OEX Starter Motor 12V 10T CW Delco Style DXS535

The OEX Starter Motor DXS535 is a 12V, clockwise rotating starter motor with a 10 tooth pinion, built in a Delco style and intended for applications that suit a pad mount starter. Key dimensions include a 74mm mount centres A measurement, 58mm flange diameter, and 226mm overall length, so it is important to compare the physical layout with the unit being replaced before ordering.

This starter motor is listed as new, with a 1.2kW power rating, 28mm pinion diameter, 11mm pinion at rest, and 10mm mount hole diameter. It weighs 3.72kg and is supplied as a single each unit. For buyers matching by part number, the identifier is DXS535.

OEX notes that its products are sourced from market leading original equipment manufacturers and aftermarket suppliers, and from ISO certified factories. The starter motor is backed by a 3 year passenger warranty and 1 year commercial warranty, which gives a clear service expectation for private and business use where the application is confirmed correctly.

Key Features

• 12V starter motor with clockwise rotation
• 10 tooth pinion
• Delco style unit
• Pad mount starter type
• New unit, not remanufactured
• 1.2kW power rating

Specifications

• Voltage: 12V
• Rotation: CW
• Number of teeth: 10
• Power rating: 1.2kW
• Starter mount type: Pad
• Suits unit make: Delco
• Mount centres A: 74mm
• Flange diameter: 58mm

Fitment guidance

• Fitment data includes Holden and HSV applications.
• Listed makes include Holden Adventra, Calais, Caprice, Commodore, Crewman, Monaro, One Tonner and Statesman.
• Listed makes also include HSV Avalanche, Caprice, ClubSport, Coupe 4, Grange, GTO, GTS, Maloo, Manta, Senator, Statesman, SV99 and XU8.
• Some applications shown in the fitment data include Holden Adventra 2003 to 2007 and Holden Calais 1999 to 2003.
• Some HSV applications shown include Avalanche 2003 to 2006, Caprice 1994 to 1996 and ClubSport 1999 to 2000.

Application and Buying Notes

Before buying, check the part number DXS535, the 12V electrical specification, and the clockwise rotation against the starter you are replacing. The physical dimensions matter as well, especially the 74mm mount centres A, 58mm flange diameter, 226mm overall length, and 10mm mount hole diameter, because a Delco style starter can still vary in mounting and engagement details.

The 10 tooth pinion and 28mm pinion diameter are important checks when confirming mesh and engagement with the existing setup. The starter is specified as a pad mount unit for Delco applications, so make sure the mounting style on the vehicle matches before fitting. If the old unit is damaged or unreadable, comparing the removed starter against these dimensions is the safest approach.

For buyers using a fitment reference, the listed applications cover selected Holden and HSV models and years, but vehicle build details can still vary. Confirming by part number, rotation, tooth count and mount type is the most reliable way to avoid ordering the wrong starter motor. The 1.2kW rating and 3.72kg weight may also help when comparing to an existing unit during replacement work.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS535 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 74mm, Number of Teeth 10, Pinion at Rest 11mm, Power Rating 1.2kW, Suits Unit Make Delco, New / Reman. New, Wet / Dry Clutch Dry.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. DXS535, Brand OEX, Description OEX Starter Motor 12V 10Th CW Delco Style, Flange Diameter 58mm, Mount Hole Diameter 10, Overall Length 226mm, Pinion Diameter 28mm, Rotation CW.

OEX Starter Motor 12V 10Th CW Delco Style. Part number DXS535 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS535, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include HOLDEN ADVENTRA, HOLDEN ADVENTRA 2003, HOLDEN ADVENTRA 2004, HOLDEN ADVENTRA 2005, HSV AVALANCHE, HSV AVALANCHE 2003. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is 3yr Passenger 1yr Commercial. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm compatibility by matching part number DXS535, 12V voltage, CW rotation, 10 tooth pinion, pad mount type, and the listed dimensions against the existing starter and vehicle application before purchase.

FAQ

What is the part number for this starter motor?

The part number is DXS535. For this listing, part number DXS535 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN ADVENTRA, HOLDEN ADVENTRA 2003, HOLDEN ADVENTRA 2004. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number DXS535 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN ADVENTRA, HOLDEN ADVENTRA 2003, HOLDEN ADVENTRA 2004. These details should still be checked against the original unit before ordering.

Which way does it rotate?

It has clockwise rotation, shown as CW. For this listing, part number DXS535 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN ADVENTRA, HOLDEN ADVENTRA 2003, HOLDEN ADVENTRA 2004. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 10 teeth. For this listing, part number DXS535 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN ADVENTRA, HOLDEN ADVENTRA 2003, HOLDEN ADVENTRA 2004. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

It is listed as a new starter motor. For this listing, part number DXS535 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN ADVENTRA, HOLDEN ADVENTRA 2003, HOLDEN ADVENTRA 2004. These details should still be checked against the original unit before ordering.

What warranty is supplied?

The warranty is 3 years for passenger use and 1 year for commercial use. For this listing, part number DXS535 is the main reference point. Listed voltage is 12. Published fitment references include HOLDEN ADVENTRA, HOLDEN ADVENTRA 2003, HOLDEN ADVENTRA 2004. These details should still be checked against the original unit before ordering.