OEX Starter Motor 12V 9 Tooth CW Denso Style DXS436

The OEX Starter Motor DXS436 is a new 12V starter motor with a 2kW power rating, 9 teeth, and clockwise rotation. It is listed as a Denso style unit with a 2-hole starter mount type, which makes the physical matching points important when comparing it to the vehicle’s original starter.

Key dimensions for checking fit include a 120mm mount centres measurement, 95mm flange diameter, 13mm mount hole diameter, 230mm overall length, 32mm pinion diameter, and 21mm pinion at rest. Those figures give a practical way to compare the replacement against the existing starter before ordering.

This starter motor is supplied as a new unit and is covered by a 3yr passenger / 1yr commercial warranty. The listed weight is 5.16kg, and the unit is described as suitable for Denso applications, so confirming the unit make, tooth count, rotation, and mounting pattern remains the safest approach.

Key Features

• 12V starter motor
• 2kW power rating
• 9-tooth pinion
• Clockwise rotation
• Denso style unit
• New starter motor

Specifications

• Brand: OEX
• Part No.: DXS436
• Product type: Starter Motor
• Voltage: 12V
• Power rating: 2kW
• Rotation: CW
• Number of teeth: 9
• Suits unit make: Denso

Fitment guidance

• Confirm the original starter matches 12V, 9 teeth, and clockwise rotation.
• Check the mounting arrangement against the 2-hole starter mount type.
• Compare the 120mm mount centres, 95mm flange diameter, and 13mm mount hole diameter.
• Check the overall length of 230mm and the 32mm pinion diameter against the unit being replaced.

Application and Buying Notes

When replacing a starter motor, the most useful checks are the electrical rating, pinion details, and mounting points. This unit is 12V, 2kW, 9-tooth, and clockwise rotation, so those figures should line up with the original starter before you commit to purchase.

The physical dimensions matter just as much as the electrical specification. With 120mm mount centres, a 95mm flange diameter, 13mm mount hole diameter, and a 230mm overall length, this OEX starter should be compared carefully against the removed unit rather than assumed to fit from appearance alone.

The listing shows a Denso style starter with a 2-hole mount and a dry clutch arrangement. If the vehicle or machine uses a different unit make, tooth count, rotation, or mounting pattern, it is better to verify by part number and measurements first, especially on equipment where similar-looking starters can be different.

The part number is DXS436 and the unit weight is 5.16kg. Those identifiers are useful when checking an old label, cross-referencing a catalogue entry, or matching against an existing starter that has been removed from the machine.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS436 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 120mm, Number of Teeth 9, Pinion at Rest 21mm, Power Rating 2kW, Suits Unit Make Denso, New / Reman. New, Wet / Dry Clutch Dry.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. DXS436, Brand OEX, Description OEX Starter Motor 12V 9Th CW Denso Style, Flange Diameter 95mm, Mount Hole Diameter 13, Overall Length 230mm, Pinion Diameter 32mm, Rotation CW.

OEX Starter Motor 12V 9Th CW Denso Style. Part number DXS436 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS436, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include CASE CX75C, CASE CX75C 2015, CASE CX75SR, CASE CX80, HITACHI EX27U, HITACHI EX35U. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm compatibility by matching the part number DXS436, the Denso style application, and the listed dimensions and rotation against the original starter motor before ordering.

FAQ

What is the voltage and power rating of this starter motor?

It is a 12V starter motor with a 2kW power rating. For this listing, part number DXS436 is the main reference point. Listed voltage is 12. Published fitment references include CASE CX75C, CASE CX75C 2015, CASE CX75SR. These details should still be checked against the original unit before ordering.

What type of rotation does it use?

The starter is clockwise rotation, listed as CW. For this listing, part number DXS436 is the main reference point. Listed voltage is 12. Published fitment references include CASE CX75C, CASE CX75C 2015, CASE CX75SR. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

It has 9 teeth. For this listing, part number DXS436 is the main reference point. Listed voltage is 12. Published fitment references include CASE CX75C, CASE CX75C 2015, CASE CX75SR. These details should still be checked against the original unit before ordering.

What part number should I use to check compatibility?

The part number is DXS436. For this listing, part number DXS436 is the main reference point. Listed voltage is 12. Published fitment references include CASE CX75C, CASE CX75C 2015, CASE CX75SR. These details should still be checked against the original unit before ordering.

What mounting details are listed?

The listing shows a 2-hole starter mount type, 120mm mount centres, a 95mm flange diameter, and 13mm mount hole diameter. For this listing, part number DXS436 is the main reference point. Listed voltage is 12. Published fitment references include CASE CX75C, CASE CX75C 2015, CASE CX75SR. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured starter motor?

It is listed as new. For this listing, part number DXS436 is the main reference point. Listed voltage is 12. Published fitment references include CASE CX75C, CASE CX75C 2015, CASE CX75SR. These details should still be checked against the original unit before ordering.