Red Dot Air Conditioning Blower Wheel RD556010P 146MM CCW Single Entry

The Red Dot Air Conditioning Blower Wheel is a plastic blower wheel supplied as part number RD556010P and identified with Ref No. 73R6370. It is listed as a single entry blade type with CCW rotation, a 146mm outside diameter, and an 8mm shaft diameter, so the physical dimensions and rotation direction are the first checks before purchase.

This blower wheel is described r conditioning blower wheel and is also grouped under heating and cooling. It is sold as each, weighs .26kg, and carries a one year warranty. Those details matter when matching the wheel to an existing assembly, because shaft size, wheel diameter, entry style, and rotation must all align with the application.

The body material is plastic and the width is 76mm, which gives a useful cross-check when comparing against a removed component. If you are replacing a worn or damaged wheel, the part number RD556010P and Ref No. 73R6370 are the strongest identifiers to verify before ordering.

Because no vehicle fitment data was supplied, this listing should be matched by measurements and application details rather than model assumption. Confirm the wheel diameter, shaft diameter, entry style, and CCW rotation against the original unit or system requirements before fitting.

Key Features

• Red Dot blower wheel
• Part number RD556010P
• Ref No. 73R6370
• Single entry blade type
• CCW rotation
• Plastic construction

Specifications

• Type: Air conditioning blower wheel
• Item type: Blower wheel
• Brand: Red Dot
• Part No.: RD556010P
• Reference number: 73R6370
• Rotation: CCW
• Blade type: Single entry
• Entry: Single

Application and Buying Notes

The most reliable way to match this blower wheel is by checking the part number RD556010P and the reference number 73R6370 against the existing component. If those identifiers are not visible on the removed wheel, compare the measured dimensions instead: 146mm outside diameter, 76mm width, and an 8mm shaft diameter are the key figures supplied here.

At .26kg, this is a relatively light component, but weight alone is not a fitment guide. The safer approach is to treat the part number, reference number, shaft diameter, wheel diameter, width, rotation, and entry type as the full set of checkpoints before ordering or removing the old unit.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number RD556010P helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING BLOWER WHEEL, Unit of Measure EACH, Warranty One Year, Rotation CCW, Width 76mm, Item Type Blower Wheel, Entry Single, Product Group 2 HEATING, Part No. RD556010P.

Additional published details for cross-checking include Brand REDDOT, Description Red Dot Air Conditioning Blower Wheel, Outside Diameter 146mm, Shaft Diameter 8mm, Blade Type Single Entry, Body Material Plastic, Weight .26kg, Product Group 1 COOLING.

Red Dot Air Conditioning Blower Wheel. Part number RD556010P should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number RD556010P, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning blower wheel in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm compatibility by matching part number RD556010P, Ref No. 73R6370, 146mm outside diameter, 8mm shaft diameter, 76mm width, single entry blade type, and CCW rotation against the original blower wheel or system requirements before purchase.

FAQ

What is the part number for this blower wheel?

The part number is RD556010P. For this listing, part number RD556010P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD556010P is the main reference point. These details should still be checked against the original unit before ordering.

What is the reference number listed for this item?

The reference number supplied is 73R6370. For this listing, part number RD556010P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD556010P is the main reference point. These details should still be checked against the original unit before ordering.

What is the rotation direction?

It is listed as CCW, which means counter-clockwise rotation. For this listing, part number RD556010P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD556010P is the main reference point. These details should still be checked against the original unit before ordering.

What are the main measurements?

The blower wheel has a 146mm outside diameter, 76mm width, and an 8mm shaft diameter. For this listing, part number RD556010P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD556010P is the main reference point. These details should still be checked against the original unit before ordering.

What type of blade design does it use?

It is a single entry blade type, and the entry is listed as single. For this listing, part number RD556010P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD556010P is the main reference point. These details should still be checked against the original unit before ordering.

Does this item include a warranty?

Yes, it is listed with a one year warranty. For this listing, part number RD556010P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD556010P is the main reference point. These details should still be checked against the original unit before ordering.