OEX Alternator 12V 60A Denso Style DXA508

The OEX Alternator DXA508 is a new 12V, 60A unit built in a Denso style layout and listed with a twin leg alternator mount. It suits a Denso unit make and uses an internal regulator, which are key checks when matching an alternator for replacement work.

This alternator is listed with a pulley outside diameter of 75mm, a B section pulley, a 15mm shaft dimension, and a 155mm mount centre-to-centre measurement. The inside mounting legs measure 66mm, the pivot hole diameter is 8mm, and the adjusting hole is M8 x 1.25, so the physical mounting points should be checked carefully against the original unit before purchase.

OEX positions this part as a new rotating electrical component under part number DXA508. It is supported by a 3 year passenger / 1 year commercial warranty, and the brand notes supplied with the product state that OEX sources from established OEM and aftermarket suppliers and uses ISO9001 certified factories for engineering, testing, and quality control procedures.

Key Features

• 12V alternator with 60A output
• New unit, not remanufactured
• Denso style alternator for Denso applications
• Internal regulator
• Twin leg alternator mount
• B section pulley

Specifications

• Brand: OEX
• Part No.: DXA508
• Type: Alternator
• Voltage: 12V
• Power Rating: 60A
• Suits Unit Make: Denso
• Alternator Mount: Twin Leg
• Regulator Type: Internal

Verified application details

• Toyota Industrial 02-7FD35
• Toyota Industrial 3FG25
• Toyota Industrial FG25
• Toyota Industrial Forklift

Application and Buying Notes

When replacing an alternator, the part number DXA508, the Denso style housing, and the mount details are the first things to confirm. This unit is a 12V, 60A alternator with an internal regulator, so it should only be considered where those electrical and mounting details line up with the original part.

The physical measurements matter just as much as the electrical rating. Check the 66mm inside mounting legs, 155mm mount centre-to-centre measurement, 8mm pivot hole diameter, and M8 x 1.25 adjusting hole against the removed alternator. The 75mm pulley outside diameter and B section pulley should also be matched to the belt system already in the vehicle or equipment.

This alternator is listed for Toyota Industrial applications including 02-7FD35, 3FG25, FG25, and Forklift references. Even where the application family appears similar, alternators can differ by bracket, pulley, regulator layout, or shaft details, so matching the original unit remains the safest way to order.

Because this is a 3.7kg new unit, it is suitable where a direct replacement alternator of the same style and output is required. If the old alternator has been changed before, compare the housing shape, mounting ears, connector arrangement, and pulley type to the current fitted part rather than relying on the machine model alone.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXA508 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 66mm, Pivot Hole Diameter 8, Pulley Outside Diameter 75mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 155mm, Shaft Dimension 15.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. DXA508, Brand OEX, Description OEX Alternator 12V 60A Denso Style, Adjusting Hole Diameter M8 x 1.25, Pin Code IR7, Power Rating (Amp) 60, Pulley Section B, Suits Unit Make Denso.

OEX Alternator 12V 60A Denso Style. Part number DXA508 should be checked first. Listed voltage is 12. Listed output rating is 60. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is B. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number DXA508, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 60 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm fitment by checking part number DXA508, Denso style construction, 12V 60A output, internal regulator, and the listed mounting and pulley dimensions against the original alternator before ordering.

FAQ

What is the part number for this alternator?

The listed part number is DXA508. For this listing, part number DXA508 is the main reference point. Listed voltage is 12. Listed output rating is 60. Published fitment references include TOYOTA INDUSTRIAL 02-7FD35, TOYOTA INDUSTRIAL 02-7FD35 2005, TOYOTA INDUSTRIAL 3FG25. These details should still be checked against the original unit before ordering.

What voltage and output does it have?

It is a 12V alternator with a 60A power rating. For this listing, part number DXA508 is the main reference point. Listed voltage is 12. Listed output rating is 60. Published fitment references include TOYOTA INDUSTRIAL 02-7FD35, TOYOTA INDUSTRIAL 02-7FD35 2005, TOYOTA INDUSTRIAL 3FG25. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

This alternator is listed as new. For this listing, part number DXA508 is the main reference point. Listed voltage is 12. Listed output rating is 60. Published fitment references include TOYOTA INDUSTRIAL 02-7FD35, TOYOTA INDUSTRIAL 02-7FD35 2005, TOYOTA INDUSTRIAL 3FG25. These details should still be checked against the original unit before ordering.

What regulator type does it use?

It has an internal regulator. For this listing, part number DXA508 is the main reference point. Listed voltage is 12. Listed output rating is 60. Published fitment references include TOYOTA INDUSTRIAL 02-7FD35, TOYOTA INDUSTRIAL 02-7FD35 2005, TOYOTA INDUSTRIAL 3FG25. These details should still be checked against the original unit before ordering.

Which applications are listed for fitment?

The listed applications are Toyota Industrial 02-7FD35, 3FG25, FG25, and Forklift references. For this listing, part number DXA508 is the main reference point. Listed voltage is 12. Listed output rating is 60. Published fitment references include TOYOTA INDUSTRIAL 02-7FD35, TOYOTA INDUSTRIAL 02-7FD35 2005, TOYOTA INDUSTRIAL 3FG25. These details should still be checked against the original unit before ordering.

What measurements should I check before ordering?

Check the 66mm inside mounting legs, 155mm mount centre-to-centre, 8mm pivot hole diameter, M8 x 1.25 adjusting hole, 75mm pulley outside diameter, and B section pulley against the original unit. For this listing, part number DXA508 is the main reference point. Listed voltage is 12. Listed output rating is 60. Published fitment references include TOYOTA INDUSTRIAL 02-7FD35, TOYOTA INDUSTRIAL 02-7FD35 2005, TOYOTA INDUSTRIAL 3FG25. These details should still be checked against the original unit before ordering.