Sanden Air Conditioning Compressor 24V Ear Mount SD7H15 Part No. CXSA909

The Sanden SD7H15 air conditioning compressor is a 24V unit with ear mount mounting and a vertical O-ring fitting type. It is listed under Part No. CXSA909 and Original Equipment Number A909, with a 146mm clutch diameter and B pulley section.

This compressor is supplied as a Sanden unit and is identified as universal application. It includes a dust cover, uses SP20 oil, and has an oil capacity of 135ml. The specified gauge line is 33.85mm.

For installers and buyers comparing replacement units, the key identifiers here are the SD7H15 series, 24V voltage, ear mount design, JE head code, and the replacement clutch reference CLX8034. Those details are the main checks before ordering or fitting.

Key Features

• 24V Sanden air conditioning compressor
• SD7H15 series
• Ear mount compressor mounting
• Vertical O-ring fitting type
• Universal application listed
• Dust cover included

Specifications

• Brand: Sanden
• Product type: Air conditioning compressor
• Voltage: 24V
• Compressor mounting: Ear mount
• Series: SD7H15
• Part No.: CXSA909
• Original Equipment Number: A909
• Clutch diameter: 146mm

Fitment and application checks

• Universal application is listed
• Confirm the compressor mounting style is ear mount
• Confirm the vehicle or system is 24V
• Check the part number CXSA909 against your existing unit
• Check Original Equipment Number A909 where applicable
• Confirm the vertical O-ring fitting type and seal sizes ORX008 and ORX010
• Confirm the replacement clutch reference CLX8034 if clutch matching is required

Application and Buying Notes

Before ordering, compare the existing compressor details with Part No. CXSA909, the SD7H15 series, and the listed 24V rating. Those identifiers are the safest way to narrow the match, especially when the unit is being replaced rather than installed from new.

The mounting and connection details matter just as much as the electrical rating. This compressor is an ear mount unit with a vertical O-ring fitting type, a 146mm clutch diameter, and a B pulley section, so those points should be checked against the vehicle or the removed compressor before purchase.

The oil and seal information also needs attention. The listed oil type is SP20 with an oil capacity of 135ml, and the note specifies O-rings to suit ORX008 and ORX010. If any of those details differ from the system already in the vehicle, the part should be checked carefully before installation.

If you are matching a replacement clutch, the reference provided is CLX8034. Where the original compressor has been removed, it is worth confirming the head code JE Head, the gauge line of 33.85mm, and the dust cover feature so the replacement specification aligns with the application already in place.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number CXSA909 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING COMPRESSOR, Unit of Measure EACH, Warranty One Year, Compressor Mounting Ear Mount, Original Equipment Number A909, Replacement Clutch CLX8034, Suits Unit Make Sanden, Note O Rings to suit ORX008 & ORX010 . Oil Type SP20, Oil Capacity 135ml, Head Code JE Head.

Additional published details for cross-checking include Product Group 2 AC COMPONENTS, Part No. CXSA909, Brand SANDEN, Description Sanden Air Conditioning Compressor 24V Ear Mount SD7H15, Clutch Diameter 146mm, Fitting Type Vertical O Ring, Pulley Section B, Series SD7H15, Voltage 24.

Sanden Air Conditioning Compressor 24V Ear Mount SD7H15. Part number CXSA909 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Pulley configuration is B. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number CXSA909, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning compressor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Please confirm fitment by checking Part No. CXSA909, Original Equipment Number A909, the 24V rating, ear mount configuration, and the vertical O-ring connection details before ordering.

FAQ

What is the part number for this compressor?

The listed part number is CXSA909. For this listing, part number CXSA909 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What voltage is this Sanden compressor?

It is a 24V compressor. For this listing, part number CXSA909 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What mounting style does it use?

It is listed as an ear mount compressor. For this listing, part number CXSA909 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What is the compressor series?

The series is SD7H15. For this listing, part number CXSA909 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

What oil information is provided?

The listed oil type is SP20 and the oil capacity is 135ml. For this listing, part number CXSA909 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.

Is a fitment list provided?

No fitment makes or sample applications are provided. The listing states universal application, so the part number and mounting details should be checked against the existing unit before ordering. For this listing, part number CXSA909 is the main reference point. Listed voltage is 24. These details should still be checked against the original unit before ordering.