Tridon Stop Light Switch TBS014 M10 X 1.25 Normally Closed

The Tridon Stop Light Switch, part number TBS014, is a vehicle control switch supplied as each and identified with a 2 year warranty. It is listed with a 14 mm spanner size, M10 x 1.25 thread, and a normally closed circuit, which are the key details to check before ordering or comparing against an existing unit.

Stop light switches are straightforward parts, but the thread size and circuit type need to match the vehicle application exactly. This Tridon switch is a normally closed design, so it is important to confirm the original switch specification and the physical thread before fitting.

For workshop or retail buyers, the useful identifiers here are the Tridon brand, TBS014 part number, M10 x 1.25 thread, and 14 mm hex. Those details provide a practical starting point when cross-checking the replacement against the removed switch or vehicle listing.

The product sits in the auto electrical accessories range and is grouped with fuses, breakers, relays and switches. If you are replacing a brake light switch, the safest approach is to match the part number and the stated switch characteristics rather than relying on appearance alone.

Key Features

• Tridon stop light switch
• Part number: TBS014
• Thread: M10 x 1.25
• Spanner size: 14 mm
• Circuit: Normally closed
• Supplied each

Specifications

• Brand: Tridon
• Product type: Switch
• Description: Stop light switch
• Part number: TBS014
• Thread size: M10 x 1.25
• Spanner size: 14 mm
• Circuit type: Normally closed
• Unit of measure: Each

Fitment guidance

• Fitment data references a range of makes including Chrysler, Ford, Holden, Lexus, Mazda, Mitsubishi, Suzuki and Toyota.
• Listed applications include Chrysler Galant, Ford Courier, Ford Econovan, Holden Apollo, Holden Barina, Lexus RX, Mazda 626, Mitsubishi Delica, Mitsubishi Express, Suzuki Swift, Suzuki Vitara and Toyota 4 Runner.
• Year references shown in the fitment data include Ford Econovan 1997 to 2004, Holden Apollo 1992 to 1993, Holden Barina 1992 to 1994, Lexus RX 1998 to 2003, Mazda 626 1998 to 2002, Mitsubishi Delica 1992 to 1998, Suzuki Swift 1992 to 2000, Suzuki Vitara 1993, and Toyota 4 Runner 1993 to 1996.
• The fitment list also includes Toyota Camry and Toyota Estima Emina / Lucida for 1993 to 1996, along with other model entries in the supplied application data.
• Because switch fitment depends on thread, circuit style and vehicle application, the part number and the removed switch details should be checked carefully before purchase.

Application and Buying Notes

When selecting a stop light switch, the most important checks are the thread size, spanner size and circuit type. This Tridon unit uses M10 x 1.25 threading, a 14 mm spanner, and a normally closed circuit, so those details need to line up with the original part or the vehicle application.

If you are comparing against an old switch, use the part number TBS014 as the primary reference and confirm the physical fit around the mounting point. Even a small mismatch in thread pitch or circuit type can prevent correct installation or operation, so it is worth verifying the removed part before fitting the replacement.

The supplied fitment data spans a wide range of older Chrysler, Ford, Holden, Lexus, Mazda, Mitsubishi, Suzuki and Toyota applications. That does not replace a proper vehicle check; it simply indicates that the part belongs in a broad application range where the exact model, year and original switch specification still matter.

For buyers working on brake lamp faults, a stop light switch is one possible cause, but it should be matched to the vehicle’s original arrangement rather than assumed. Confirm the application using the part number, the thread specification and the circuit type, especially if the vehicle has had previous repairs or substitutions.

The two year warranty gives added buying confidence on the product itself, but it does not replace fitment verification. Before ordering, compare the switch against the original unit, review the model and year details in the application list, and make sure the mount uses the same M10 x 1.25 thread and normally closed layout.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number TBS014 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty Two Years, Product Group 1 AUTO ELEC ACCESSORIES, Part No. TBS014, Brand TRIDON, Description Tridon Stop Light Switch, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Tridon Stop Light Switch. Part number TBS014 should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number TBS014, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

Compatibility note: Please confirm fitment by matching part number TBS014, the M10 x 1.25 thread, the 14 mm spanner size and the vehicle application details before purchase.

FAQ

What is the part number for this stop light switch?

The part number is TBS014.

What thread does this switch use?

It uses an M10 x 1.25 thread.

Is the circuit normally open or normally closed?

It is listed as a normally closed circuit.

What size spanner is needed on the switch body?

The switch is listed with a 14 mm spanner size.

What warranty is supplied with this Tridon switch?

It is supplied with a two year warranty.

Can fitment be confirmed from the product details alone?

No. Fitment should be confirmed using the part number TBS014, the M10 x 1.25 thread, the normally closed circuit detail and the vehicle application information supplied for the item.