part No.: DXS654
• Brand: OEX
• Product type: Starter motor
• Voltage: 12V
• Power rating: 0.8kW
• Rotation: CCW
• Number of teeth: 10
• Starter mount type: 2 hole

Fitment notes

• Fitment information supplied includes John Deere applications.
• Listed application families include John Deere Z930M, Z930R, and Z960M.
• Sample applications shown include John Deere Z930M 2015, Z930R 2015, and Z960M 2015.
• Confirm the removed starter matches the 12V, 10 tooth, CCW, Denso style layout and the mounting dimensions before ordering.

Application and Buying Notes

Starter motors are commonly matched by a combination of voltage, tooth count, rotation, mounting style, and physical dimensions. For this unit, the key points to verify are 12V, 10 teeth, CCW rotation, 2-hole mounting, 94mm mount centres, and the 61.5mm flange diameter.

The part number DXS654 is the most useful reference if you are replacing an existing starter. If the old unit is available, compare the pinion diameter at 30mm, the pinion at rest at 25mm, and the overall length of 204mm so you can avoid mismatches that may not be obvious from appearance alone.

This starter is a new part, not remanufactured, and it carries a one-year warranty. If your application is one of the listed John Deere models, it is still sensible to confirm the exact machine variant and the removed starter details rather than relying on model name alone.

Weight is listed at 3.28kg, which can be a useful cross-check when comparing units. If you are working from a worn or missing original starter, matching the mount hole diameter of M8x1.25 and the mount centres of 94mm can help confirm you are selecting the correct replacement.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS654 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 94mm, Number of Teeth 10, Pinion at Rest 25mm, Power Rating 0.8kW, Voltage 12, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. DXS654, Brand OEX, Description OEX Starter Motor 12V 10Th CCW Denso Style, Flange Diameter 61.5mm, Mount Hole Diameter M8x1.25, Overall Length 204mm, Pinion Diameter 30mm, Rotation CCW, New / Reman. New.

OEX Starter Motor 12V 10Th CCW Denso Style. Part number DXS654 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS654, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include JOHN DEERE Z930M, JOHN DEERE Z930M 2015, JOHN DEERE Z930R, JOHN DEERE Z930R 2015. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm fitment using part number DXS654, the 12V 10 tooth CCW Denso style specification, and the mounting measurements before purchase. Do not rely on appearance alone, and check the exact application details for your machine.

FAQ

What is the part number for this starter motor?

The listed part number is DXS654. For this listing, part number DXS654 is the main reference point. Listed voltage is 12. Published fitment references include JOHN DEERE Z930M, JOHN DEERE Z930M 2015, JOHN DEERE Z930R. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number DXS654 is the main reference point. Listed voltage is 12. Published fitment references include JOHN DEERE Z930M, JOHN DEERE Z930M 2015, JOHN DEERE Z930R. These details should still be checked against the original unit before ordering.

What voltage does this starter use?

It is a 12V starter motor. For this listing, part number DXS654 is the main reference point. Listed voltage is 12. Published fitment references include JOHN DEERE Z930M, JOHN DEERE Z930M 2015, JOHN DEERE Z930R. These details should still be checked against the original unit before ordering.

What rotation does this starter motor have?

The rotation is listed as CCW, which means counter-clockwise. For this listing, part number DXS654 is the main reference point. Listed voltage is 12. Published fitment references include JOHN DEERE Z930M, JOHN DEERE Z930M 2015, JOHN DEERE Z930R. These details should still be checked against the original unit before ordering.

What are the main mounting measurements?

The starter has a 2-hole mount, 94mm mount centres, an M8x1.25 mount hole diameter, and a 61.5mm flange diameter. For this listing, part number DXS654 is the main reference point. Listed voltage is 12. Published fitment references include JOHN DEERE Z930M, JOHN DEERE Z930M 2015, JOHN DEERE Z930R. These details should still be checked against the original unit before ordering.

Which applications are mentioned in the fitment information?

The fitment information supplied includes John Deere applications, with listed families including Z930M, Z930R, and Z960M, plus sample references such as 2015 variants. For this listing, part number DXS654 is the main reference point. Listed voltage is 12. Published fitment references include JOHN DEERE Z930M, JOHN DEERE Z930M 2015, JOHN DEERE Z930R. These details should still be checked against the original unit before ordering.