Red Dot Air Conditioning Blower Wheel RD325572P 132MM 8MM Bi-directional

The Red Dot Air Conditioning Blower Wheel, part number RD325572P, is a steel blower wheel supplied as a single each. It has an outside diameter of 132mm, a depth/thickness of 100mm, a width of 95mm, and an 8mm shaft diameter, so the physical dimensions can be checked before ordering.

The stated references are To suit: R-5045 and R-7830, with Ref No. 73R7151. Because blower wheels are size- and shaft-specific parts, the 132mm outside diameter and 8mm shaft diameter are the main checks to confirm against the unit being replaced.

Key Features

• Red Dot air conditioning blower wheel
• Part number RD325572P
• 132mm outside diameter
• 8mm shaft diameter
• Double entry blade type
• Bi-directional rotation

Specifications

• Type: Air conditioning blower wheel
• Brand: Red Dot
• Unit of measure: Each
• Warranty: One year
• Outside diameter: 132mm
• Depth / thickness: 100mm
• Width: 95mm
• Shaft diameter: 8mm

Fitment information

• To suit R-5045
• To suit R-7830

Application and Buying Notes

Before ordering, check the replacement blower wheel against the existing unit’s 132mm outside diameter, 8mm shaft diameter, 100mm depth/thickness, and 95mm width. Those dimensions are the practical checks that matter most when confirming whether RD325572P is the correct match.

The listed references, including part number RD325572P and Ref No. 73R7151, are useful when cross-checking against old parts, workshop records, or removed components. The stated applications to suit R-5045 and R-7830 should be treated as the supplied fitment guidance, and the physical dimensions should still be verified before purchase.

This is a steel blower wheel weighing 0.426kg and sold each, so it is intended as a direct component replacement rather than a paired kit. If the existing assembly has wear, damage, or distortion, compare the old wheel carefully because even small changes in diameter or shaft fit can affect compatibility.

A one year warranty is listed for this part. As with any climate control component, correct selection depends on the exact part number, shaft size, and wheel dimensions, so it is best to confirm those details before fitting or handing the job over to a workshop.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number RD325572P helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING BLOWER WHEEL, Unit of Measure EACH, Warranty One Year, Outside Diameter 132mm, Shaft Diameter 8mm, Blade Type Double Entry, Body Material Steel, Weight .426kg, Product Group 1 COOLING, Part No. RD325572P.

Additional published details for cross-checking include Brand REDDOT, Description Red Dot Air Conditioning Blower Wheel, Depth / Thickness 100mm, Rotation Bi-Directional, Width 95mm, Item Type Blower Wheel, Entry Double, Product Group 2 HEATING.

Red Dot Air Conditioning Blower Wheel. Part number RD325572P should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number RD325572P, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning blower wheel in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

In the absence of a verified fitment list, the safest approach is to compare the removed unit directly with the listed product details. That includes checking the housing style, pulley layout, regulator arrangement, and any visible identification numbers before supply is approved.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm fitment using part number RD325572P, reference 73R7151, and the measured 132mm outside diameter with 8mm shaft diameter before ordering.

FAQ

What is the part number for this blower wheel?

The listed part number is RD325572P. For this listing, part number RD325572P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD325572P is the main reference point. These details should still be checked against the original unit before ordering.

What size is the shaft diameter?

The shaft diameter is 8mm. For this listing, part number RD325572P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD325572P is the main reference point. These details should still be checked against the original unit before ordering.

What is the outside diameter of the wheel?

The outside diameter is 132mm. For this listing, part number RD325572P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD325572P is the main reference point. These details should still be checked against the original unit before ordering.

Which applications are listed for this part?

The supplied fitment guidance states: To suit R-5045 and R-7830. For this listing, part number RD325572P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD325572P is the main reference point. These details should still be checked against the original unit before ordering.

What material is the blower wheel made from?

The body material is steel. For this listing, part number RD325572P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD325572P is the main reference point. These details should still be checked against the original unit before ordering.

Is the wheel designed for a specific rotation direction?

It is listed as bi-directional rotation. For this listing, part number RD325572P is the main reference point. These details should still be checked against the original unit before ordering. For this listing, part number RD325572P is the main reference point. These details should still be checked against the original unit before ordering.