Red Dot Air Conditioning Blower Wheel RD580920P 120MM 8MM CW

The Red Dot Air Conditioning Blower Wheel, part number RD580920P, is a plastic double-entry blower wheel used in heating and cooling applications. It is listed with an outside diameter of 120mm, a width of 95mm, and an 8mm shaft diameter, so those dimensions should be checked carefully against the existing unit before ordering.

The unit is supplied as each and carries a one-year warranty. With a weight of 0.313kg, it is a lightweight plastic component, but the key compatibility points remain the shaft size, wheel diameter, width, rotation direction, and the double-entry blade design.

Key Features

• Red Dot blower wheel for air conditioning and heating systems
• Part number RD580920P
• Ref No. 73R7200
• Double-entry blade type
• Clockwise rotation (CW)
• Plastic body construction

Specifications

• Outside diameter: 120mm
• Width: 95mm
• Shaft diameter: 8mm
• Blade type: Double entry
• Rotation: CW
• Body material: Plastic
• Weight: 0.313kg
• Warranty: One year

Application and Buying Notes

Before buying, confirm the old blower wheel matches RD580920P in the details that matter most: 120mm outside diameter, 95mm width, 8mm shaft diameter, double-entry blade type, and clockwise rotation. A blower wheel can look similar to another part while still being different in shaft size or rotation, so measured comparison is the safest way to avoid a mismatch.

The listed part identifier is RD580920P, with Ref No. 73R7200. If you are replacing a damaged or missing wheel, compare any markings on the old component, then measure the shaft and wheel body rather than relying on appearance alone. The plastic construction and 0.313kg weight are also useful reference points when comparing against the removed part.

This item sits in the heating and cooling product groups and is described as a Red Dot air conditioning blower wheel. That tells you the general component type, but it does not remove the need to check the application in your system. The wheel must suit the housing, shaft, and rotation arrangement already in the vehicle or equipment.

If your original fan wheel has been worn, cracked, or distorted, matching dimensions becomes even more important because damage can make the old part hard to identify by eye. Use the shaft diameter, outside diameter, width, and rotation direction together, then confirm the part number RD580920P where possible before placing the order.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number RD580920P helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING BLOWER WHEEL, Unit of Measure EACH, Warranty One Year, Rotation CW, Width 95mm, Item Type Blower Wheel, Entry Double, Product Group 2 HEATING, Part No. RD580920P.

Additional published details for cross-checking include Brand REDDOT, Description Red Dot Air Conditioning Blower Wheel, Outside Diameter 120mm, Shaft Diameter 8mm, Blade Type Double Entry, Body Material Plastic, Weight .313kg, Product Group 1 COOLING.

Red Dot Air Conditioning Blower Wheel. Part number RD580920P should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number RD580920P, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning blower wheel in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm fitment with part number RD580920P, Ref No. 73R7200, and the measured dimensions of your existing blower wheel. Check 120mm outside diameter, 95mm width, 8mm shaft diameter, double-entry blade type, and CW rotation before purchasing.

FAQ

What is the part number for this blower wheel?

The listed part number is RD580920P. For this listing, part number RD580920P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD580920P is the main reference point. These details should still be checked against the original unit before ordering.

What is the reference number?

The reference number provided is 73R7200. For this listing, part number RD580920P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD580920P is the main reference point. These details should still be checked against the original unit before ordering.

What are the main dimensions?

The blower wheel has a 120mm outside diameter, 95mm width, and an 8mm shaft diameter. For this listing, part number RD580920P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD580920P is the main reference point. These details should still be checked against the original unit before ordering.

What type of blade design does it use?

It is a double-entry blower wheel. For this listing, part number RD580920P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD580920P is the main reference point. These details should still be checked against the original unit before ordering.

Which direction does it rotate?

The listed rotation is clockwise (CW). For this listing, part number RD580920P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD580920P is the main reference point. These details should still be checked against the original unit before ordering.

What warranty is supplied with it?

It carries a one-year warranty. For this listing, part number RD580920P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD580920P is the main reference point. These details should still be checked against the original unit before ordering.