Projecta Mega Fuse 100A Yellow Maxi Fuse 68MM Part No. BT950-100

The Projecta Mega Fuse 100A is a single-piece automotive fuse identified by part number BT950-100. It is listed as a blade fuse, with a Mega fuse type and a 100 amp rating, and the item length is 68mm.

This fuse is described as a 100 Amp Yellow Maxi Fuse and is supplied as 1 piece. The product weight is 0.02kg, which reflects a small, lightweight electrical component intended for suitable fuse holder applications.

The listed compatibility cue is "To Suit - BT950-P1", so the safest buying check is to confirm the fuse holder or application matches that reference as well as the BT950-100 part number. A correct match matters because Mega and Maxi-style fuses are not interchangeable unless the holder and rating suit the same format.

Key Features

• Projecta Mega Fuse
• 100A rating
• Yellow Maxi Fuse
• Blade fuse type
• Single piece pack
• Suitable for BT950-P1

Specifications

• Brand: Projecta
• Part No.: BT950-100
• Amps: 100A
• Fuse type: Mega
• Item type: Blade Fuse
• Length: 68mm
• Pack qty: 1
• Unit of measure: Each

Application and Buying Notes

Before ordering, check the fuse holder and application against the BT950-100 part number and the stated suitability for BT950-P1. The important details here are the 100A rating, Mega fuse type, and 68mm length, because the physical size and current rating need to match the holder and circuit requirements.

This is a single 100 amp yellow maxi-style fuse, so it should be selected only where that exact amperage and fuse format are required. If the system calls for a different amperage, a different fuse family, or a different physical size, do not substitute it on appearance alone.

The listed one-year warranty applies to the product as supplied. As with any fuse, the correct choice depends on the vehicle or accessory circuit design, so verify the fuse box, holder, and existing fuse markings before purchase. Matching the part number BT950-100 is the most reliable way to confirm you are looking at the right item.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number BT950-100 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type FUSE, Unit of Measure EACH, Warranty One Year, Amps 100A, Item Type Blade Fuse, Weight 0.02kg, Product Group 1 AUTO ELEC ACCESSORIES, Part No. BT950-100, Brand PROJECTA, Description Projecta Mega Fuse 100A 1 Pce.

Additional published details for cross-checking include Length 68mm, Fuse Type Mega, Pack Qty 1, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Projecta Mega Fuse 100A 1 Pce. Part number BT950-100 should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number BT950-100, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a fuse in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment using part number BT950-100 and the application reference BT950-P1 before ordering. If the fuse holder, fuse family, amperage, or length does not match, do not assume compatibility.

FAQ

What is the part number for this fuse?

The part number is BT950-100. For this listing, part number BT950-100 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number BT950-100 is the main reference point. These details should still be checked against the original unit before ordering.

What amperage is this fuse?

It is rated at 100A. For this listing, part number BT950-100 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number BT950-100 is the main reference point. These details should still be checked against the original unit before ordering.

What type of fuse is it?

It is listed as a Mega fuse and an item type of blade fuse. For this listing, part number BT950-100 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number BT950-100 is the main reference point. These details should still be checked against the original unit before ordering.

How many fuses are included?

The pack quantity is 1, so it is supplied as a single piece. For this listing, part number BT950-100 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number BT950-100 is the main reference point. These details should still be checked against the original unit before ordering.

What is the length of the fuse?

The listed length is 68mm. For this listing, part number BT950-100 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number BT950-100 is the main reference point. These details should still be checked against the original unit before ordering.

What should I check before buying?

Confirm the BT950-100 part number, the BT950-P1 application reference, the 100A rating, and the 68mm length to make sure the fuse and holder are a match. For this listing, part number BT950-100 is the main reference point. These details should still be checked against the original unit before ordering.