Sanden Air Conditioning Compressor 24V Ear Mount SD7H15 CXS8037

The Sanden air conditioning compressor listed here is a 24V unit in the SD7H15 series, with ear mount compressor mounting and a vertical O-ring fitting type. It is identified by part number CXS8037 and original equipment number 8037, which are the two best references to check when matching a replacement compressor to an existing system.

Key physical details include a 153mm clutch diameter, C pulley section, 39.55mm gauge line, and a weight of 7.7kg. The compressor is listed with a one year warranty and uses SP10 oil, with an oil capacity of 200ml.

This unit is described as a Sanden air conditioning compressor with universal application, but compressor replacement still needs careful checking against the existing mounting style, voltage, pulley setup, fitting type, and oil requirements. The supplied note also states that the clutch supplied may be fitted with a leaf spring armature, and that O-rings to suit ORX008 and ORX010 are required.

Key Features

• 24V Sanden air conditioning compressor
• SD7H15 series
• Ear mount compressor mounting
• Vertical O-ring fitting type
• 153mm clutch diameter
• C pulley section

Specifications

• Brand: Sanden
• Product type: Air conditioning compressor
• Part No.: CXS8037
• Original Equipment Number: 8037
• Series: SD7H15
• Voltage: 24V
• Compressor mounting: Ear mount
• Fitting type: Vertical O ring

Application and Buying Notes

Before ordering, compare the part number CXS8037 and the original equipment number 8037 with the compressor being replaced. Those identifiers are the most reliable starting point when checking a Sanden SD7H15 compressor, especially where the application is listed only as universal rather than tied to a specific vehicle model.

The mounting style matters just as much as the part number. This unit is an ear mount compressor with a vertical O-ring fitting type, so the physical layout needs to match the existing installation points and hose connection arrangement. The 24V electrical system requirement should also be checked against the vehicle or equipment fitted with the compressor.

Pulley and clutch details need attention during comparison. The compressor has a 153mm clutch diameter and a C pulley section, which should be checked against belt alignment and pulley compatibility on the existing system. The 39.55mm gauge line, 7.7kg weight, and JE head code are useful cross-checks when verifying whether the unit matches the original unit being replaced.

The lubrication note is important as well. This compressor uses SP10 oil and has an oil capacity of 200ml. The supplied note also says O-rings to suit ORX008 and ORX010 are required, and that the clutch supplied may be fitted with a leaf spring armature. These details should be confirmed before installation so the correct supporting parts are on hand.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXS8037 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty One Year, Compressor Mounting Ear Mount, Original Equipment Number 8037, Series SD7H15, Voltage 24, Gauge Line 39.55mm, Dust Cover Y/N No, Weight 7.7kg.

Additional published details for cross-checking include Product Group 1 COOLING, Part No. CXS8037, Brand SANDEN, Description Sanden Air Conditioning Compressor 24V Ear Mount SD7H15, Clutch Diameter 153mm, Fitting Type Vertical O Ring, Pulley Section C, Suits Unit Make Sanden, Note O Rings to suit ORX008 & ORX010 . Oil Type SP10 . Clutch supplied may be fitted with leaf spring armature., Oil Capacity 200ml.

Sanden Air Conditioning Compressor 24V Ear Mount SD7H15. Part number CXS8037 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is C. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXS8037, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment using the part number CXS8037, original equipment number 8037, and the matching application details, including 24V electrical requirement, ear mount construction, vertical O-ring fitting type, and pulley/clutch measurements.

FAQ

What is the part number for this compressor?

The listed part number is CXS8037. The original equipment number shown is 8037. For this listing, part number CXS8037 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What voltage does this compressor use?

It is a 24V compressor. For this listing, part number CXS8037 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What mounting style does it have?

It is an ear mount compressor. For this listing, part number CXS8037 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What fitting type is listed?

The fitting type is vertical O ring. For this listing, part number CXS8037 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What oil specification is noted?

The compressor uses SP10 oil and has an oil capacity of 200ml. For this listing, part number CXS8037 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

Are any additional parts noted with this compressor?

Yes. The note states that O-rings to suit ORX008 and ORX010 are required, and that the clutch supplied may be fitted with a leaf spring armature. For this listing, part number CXS8037 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.