Projecta Mega Fuse 250A Blade Fuse BT950-250

The Projecta Mega Fuse 250A is a single blade fuse supplied as 1 piece, with Part No. BT950-250 and a 68mm length. It is listed as a 250 Amp pink Maxi fuse and sits within Projecta’s auto electrical accessories range.

This fuse is identified as a Mega fuse type and is intended for applications that call for a 250A fuse rating. The unit of measure is each, with a pack quantity of 1, and the listed weight is 0.015kg.

The product is shown as suitable for BT950-P1. When replacing a fuse, the most important checks are the fuse type, current rating, physical size, and the application reference, because all four need to match the circuit or holder being used.

Key Features

• Projecta Mega fuse type
• 250A current rating
• Pink Maxi fuse style
• Supplied as 1 piece
• Part No. BT950-250
• Suitable for BT950-P1

Specifications

• Brand: Projecta
• Product type: Fuse
• Fuse type: Mega
• Item type: Blade fuse
• Amps: 250A
• Length: 68mm
• Pack qty: 1
• Unit of measure: Each

Application and Buying Notes

Before ordering, confirm that your application calls for a 250A Mega fuse and that the holder or circuit is designed for the 68mm fuse length. The key identifiers here are the Projecta Part No. BT950-250, the 250 Amp rating, and the note that it is suitable for BT950-P1.

Fuse replacement should always be done by matching the existing fuse type and rating, rather than relying on appearance alone. A blade fuse in the Mega format is not interchangeable with smaller blade styles unless the holder specifically accepts that size and format.

The listed 250A rating is the critical electrical specification. Using the wrong amperage can cause nuisance failure if it is too low, or leave a circuit insufficiently protected if it is too high. If you are unsure, compare the existing fuse, the holder markings, and the application reference before fitting.

Because this item is supplied as a single piece, it suits one-for-one replacement work rather than bulk maintenance. The one-year warranty applies to the product itself, but it does not replace the need to confirm compatibility with the vehicle or auxiliary electrical setup before purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number BT950-250 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type FUSE, Unit of Measure EACH, Warranty One Year, Amps 250A, Item Type Blade Fuse, Weight 0.015kg, Product Group 1 AUTO ELEC ACCESSORIES, Part No. BT950-250, Brand PROJECTA, Description Projecta Mega Fuse 250A 1 Pce.

Additional published details for cross-checking include Length 68mm, Fuse Type Mega, Pack Qty 1, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Projecta Mega Fuse 250A 1 Pce. Part number BT950-250 should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number BT950-250, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a fuse in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm fitment by checking the part number BT950-250, the 250A rating, the 68mm length, and the stated suitability for BT950-P1 against your existing fuse holder or application details before ordering.

FAQ

What is the part number for this fuse?

The listed part number is BT950-250. For this listing, part number BT950-250 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number BT950-250 is the main reference point. These details should still be checked against the original unit before ordering.

What amperage is this fuse?

It is rated at 250A. For this listing, part number BT950-250 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number BT950-250 is the main reference point. These details should still be checked against the original unit before ordering.

How many fuses are included?

This item is supplied as 1 piece, with a pack quantity of 1. For this listing, part number BT950-250 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number BT950-250 is the main reference point. These details should still be checked against the original unit before ordering.

What type of fuse is it?

It is listed as a Mega fuse and also described as a blade fuse. For this listing, part number BT950-250 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number BT950-250 is the main reference point. These details should still be checked against the original unit before ordering.

What is the length of the fuse?

The listed length is 68mm. For this listing, part number BT950-250 is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number BT950-250 is the main reference point. These details should still be checked against the original unit before ordering.

What should I check before buying?

Check that your application requires a 250A Mega fuse, that the holder accepts the 68mm size, and that the part number BT950-250 or the stated BT950-P1 suitability matches your existing setup. For this listing, part number BT950-250 is the main reference point. These details should still be checked against the original unit before ordering.