Sanden Air Conditioning Compressor 12V Ear Mount SD5H09 CXS5075

The Sanden SD5H09 air conditioning compressor is a 12V unit with ear mount mounting and a vertical O ring fitting type. It is listed under part number CXS5075 and also carries original equipment number 5075, which gives you a clear identifier when matching to an existing compressor or replacement requirement.

Key physical details include a 125mm clutch diameter, a 4 groove pulley section, and a gauge line measurement of 46.38mm. The unit weighs 5.6kg and is supplied as a single compressor, with oil capacity listed at 100ml and oil type SP20 noted for service reference.

This compressor is described as suitable for universal application, but the fit still needs to be checked against the mounting style, clutch size, pulley arrangement, and connection type on the vehicle. The specified O rings to suit ORX008 and ORX010 are also important when planning installation or replacement work.

Key Features

• 12V Sanden air conditioning compressor
• Ear mount compressor style
• SD5H09 series
• Part No. CXS5075
• Original equipment number 5075
• 125mm clutch diameter

Specifications

• Brand: Sanden
• Product type: Air conditioning compressor
• Unit of measure: Each
• Compressor mounting: Ear Mount
• Voltage: 12V
• Series: SD5H09
• Clutch diameter: 125mm
• Pulley section: 4 Groove

Fitment guidance

• Listed as suitable for universal application.
• Confirm the compressor mount, pulley section, clutch diameter, and connection style against the removed unit before ordering.
• Part number CXS5075 and original equipment number 5075 are the key reference points for matching.
• Check that the vehicle requires a 12V compressor with ear mount configuration and vertical O ring fittings.
• Use the replacement clutch reference CLX5075 only where it matches the application being repaired.

Application and Buying Notes

When comparing this compressor, start with the hard identifiers: part number CXS5075, original equipment number 5075, and the SD5H09 series. Those details are the safest way to confirm you are looking at the same compressor family before you get into mounting style, pulley count, or hose connection layout.

The ear mount design and vertical O ring fitting type must line up with the vehicle or the original unit. The 125mm clutch diameter and 4 groove pulley section are also important because the wrong clutch size or belt profile can prevent correct installation, even if the compressor otherwise looks similar.

The listed one year warranty applies to the product as supplied, but it does not replace the need to confirm application details. If you are matching from an existing compressor, compare the mounting ears, the clutch face, the pulley groove count, and the connection arrangement before placing the order.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXS5075 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty One Year, Compressor Mounting Ear Mount, Original Equipment Number 5075, Replacement Clutch CLX5075, Suits Unit Make Sanden, Note O Rings to suit ORX008 & ORX010 . Oil Type SP20, Oil Capacity 100ml, Weight 5.6kg.

Additional published details for cross-checking include Product Group 1 COOLING, Part No. CXS5075, Brand SANDEN, Description Sanden Air Conditioning Compressor 12V Ear Mount SD5H09, Clutch Diameter 125mm, Fitting Type Vertical O Ring, Pulley Section 4 Groove, Series SD5H09, Voltage 12, Gauge Line 46.38mm.

Sanden Air Conditioning Compressor 12V Ear Mount SD5H09. Part number CXS5075 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is 4 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXS5075, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Please confirm compatibility using part number CXS5075, original equipment number 5075, the SD5H09 series, and the listed mounting and connection details before purchase.

FAQ

What is the part number for this compressor?

The part number listed is CXS5075. For this listing, part number CXS5075 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What is the original equipment number?

The original equipment number listed is 5075. For this listing, part number CXS5075 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What voltage is this compressor?

It is a 12V compressor. For this listing, part number CXS5075 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What mounting style does it use?

It is listed as an ear mount compressor. For this listing, part number CXS5075 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

What pulley and clutch details are provided?

The compressor is listed with a 125mm clutch diameter and a 4 groove pulley section. For this listing, part number CXS5075 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.

Is fitment specified for a particular vehicle?

No vehicle model fitment is listed. It is described as suitable for universal application, so compatibility should be confirmed using the part number, mounting style, connection type, and pulley details. For this listing, part number CXS5075 is the main reference point. Listed voltage is 12. These details should still be checked against the original unit before ordering.