Mahle Starter Motor 24V 12T CW MS757 5.5KW 3 Hole

The MAHLE starter motor MS757 is a new 24V unit with clockwise rotation, 12 teeth, and a 5.5kW power rating. It is listed as an OE product and is supplied as a single each unit, which makes it a straightforward replacement where the application matches the mounting and electrical details.

Key dimensions include 126mm mount centres A, 126mm mount centres B, and 126mm mount centres C, with a 3 hole starter mount type and 13.5mm mounting hole diameter. The overall length is 321mm, the flange diameter is 92mm, and the pinion diameter is 45mm with a 48mm pinion at rest.

This starter is described as a Mahle unit with reduction gear transmission type, 12 teeth, and a flywheel depth listed at 51. When comparing it to the vehicle, the most important checks are voltage, rotation, tooth count, mount style, flange size, and the MS757 part number.

Key Features

• New starter motor
• 24V electrical system
• Clockwise rotation
• 12-tooth pinion
• 5.5kW power rating
• 3 hole starter mount

Specifications

• Brand: MAHLE
• Part number: MS757
• Product type: Starter motor
• Voltage: 24V
• Rotation: CW
• Number of teeth: 12
• Power rating: 5.5kW
• Starter mount type: 3 hole

Known fitment

• MAN TGA
• MAN TGA 2001
• MAN TGA 2002
• MAN TGA 2003
• MAN TGA 2004
• MAN TGA 2005
• MAN TGA 2006

Application and Buying Notes

Before ordering, match the MS757 part number, the 24V system requirement, and the clockwise rotation. Those three details are the fastest way to rule in or rule out a starter motor, especially when the vehicle uses a reduction gear starter with a 12-tooth pinion.

Physical fit matters as much as the electrical rating. Check the 3 hole starter mount, 126mm mount centres A/B/C, 92mm flange diameter, and 13.5mm mount hole diameter against the original starter and the mounting area on the vehicle.

The listed pinion diameter is 45mm, with a pinion at rest measurement of 48mm and a flywheel depth of 51. Those measurements are useful when comparing nose length and engagement geometry, particularly on heavy vehicle applications where starter offset must line up correctly.

If you are replacing a starter on a MAN TGA application, compare the vehicle’s existing unit carefully against the listed 24V, 12 tooth, CW configuration. Even where the model family is the same, starter variations can differ by mounting pattern, depth, or gear reduction arrangement.

A new OE product such as this MAHLE unit is intended as a direct replacement when the dimensions and electrical specification match. It is still sensible to verify the old starter, the mounting bores, and the overall length of 321mm before purchase, because those are the practical checks that prevent installation delays.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MS757 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty One Year, Mount Centres A 126mm, Mount Centres C 126mm, Number of Teeth 12, Pinion at Rest 48mm, Power Rating 5.5kW, Suits Unit Make Mahle, New / Reman. New.

Additional published details for cross-checking include Transmission Type with reduction gear, Number of mounting bores 3, For flywheel depth 51, Mounting points diameter 146, Packaging width 21.50, Net Weight 9350, Product Group 2 STARTER MOTORS, Part No. MS757, Brand MAHLE.

Mahle Starter Motor 24V 12Th CW. Part number MS757 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MS757, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by matching the MS757 part number, 24V specification, clockwise rotation, 12-tooth pinion, and the 3 hole mounting pattern with your existing starter and vehicle application.

FAQ

What is the part number for this starter motor?

The part number listed is MS757. For this listing, part number MS757 is the main reference point. Listed voltage is 24. Published fitment references include MAN TGA, MAN TGA 2001, MAN TGA 2002. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number MS757 is the main reference point. Listed voltage is 24. Published fitment references include MAN TGA, MAN TGA 2001, MAN TGA 2002. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

The starter motor is 24V. For this listing, part number MS757 is the main reference point. Listed voltage is 24. Published fitment references include MAN TGA, MAN TGA 2001, MAN TGA 2002. These details should still be checked against the original unit before ordering.

What is the rotation direction?

It is clockwise rotation, shown as CW. For this listing, part number MS757 is the main reference point. Listed voltage is 24. Published fitment references include MAN TGA, MAN TGA 2001, MAN TGA 2002. These details should still be checked against the original unit before ordering.

What applications are listed for fitment?

Listed fitment includes MAN TGA and MAN TGA 2001 through 2006. For this listing, part number MS757 is the main reference point. Listed voltage is 24. Published fitment references include MAN TGA, MAN TGA 2001, MAN TGA 2002. These details should still be checked against the original unit before ordering.

What are the key mounting details to check before ordering?

Check the 3 hole starter mount, 126mm mount centres A/B/C, 13.5mm mount hole diameter, 92mm flange diameter, and 321mm overall length. For this listing, part number MS757 is the main reference point. Listed voltage is 24. Published fitment references include MAN TGA, MAN TGA 2001, MAN TGA 2002. These details should still be checked against the original unit before ordering.