OEX Starter Motor 12V 10 Tooth CW Denso Style DXS559

The OEX starter motor DXS559 is a new 12V unit in Denso style with clockwise rotation, 10 teeth, and a 2kW power rating. It is a 2 hole starter mount design with 112mm mount centres, a 74mm flange diameter, and M8 mount hole diameter, so the physical dimensions matter when checking replacement suitability.

This starter motor suits Denso applications and is listed with a dry clutch setup, 19mm pinion at rest, 32mm pinion diameter, and an overall length of 216mm. Those measurements are important when comparing against the removed unit, especially where starter clearance, mounting pattern, and pinion engagement need to match closely.

OEX identifies this as a quality replacement starter motor for the Australian automotive aftermarket, and the unit is covered by a 3 year passenger / 1 year commercial warranty. As with any starter replacement, the part number DXS559 and the stated Denso-style application details should be checked before purchase.

Key Features

• 12V starter motor
• 10 tooth pinion
• Clockwise rotation
• 2kW power rating
• Denso style replacement
• 2 hole starter mount

Specifications

• Brand: OEX
• Part No.: DXS559
• Product type: Starter motor
• Voltage: 12V
• Rotation: CW
• Number of teeth: 10
• Power rating: 2kW
• Suits unit make: Denso

Fitment

• Toyota FJ Cruiser
• Toyota Land Cruiser Prado

Application and Buying Notes

Before ordering, match the removed starter against the key identifiers on this unit: DXS559, 12V, 10 teeth, clockwise rotation, and Denso style. The mounting layout is also critical, with 2 hole starter mounting, 112mm mount centres, 74mm flange diameter, and M8 mount holes all needing to align with the vehicle application.

The pinion dimensions are just as important as the electrical rating. This starter is listed with a 19mm pinion at rest and a 32mm pinion diameter, so the engagement geometry should be compared with the original part where fitment is being confirmed. The 2kW rating may be relevant where the original starter specification is being replaced directly rather than updated to a different output.

This is a new unit, not a remanufactured one, and the warranty listed is 3 years for passenger use or 1 year for commercial use. The weight is 5.42kg, which can help when comparing the part in hand and checking that the replacement is the same style and size as the original starter motor.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS559 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 112mm, Number of Teeth 10, Pinion at Rest 19mm, Power Rating 2kW, Suits Unit Make Denso, Item Type Starter Motor, Starter Mount Type 2 Hole.

Additional published details for cross-checking include Weight 5.42kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS559, Brand OEX, Description OEX Starter Motor 12V 10Th CW Denso Style, Flange Diameter 74mm, Mount Hole Diameter M8, Overall Length 216mm, Pinion Diameter 32mm, Rotation CW.

OEX Starter Motor 12V 10Th CW Denso Style. Part number DXS559 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS559, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA LAND CRUISER PRADO, TOYOTA LAND CRUISER PRADO 2003. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is 3yr Passenger 1yr Commercial. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment by checking the part number DXS559, the Denso-style application, and all listed mounting and pinion measurements against the original starter before ordering. Vehicle fitment should always be verified from the exact application details, not only from the make or model name.

FAQ

What type of starter motor is this?

It is an OEX starter motor, new, 12V, Denso style, with clockwise rotation and a 10 tooth pinion. For this listing, part number DXS559 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA LAND CRUISER PRADO. These details should still be checked against the original unit before ordering.

What is the part number?

The part number is DXS559. For this listing, part number DXS559 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA LAND CRUISER PRADO. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

This unit is listed as new. For this listing, part number DXS559 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA LAND CRUISER PRADO. These details should still be checked against the original unit before ordering.

What mounting details are listed?

It has a 2 hole starter mount, 112mm mount centres, a 74mm flange diameter, and M8 mount hole diameter. For this listing, part number DXS559 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA LAND CRUISER PRADO. These details should still be checked against the original unit before ordering.

What warranty is provided?

The listed warranty is 3 years for passenger applications and 1 year for commercial applications. For this listing, part number DXS559 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA LAND CRUISER PRADO. These details should still be checked against the original unit before ordering.

Which vehicles are shown in the fitment data?

The fitment data shows Toyota FJ Cruiser and Toyota Land Cruiser Prado applications. Exact fitment still needs to be confirmed against the part number and the starter measurements. For this listing, part number DXS559 is the main reference point. Listed voltage is 12. Published fitment references include TOYOTA FJ CRUISER, TOYOTA FJ CRUISER 2010, TOYOTA LAND CRUISER PRADO. These details should still be checked against the original unit before ordering.