Red Dot Air Conditioning Hose Fitting Copper Fior Barb # 8 90 Degree RD104260P

This Red Dot air conditioning hose fitting is a copper FIOR-barb connector in size #8 with a 90 degree hose angle. The listed part number is RD104260P, and it is supplied as a single unit for applications that call for a female O-ring seat and clamp-style crimping.

It is described as suitable for RedDot applications and carries a reference number of 70R7650. The fitting uses a #8 size, female O-ring seat type, and a barb style hose connection, which makes the exact hose end details important when checking against your existing hose assembly.

The fitting is made from copper and has no access port. It is listed under cooling and AC hose & fittings, with a stated hose angle of 90 degrees and a fitting size of #8. The warranty listed is one year, which may matter if you are matching replacement parts for an existing RedDot setup.

Key Features

• RedDot air conditioning hose fitting
• Copper construction
• FIOR-barb fitting type
• #8 fitting size
• 90 degree hose angle
• Female O-ring seat

Specifications

• Brand: REDDOT
• Part No.: RD104260P
• Product type: Heater hose connector
• Unit of measure: Each
• Metal type: Copper
• Fitting type: FIOR - Barb
• Fitting size: #8
• Hose angle: 90 degrees

Application and Buying Notes

Before ordering, check that your hose assembly calls for a #8 fitting with a female O-ring seat and a 90 degree outlet. Those three details are the key identifiers here, along with the part number RD104260P and the reference number 70R7650, which help when cross-checking against the existing hose end or replacement notes.

This fitting is listed as FIOR-barb with clamp crimp type, so it is intended for hose assemblies that are built to suit that style of connection. If your current hose uses a different seat type, a different barb size, or a different hose angle, this part will not be a direct match even if it is from the same general RedDot range.

As with any hose fitting, the safest approach is to compare the part number, the fitting style, and the physical dimensions of the removed part before fitting. The warranty is one year, but that does not replace the need to confirm the assembly details first, especially on climate control hoses where the angle and seat type must match cleanly.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number RD104260P helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type HEATER HOSE CONNECTOR, Unit of Measure EACH, Warranty One Year, Fitting Size # 8, Hose Angle (Degrees) 90, Seat Type Female Oring, Weight .059kg, Product Group 1 COOLING, Part No. RD104260P, Brand REDDOT.

Additional published details for cross-checking include Description Red Dot Air Conditioning Hose Fitting Copper FIOR - Barb # 8 - 90 Degree, Access Port Type None, Fitting Type FIOR - Barb, Metal Type Copper, Crimp Type Clamp, Product Group 2 AC HOSE & FITTINGS.

Red Dot Air Conditioning Hose Fitting Copper FIOR - Barb # 8 - 90 Degree. Part number RD104260P should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number RD104260P, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a heater hose connector in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm fitment by matching part number RD104260P, the #8 size, 90 degree angle, female O-ring seat, and FIOR-barb hose configuration against the original part or application details before ordering.

FAQ

What is the part number for this fitting?

The listed part number is RD104260P. For this listing, part number RD104260P is the main reference point. These details should still be checked against the original unit before ordering.

What size is the fitting?

The fitting size is #8. For this listing, part number RD104260P is the main reference point. These details should still be checked against the original unit before ordering.

What angle is the hose connection?

The hose angle is 90 degrees. For this listing, part number RD104260P is the main reference point. These details should still be checked against the original unit before ordering.

What type of seat does it use?

It uses a female O-ring seat. For this listing, part number RD104260P is the main reference point. These details should still be checked against the original unit before ordering.

What material is the fitting made from?

The fitting is made from copper. For this listing, part number RD104260P is the main reference point. These details should still be checked against the original unit before ordering.

Is fitment information provided for specific vehicles?

No vehicle fitment list is provided here. The safest check is to match RD104260P, #8 size, 90 degree angle, female O-ring seat, and FIOR-barb configuration to your existing part or application details. For this listing, part number RD104260P is the main reference point. These details should still be checked against the original unit before ordering.