Tridon Stop Light Switch TBS006 M10 X 1.25 Normally Closed

The Tridon Stop Light Switch is a switch type part supplied as each, with part number TBS006 and a two year warranty. It is identified as a normally closed circuit switch with a 14 mm spanner size and M10 x 1.25 thread, which are the main physical checks to confirm before ordering.

This stop light switch sits in the auto elec accessories group and the fuses breakers relays switches product group. For a brake light circuit application, the key details are the M10 x 1.25 thread, the 14 mm spanner requirement, and the normally closed circuit arrangement, as these must match the vehicle’s switch location and electrical setup.

Tridon is the listed brand, and the product is sold as a single unit. If you are replacing a failed stop light switch, matching the part number TBS006 and confirming the thread and circuit type are the safest starting points before comparing against the vehicle’s original switch.

Key Features

• Tridon stop light switch
• Part number: TBS006
• Thread: M10 x 1.25
• Spanner: 14 mm
• Circuit: Normally closed
• Sold as each

Specifications

• Brand: Tridon
• Product type: Switch
• Description: Tridon Stop Light Switch
• Unit of measure: Each
• Warranty: Two years
• Part number: TBS006
• Spanner size: 14 mm
• Thread size: M10 x 1.25

Fitment guidance

• Fitment references include Hyundai Coupe, Hyundai Excel, Hyundai Lantra, Hyundai S Coupe and Hyundai Sonata.
• Fitment references also include Toyota 4 Runner, Toyota Chaser, Toyota Corolla, Toyota Cressida, Toyota Cresta, Toyota Crown, Toyota Dyna, Toyota Dyna 100, Toyota Dyna 150, Toyota Dyna 200, Toyota Hiace, Toyota Land Cruiser, Toyota Liteace, Toyota Master Ace, Toyota Master Ace Surf, Toyota MR2, Toyota Spacia and Toyota Tarago.
• Model-year references visible in the fitment data include Hyundai Coupe 1996 to 2002, Hyundai Excel 1987 to 1989, Toyota 4 Runner 1988 to 1989, Toyota Chaser 1988 to 1992, and Toyota Corolla 1988.

Application and Buying Notes

Before buying, check the original switch thread and tool size against the listed M10 x 1.25 thread and 14 mm spanner size. Those two details are usually the quickest way to rule a part in or out when you are replacing a stop light switch in an existing threaded housing.

The circuit type is listed as normally closed, so the electrical behaviour needs to align with the vehicle’s original switch. If the old part is available, compare it directly with the Tridon TBS006 and confirm the same switching style before fitting.

Fitment references are broad across selected Hyundai and Toyota models, but they should still be treated as a guide rather than a guarantee. Vehicle range, year, and variation can change the correct switch, so the most reliable checks are the part number, thread size, and circuit type.

This is a single switch sold each, so it suits a direct replacement when the original unit is known. If you are dealing with an intermittent brake light fault, the switch itself is only one part of the circuit, so confirm the wiring, adjustment, and connector condition as well as the mechanical thread match.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number TBS006 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty Two Years, Product Group 1 AUTO ELEC ACCESSORIES, Part No. TBS006, Brand TRIDON, Description Tridon Stop Light Switch, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Tridon Stop Light Switch. Part number TBS006 should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number TBS006, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include HYUNDAI COUPE, HYUNDAI COUPE 1996, HYUNDAI COUPE 1997, HYUNDAI COUPE 1998, TOYOTA 4 RUNNER, TOYOTA 4 RUNNER 1988. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is Two Years. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm compatibility by matching part number TBS006, the M10 x 1.25 thread, the 14 mm spanner size, and the normally closed circuit against the vehicle’s original stop light switch and application details before purchase.

FAQ

What is the part number for this stop light switch?

The part number is TBS006. For this listing, part number TBS006 is the main reference point. Published fitment references include HYUNDAI COUPE, HYUNDAI COUPE 1996, HYUNDAI COUPE 1997. These details should still be checked against the original unit before ordering.

What thread does this switch use?

It uses an M10 x 1.25 thread. For this listing, part number TBS006 is the main reference point. Published fitment references include HYUNDAI COUPE, HYUNDAI COUPE 1996, HYUNDAI COUPE 1997. These details should still be checked against the original unit before ordering.

Is this switch normally open or normally closed?

It is listed as a normally closed circuit switch. For this listing, part number TBS006 is the main reference point. Published fitment references include HYUNDAI COUPE, HYUNDAI COUPE 1996, HYUNDAI COUPE 1997. These details should still be checked against the original unit before ordering.

What size spanner is needed?

The listed spanner size is 14 mm. For this listing, part number TBS006 is the main reference point. Published fitment references include HYUNDAI COUPE, HYUNDAI COUPE 1996, HYUNDAI COUPE 1997. These details should still be checked against the original unit before ordering.

How is this item sold?

It is sold as each, meaning one switch per unit. For this listing, part number TBS006 is the main reference point. Published fitment references include HYUNDAI COUPE, HYUNDAI COUPE 1996, HYUNDAI COUPE 1997. These details should still be checked against the original unit before ordering.

What should I confirm before ordering?

Match the part number TBS006, the M10 x 1.25 thread, the 14 mm spanner size, and the normally closed circuit to the vehicle’s original stop light switch and application details. For this listing, part number TBS006 is the main reference point. Published fitment references include HYUNDAI COUPE, HYUNDAI COUPE 1996, HYUNDAI COUPE 1997. These details should still be checked against the original unit before ordering.