OEX Starter Motor 12V 11TH CW Delco Style DXS500

The OEX Starter Motor DXS500 is a new 12V starter motor in Delco style with 11 teeth, clockwise rotation, and a 1.7kW power rating. It is listed with a pad starter mount type, 83mm mount centres, a 68mm flange diameter, and a 230mm overall length.

This unit suits Delco applications and is noted as a PG260 series inline mount. The starter has a 47mm nose cone length, 10mm mount hole diameter, 29mm pinion diameter, and 4mm pinion at rest, so matching the physical dimensions is an important part of checking suitability before purchase.

OEX states its products are sourced from market leading original equipment manufacturers and aftermarket suppliers, made in ISO certified factories, and backed by a comprehensive nationwide warranty. The listed warranty for this starter motor is 3 years for passenger use and 1 year for commercial use.

Key Features

• 12V starter motor
• 11-tooth pinion
• Clockwise rotation
• Delco style / suits Delco units
• New unit, not remanufactured
• Pad starter mount type

Specifications

• Part number: DXS500
• Brand: OEX
• Type: Starter motor
• Power rating: 1.7kW
• Voltage: 12V
• Rotation: CW
• Number of teeth: 11
• Suits unit make: Delco

Verified fitment guidance

• Fitment is supported for Delco applications using the PG260 series inline mount.
• This starter is stated to replace 10MT.
• It is noted as an option suited to stock engines.
• For modified engines, the listed alternative is HXS075.
• The listing states it is not marine certified.

Application and Buying Notes

Before ordering, confirm the part number DXS500 and compare the starter’s key dimensions: 83mm mount centres, 68mm flange diameter, 47mm nose cone length, 230mm overall length, and 10mm mount hole diameter. These measurements are often just as important as the voltage when matching a starter to the vehicle.

The starter is a 12V unit with clockwise rotation, 11 teeth, and a 1.7kW power rating. Those details need to align with the existing application, especially where the vehicle still uses the original Delco setup or a PG260 series inline mount.

The notes state this starter may need to be shimmed with KSX12000, which means installation clearance should be checked carefully rather than assumed. The same notes also say the offered option suits stock engines, while modified engines should use HXS075 instead.

Because the unit is not marine certified, it should only be selected for suitable automotive or vehicle applications. If the vehicle has been converted, modified, or previously fitted with a non-standard starter, the safest approach is to compare the old unit, the mounting pattern, the pinion specification, and the Delco application details before placing the order.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS500 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 83mm, Nose Cone Length 47mm, Overall Length 230mm, Pinion Diameter 29mm, Rotation CW, Voltage 12, New / Reman. New.

Additional published details for cross-checking include Wet / Dry Clutch Dry, Product Group 2 STARTER MOTORS, Part No. DXS500, Brand OEX, Description OEX Starter Motor 12V 11Th CW Delco Style, Flange Diameter 68mm, Mount Hole Diameter 10, Number of Teeth 11, Pinion at Rest 4mm.

OEX Starter Motor 12V 11Th CW Delco Style. Part number DXS500 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS500, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include CHEVROLET CAMARO, CHEVROLET CAMARO 1966, CHEVROLET CAMARO 1967, CHEVROLET CAMARO 1968, HOLDEN H SERIES, HOLDEN H SERIES 1971. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm compatibility by matching part number DXS500, Delco application details, PG260 series inline mount, and the physical measurements listed above. Do not rely on appearance alone, and check shimming requirements where needed.

FAQ

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number DXS500 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET CAMARO, CHEVROLET CAMARO 1966, CHEVROLET CAMARO 1967. These details should still be checked against the original unit before ordering.

What is the part number?

The listed part number is DXS500. For this listing, part number DXS500 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET CAMARO, CHEVROLET CAMARO 1966, CHEVROLET CAMARO 1967. These details should still be checked against the original unit before ordering.

What rotation does it have?

The starter motor is clockwise (CW) rotation. For this listing, part number DXS500 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET CAMARO, CHEVROLET CAMARO 1966, CHEVROLET CAMARO 1967. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

It has 11 teeth. For this listing, part number DXS500 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET CAMARO, CHEVROLET CAMARO 1966, CHEVROLET CAMARO 1967. These details should still be checked against the original unit before ordering.

Is it new or remanufactured?

It is listed as new. For this listing, part number DXS500 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET CAMARO, CHEVROLET CAMARO 1966, CHEVROLET CAMARO 1967. These details should still be checked against the original unit before ordering.

What warranty is listed?

The listed warranty is 3 years for passenger use and 1 year for commercial use. For this listing, part number DXS500 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET CAMARO, CHEVROLET CAMARO 1966, CHEVROLET CAMARO 1967. These details should still be checked against the original unit before ordering.