OEX Alternator 12V 95A Autolite Style AXA950

The OEX AXA950 is a new 12V alternator rated at 95 amps and built in an Autolite style. It uses an internal regulator, clockwise rotation, and a 6 groove pulley section, so the physical layout and charging setup need to match the vehicle before purchase.

This unit is listed with a single leg alternator mount, 154mm mount centre to centre, 76mm mount leg thickness, an 11mm pivot hole diameter, and an M8x1.25 adjusting hole. Those dimensions are the key checks when comparing it against the original alternator.

A clear application note also applies: analogue dash only, with an adaptor to suit HXK-28. That makes the part number AXA950 and the installed hardware details especially important when confirming suitability for a specific vehicle.

OEX states the brand is sourced from market leading original equipment manufacturers and aftermarket suppliers, with products sourced from ISO9001 certified factories. The unit is backed by a 3 year passenger / 1 year commercial warranty, and it weighs 5.48kg.

Key Features

• New 12V alternator
• 95 amp output
• Autolite style unit
• Internal regulator
• Clockwise rotation
• 6 groove pulley section

Specifications

• Voltage: 12V
• Power rating: 95A
• Part number: AXA950
• Regulator type: Internal
• Rotation: CW
• Pulley outside diameter: 56mm
• Pulley section: 6 groove
• Alternator mount: Single leg

Confirmed fitment guidance

• Ford Fairlane applications are listed in the provided fitment data, including 1991 through 1999.
• Ford Fairmont applications are listed in the provided fitment data, including 1991 onwards in the preview supplied.
• Ford Falcon and Ford LTD are included in the fitment make list provided.
• Fitment should still be checked against the original alternator, pulley alignment, mount style, and the analogue dash / HXK-28 adaptor note before ordering.

Application and Buying Notes

Before buying, compare the original alternator against the AXA950 mounting details: single leg mount, 154mm centre to centre, 76mm mount leg thickness, 11mm pivot hole, and M8x1.25 adjusting hole. These are the sort of measurements that determine whether the unit will physically bolt up without modification.

The pulley and charging configuration also matter. This alternator has a 56mm outside diameter pulley, 6 groove pulley section, clockwise rotation, and an internal regulator, so the vehicle’s belt layout and electrical system need to match those details.

The note 'Analogue dash only' is important. If the vehicle is not set up for analogue dash use, or if the adaptor requirement to suit HXK-28 is not accounted for, the alternator may not be the right choice even if some other dimensions appear close.

For buyers comparing part numbers, AXA950 is the key identifier here. Matching the part number, the Autolite style description, and the application note is the most reliable way to reduce the risk of ordering the wrong unit. When a vehicle has been modified, or the existing alternator has been changed previously, confirm the fit against the actual installed part rather than the registration alone.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number AXA950 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Leg Thickness 76mm, Pivot Hole Diameter 11, Pulley Outside Diameter 56mm, Regulator Type Internal, Suits Unit Make Autolite, Note Analogue dash only. Adaptor to suit HXK-28, Mount Cnt to Cnt 154mm.

Additional published details for cross-checking include Number of grooves 6, Product Group 2 ALTERNATORS, Part No. AXA950, Brand OEX, Description OEX Alternator 12V 95A Autolite Style, Adjusting Hole Diameter M8x1.25, Pin Code IR21, Power Rating (Amp) 95, Pulley Section 6 Groove.

OEX Alternator 12V 95A Autolite Style. Part number AXA950 should be checked first. Listed voltage is 12. Listed output rating is 95. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Single Leg. Regulator type is Internal. Pulley configuration is 6 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number AXA950, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 95 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include FORD FAIRLANE, FORD FAIRLANE 1991, FORD FAIRLANE 1992, FORD FAIRLANE 1993. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is 3yr Passenger 1yr Commercial. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment with part number AXA950, the Autolite style description, the mounting dimensions, pulley specification, and the analogue dash / HXK-28 adaptor requirement before ordering.

FAQ

Is this alternator new or remanufactured?

This unit is listed as new.

What is the voltage and output rating?

It is a 12V alternator rated at 95A.

What regulator type does it use?

It uses an internal regulator.

What pulley setup does it have?

It has a 6 groove pulley section and a 56mm pulley outside diameter.

What is the main fitment warning?

The note states analogue dash only, and an adaptor to suit HXK-28 is specified.

Which part number should I use when checking compatibility?

The part number is AXA950, and that should be matched with the mounting and application details before purchase.