Narva Push/pull Switch On/off Spst Illuminated Red 10A 12V 60021BL

The Narva Push/Pull Switch On/Off SPST Illuminated Red is a panel-mount switch with a 12mm mounting diameter and 2 terminals. It is rated at 10A at 12V, making it suitable for a range of 12V automotive electrical applications where a simple on/off control is required.

This switch uses a push-pull action with a single pole, single throw layout and 2 positions. The lamp colour is red, and the switch is illuminated, which can make the control easier to locate in a fitted dashboard or accessory panel.

The part number is 60021BL and the unit is supplied each. It has a mounting opening of 12.2mm diameter and a mount length of 3mm, so the panel opening and available panel depth should be checked before installation.

Key Features

• Narva push/pull illuminated switch
• SPST on/off action with 2 positions
• 10A rating at 12V
• 2-terminal design
• 12mm mount diameter
• Red lamp colour

Specifications

• Brand: Narva
• Product type: Switch
• Part No.: 60021BL
• Power rating: 10A
• Voltage: 12V
• Number of poles: 1
• Number of terminals: 2
• Switch action: On - Off - SPST

Application and Buying Notes

Before ordering, compare the 12mm mount diameter and 12.2mm mounting opening with the panel you intend to use. This switch is designed as a panel mount unit, and the 3mm mount length means panel thickness and rear clearance should be checked as well, especially where wiring, brackets, or other controls sit behind the mounting face.

The electrical rating is 10A at 12V, so the connected circuit should remain within that limit. If the vehicle or accessory uses a different system voltage, note that the listed rating is 5A at 24V and the illumination uses a globe reference of 47283 for 24V. That makes the voltage and lamp arrangement an important check before fitting.

With 2 terminals and SPST on/off operation, this switch is intended for straightforward control of a single circuit. It does not provide any stated vehicle-specific fitment, so the correct approach is to confirm the part number 60021BL, the panel cut-out, the terminal arrangement, and the required switching action against the job at hand.

The illuminated red lens can be useful where switch visibility matters, but it should still be matched to the existing layout and the type of accessory being controlled. At 0.03kg, it is a light component, yet the practical checks remain the same: panel size, electrical load, voltage, and available space behind the dash or console.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 60021BL helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Power Rating (Amp) 10, Voltage 12, Mount Diameter 12mm, Number of Poles 1, Switch Type Push - Pull, Weight 0.03kg, Product Group 1 AUTO ELEC ACCESSORIES.

Additional published details for cross-checking include Part No. 60021BL, Brand NARVA, Description Narva Push/Pull Switch On/Off SPST Illuminated Red (Contacts Rated 10A @ 12V), Number of Terminals 2, Switch Action On - Off - SPST, Lamp Colour/s Red, Mount Length 3mm, Number of Positions 2, Switch Illumination Illuminated.

Narva Push/Pull Switch On/Off SPST Illuminated Red (Contacts Rated 10A @ 12V). Part number 60021BL should be checked first. Listed voltage is 12. Listed output rating is 10. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 60021BL, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 10 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Confirm compatibility by matching part number 60021BL, the 12mm mount diameter, the 12.2mm mounting opening, the 2-terminal SPST on/off layout, and the operating voltage before purchase. No vehicle-specific fitment is listed here, so final suitability should be checked against the application you are working on.

FAQ

What is the part number for this Narva switch?

The part number is 60021BL. For this listing, part number 60021BL is the main reference point. Listed voltage is 12. Listed output rating is 10. These details should still be checked against the original unit before ordering.

What voltage is this switch rated for?

It is rated at 12V, with a listed current rating of 10A at 12V and 5A at 24V. For this listing, part number 60021BL is the main reference point. Listed voltage is 12. Listed output rating is 10. These details should still be checked against the original unit before ordering.

Is this a push-pull or a push-button switch?

It is a push-pull switch with SPST on/off action. For this listing, part number 60021BL is the main reference point. Listed voltage is 12. Listed output rating is 10. These details should still be checked against the original unit before ordering.

How many terminals does it have?

It has 2 terminals. For this listing, part number 60021BL is the main reference point. Listed voltage is 12. Listed output rating is 10. These details should still be checked against the original unit before ordering.

What size mounting hole is required?

The listed mount diameter is 12mm, and the mounting opening is 12.2mm diameter. For this listing, part number 60021BL is the main reference point. Listed voltage is 12. Listed output rating is 10. These details should still be checked against the original unit before ordering.

Does it come with illumination?

Yes. The switch is illuminated and the lamp colour is red. For this listing, part number 60021BL is the main reference point. Listed voltage is 12. Listed output rating is 10. These details should still be checked against the original unit before ordering.