Denso Air Conditioning Evaporator Core EVX7070 Pad - Pad

This Denso air conditioning evaporator core is a plate and fin unit with pad-to-pad fittings, listed under part number EVX7070. It is an air conditioning evaporator core for the cooling system and is supplied as each, with a one year warranty.

The core measures 272mm in length, 297mm in height, and 59mm in depth or thickness. The inlet fitting is pad and the outlet fitting is pad, so the physical connection style is a key check before ordering, especially where the original unit uses the same pad arrangement.

Key Features

• Denso air conditioning evaporator core
• Part number EVX7070
• Pad inlet and pad outlet fittings
• Plate and fin evaporator type
• One year warranty
• Supplied as each

Specifications

• Brand: Denso
• Product type: Air conditioning evaporator core
• Part number: EVX7070
• Fitting type: Pad - Pad
• Inlet fitting: Pad
• Outlet fitting: Pad
• Evaporator type: Plate and fin
• Length: 272mm

Known applications

• Lexus ES350 GSV60R 3.5L from 11/2013 onwards
• Toyota Highlander 3.5L from 05/2007 to 12/2014
• Toyota Kluger GSU40/45R 3.5L from 08/2007 to 11/2013
• Toyota Tarago ACR50R 2.4L and GSR50R 3.5L from 03/2006 to 06/2012

Application and Buying Notes

Before ordering, check the part number EVX7070, the pad-to-pad fitting style, and the dimensions of 272mm long, 297mm high, and 59mm deep. Those measurements matter because evaporator cores need to fit the HVAC housing correctly, and the connection style must match the original unit.

The listed applications cover Lexus ES350 GSV60R 3.5L from 11/2013 onwards, Toyota Highlander 3.5L from 05/2007 to 12/2014, Toyota Kluger GSU40/45R 3.5L from 08/2007 to 11/2013, and Toyota Tarago ACR50R 2.4L and GSR50R 3.5L from 03/2006 to 06/2012. If your vehicle is close to one of these date ranges, confirm the exact model code, engine size, and factory air conditioning setup before committing to the part.

Because evaporator cores sit inside the climate control system, access and replacement can vary between vehicles even when the fitment looks similar on paper. Matching the OE part number, dimensions, and pad fittings gives the best starting point for confirming suitability, but the final check should always be against the vehicle identification details and the removed component.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number EVX7070 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING EVAPORATOR CORE, Unit of Measure EACH, Warranty One Year, Inlet Fitting Pad, Length 272mm, TX Valve TXX9180, TXX09012, Evaporator Type Plate and Fin, Product Group 1 COOLING, Part No. EVX7070, Brand DENSO.

Additional published details for cross-checking include Description Denso Air Conditioning Evaporator Core Inlet Pad Outlet Pad, Fitting Type Pad - Pad, Depth / Thickness 59mm, Outlet Fitting Pad, Height 297mm, Product Group 2 AC COMPONENTS.

Denso Air Conditioning Evaporator Core Inlet Pad Outlet Pad. Part number EVX7070 should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number EVX7070, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning evaporator core in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include TOYOTA KLUGER, TOYOTA KLUGER 2003, TOYOTA KLUGER 2004, TOYOTA KLUGER 2005. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm compatibility by matching EVX7070, the pad-to-pad fitting style, the 272mm x 297mm x 59mm dimensions, and the listed vehicle application details before ordering.

FAQ

What is the part number for this evaporator core?

The part number is EVX7070. For this listing, part number EVX7070 is the main reference point. Published fitment references include TOYOTA KLUGER, TOYOTA KLUGER 2003, TOYOTA KLUGER 2004. These details should still be checked against the original unit before ordering.

What type of fittings does this evaporator core use?

It uses pad inlet and pad outlet fittings, with a pad - pad fitting type. For this listing, part number EVX7070 is the main reference point. Published fitment references include TOYOTA KLUGER, TOYOTA KLUGER 2003, TOYOTA KLUGER 2004. These details should still be checked against the original unit before ordering.

What are the dimensions of the unit?

The listed dimensions are 272mm in length, 297mm in height, and 59mm in depth or thickness. For this listing, part number EVX7070 is the main reference point. Published fitment references include TOYOTA KLUGER, TOYOTA KLUGER 2003, TOYOTA KLUGER 2004. These details should still be checked against the original unit before ordering.

Which vehicles are listed as applications?

Listed applications are Lexus ES350 GSV60R 3.5L from 11/2013 onwards, Toyota Highlander 3.5L from 05/2007 to 12/2014, Toyota Kluger GSU40/45R 3.5L from 08/2007 to 11/2013, and Toyota Tarago ACR50R 2.4L and GSR50R 3.5L from 03/2006 to 06/2012.

What evaporator design is this?

It is a plate and fin evaporator core. For this listing, part number EVX7070 is the main reference point. Published fitment references include TOYOTA KLUGER, TOYOTA KLUGER 2003, TOYOTA KLUGER 2004. These details should still be checked against the original unit before ordering.

What should I verify before buying?

Check the part number EVX7070, the pad-to-pad fittings, the 272mm x 297mm x 59mm dimensions, and the exact vehicle application details against the vehicle you are repairing. For this listing, part number EVX7070 is the main reference point. Published fitment references include TOYOTA KLUGER, TOYOTA KLUGER 2003, TOYOTA KLUGER 2004. These details should still be checked against the original unit before ordering.