Narva Heavy Duty Toggle Switch On/off/on Dpdt 25A 12V Part No. 60067BL

The Narva Heavy Duty Toggle Switch is a non-illuminated ON-OFF-ON DPDT switch with 6 terminals and push-on connections. It is rated at 25A at 12V, with a 12.5A rating at 24V, and suits panel mounting through a 12mm diameter opening.

This switch uses a 2-pole, 3-position toggle action and has a mount length of 6mm. The compact unit weighs 0.04kg, which makes it a practical choice where a sturdy manual control is needed without adding unnecessary bulk to the panel.

The part number is 60067BL and the product is covered by a one year warranty. If you are replacing an existing switch, the part number, terminal count, mounting size and ON-OFF-ON DPDT action are the key checks before ordering.

Key Features

• Narva heavy duty toggle switch
• ON-OFF-ON DPDT action
• 6 terminals with push-on terminals
• 25A @ 12V rating
• 12.5A @ 24V rating
• 12mm mounting opening

Specifications

• Brand: Narva
• Part No.: 60067BL
• Product type: Switch
• Switch type: Toggle
• Switch action: On - Off - On - DPDT
• Number of poles: 2
• Number of positions: 3
• Number of terminals: 6

Application and Buying Notes

Check the part number 60067BL against the switch you are replacing, then confirm the operating pattern is ON-OFF-ON and the contact layout is DPDT. A switch with 6 terminals and push-on connections will not suit every existing wiring setup, so the terminal style matters as much as the electrical rating.

The 12mm mounting opening is one of the most important measurements to verify before purchase. Even when the switch type is correct, the panel hole, mount length of 6mm and available clearance behind the panel need to suit the installation point.

Electrical capacity also needs to match the application. This Narva switch is rated at 25A at 12V and 12.5A at 24V, so the load and system voltage must be checked carefully. If the circuit demand is higher than the stated rating, the switch is not the right choice.

Because this is a non-illuminated toggle switch, it does not provide lamp feedback. That is worth confirming if the original switch had an indicator light or if you need a visible on/off status. The listed lamp colour is not applicable, so it is intended for use without switch illumination.

For the most reliable result, compare the old switch’s physical dimensions, terminal arrangement and action before fitting. The weight is only 0.04kg and the unit is designed as a panel mount switch, so it suits straightforward dashboard or control panel installations where the hole size and wiring style already align.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 60067BL helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty One Year, Power Rating (Amp) 25, Voltage 12, Mount Diameter 12mm, Number of Poles 2, Switch Type Toggle, Weight 0.04kg, Product Group 1 AUTO ELEC ACCESSORIES.

Additional published details for cross-checking include Part No. 60067BL, Brand NARVA, Description Narva Heavy Duty Toggle Switch On/Off/On DPDT (Contacts Rated 25A @ 12V), Number of Terminals 6, Switch Action On - Off - On - DPDT, Lamp Colour/s Not Applicable, Mount Length 6mm, Number of Positions 3, Switch Illumination Non Illuminated.

Narva Heavy Duty Toggle Switch On/Off/On DPDT (Contacts Rated 25A @ 12V). Part number 60067BL should be checked first. Listed voltage is 12. Listed output rating is 25. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 60067BL, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 25 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by matching part number 60067BL, ON-OFF-ON DPDT action, 6 terminals, 12mm mounting opening and the required 25A at 12V or 12.5A at 24V rating before purchase.

FAQ

What is the part number for this Narva switch?

The part number is 60067BL. For this listing, part number 60067BL is the main reference point. Listed voltage is 12. Listed output rating is 25. These details should still be checked against the original unit before ordering.

What type of switch is it?

It is a heavy duty toggle switch with ON-OFF-ON DPDT action and 2 poles, 3 positions. For this listing, part number 60067BL is the main reference point. Listed voltage is 12. Listed output rating is 25. These details should still be checked against the original unit before ordering.

What electrical rating does it have?

It is rated at 25A at 12V and 12.5A at 24V. For this listing, part number 60067BL is the main reference point. Listed voltage is 12. Listed output rating is 25. These details should still be checked against the original unit before ordering.

What size panel hole does it need?

The mounting opening is 12mm diameter, with a mount length of 6mm. For this listing, part number 60067BL is the main reference point. Listed voltage is 12. Listed output rating is 25. These details should still be checked against the original unit before ordering.

How many terminals does it have?

It has 6 terminals and uses push-on terminals. For this listing, part number 60067BL is the main reference point. Listed voltage is 12. Listed output rating is 25. These details should still be checked against the original unit before ordering.

Is the switch illuminated?

No. It is listed as non illuminated, and lamp colour is not applicable. For this listing, part number 60067BL is the main reference point. Listed voltage is 12. Listed output rating is 25. These details should still be checked against the original unit before ordering.