Narva Toggle Switch Off/on Spst Green Illuminated 20A 12V 60052BL

The Narva Toggle Switch Off/On SPST Green Illuminated is a 12V switch with contacts rated at 20A @ 12V only. It uses a toggle switch action with 2 positions and 3 terminals, and it is identified by part number 60052BL.

This switch is a single pole, single throw design with push-on terminals and green illumination. The mounting opening is 12.5mm diameter, with a 12mm mount diameter listed, so the panel opening is the key measurement to confirm before purchase.

Supplied as one each, this Narva switch weighs 0.015kg and carries a one year warranty. It sits within the auto electrical accessories range and is intended for applications where an illuminated 12V on/off toggle is required.

Because it is rated 20A @ 12V only, it is important to match the electrical load to the switch rating rather than assuming it can be used interchangeably with higher current equipment. The 3-terminal SPST layout and illuminated green lamp are practical identifiers when checking against an existing switch.

Key Features

• SPST toggle switch with 2 positions
• Green illuminated switch body
• Push-on terminals
• 3 terminals
• 20A @ 12V rating only
• 12.5mm mounting opening

Specifications

• Brand: Narva
• Part No.: 60052BL
• Voltage: 12V
• Power rating: 20A
• Switch type: Toggle
• Switch action: On - Off - SPST
• Number of poles: 1
• Number of terminals: 3

Application and Buying Notes

Before ordering, check the existing switch opening and confirm the panel can accept a 12.5mm mounting hole. The listed mount diameter is 12mm, and the supplied dimensions are the practical reference points for a clean install rather than relying on appearance alone.

Also confirm the circuit requirements match the 20A @ 12V rating. That rating applies to this switch as listed, so it should be matched carefully to the intended electrical load and not used as a substitute for a higher-rated component.

The switch uses an SPST on-off arrangement with 3 terminals and push-on connections. If you are replacing an existing switch, compare the terminal count, switch action, and illumination style so the wiring layout and dashboard appearance remain consistent.

Green illumination can be useful where the switch needs to be visible in low light, but the lamp colour and illuminated design should still be checked against the original application. The part number 60052BL is the best reference when comparing against an old or removed switch.

For buyers fitting into an existing panel, the 3mm mount length and 0.015kg weight are helpful reference points, but the main checks remain the hole size, terminal arrangement, and electrical rating. Those details determine whether the switch is a suitable replacement in practice.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 60052BL helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Power Rating (Amp) 20, Voltage 12, Mount Diameter 12mm, Number of Poles 1, Switch Type Toggle, Weight 0.015kg, Product Group 1 AUTO ELEC ACCESSORIES.

Additional published details for cross-checking include Part No. 60052BL, Brand NARVA, Description Narva Toggle Switch Off/On SPST Green Illuminated (Contacts Rated 20A @ 12V), Number of Terminals 3, Switch Action On - Off - SPST, Lamp Colour/s Green, Mount Length 3mm, Number of Positions 2, Switch Illumination Illuminated.

Narva Toggle Switch Off/On SPST Green Illuminated (Contacts Rated 20A @ 12V). Part number 60052BL should be checked first. Listed voltage is 12. Listed output rating is 20. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 60052BL, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 20 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by matching part number 60052BL, the 12.5mm mounting opening, 3-terminal SPST layout, green illumination, and the 20A @ 12V rating against the existing application before purchase.

FAQ

What is the part number for this switch?

The part number is 60052BL. For this listing, part number 60052BL is the main reference point. Listed voltage is 12. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What voltage is this Narva switch rated for?

It is rated for 12V. For this listing, part number 60052BL is the main reference point. Listed voltage is 12. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What is the current rating?

The switch is rated at 20A @ 12V only. For this listing, part number 60052BL is the main reference point. Listed voltage is 12. Listed output rating is 20. These details should still be checked against the original unit before ordering.

How many terminals does it have?

It has 3 terminals. For this listing, part number 60052BL is the main reference point. Listed voltage is 12. Listed output rating is 20. These details should still be checked against the original unit before ordering.

What size mounting hole is required?

The listed mounting opening is 12.5mm diameter, with a 12mm mount diameter also provided. For this listing, part number 60052BL is the main reference point. Listed voltage is 12. Listed output rating is 20. These details should still be checked against the original unit before ordering.

Is the switch illuminated?

Yes. It is an illuminated switch with green lamp colour. For this listing, part number 60052BL is the main reference point. Listed voltage is 12. Listed output rating is 20. These details should still be checked against the original unit before ordering.