OEX Starter Motor 12V 13 Tooth CW Mitsubishi Style MXS2004

The OEX MXS2004 is a 12V starter motor in Mitsubishi style, built as a new replacement unit for rotating electrical applications. It is a 13 tooth design with clockwise rotation, a 1.4kW power rating, and a dry clutch arrangement, so the key checks are voltage, rotation, tooth count, and mounting dimensions before ordering.

Physical measurements are listed as 134mm mount centres, 103mm flange diameter, 9mm mount hole diameter, 192mm overall length, 34mm pinion diameter, and 14mm pinion at rest. These dimensions matter because the correct starter needs to match the engine-side mounting pattern and clearance requirements as well as the electrical setup.

OEX positions this as a quality replacement starter motor for the Australian automotive aftermarket. The brand name stands for Original Equipment Xchange, and the unit is supported by a 3 year passenger or 1 year commercial warranty, with the source warranty note also describing 3 year or 75,000 kilometre coverage on new units and 2 year or 50,000 kilometre coverage on re-manufactured passenger vehicle units.

Key Features

• 12V starter motor
• Mitsubishi style unit
• 13 tooth pinion
• Clockwise rotation
• 1.4kW power rating
• New unit

Specifications

• Brand: OEX
• Part number: MXS2004
• Product type: Starter motor
• Voltage: 12
• Rotation: CW
• Number of teeth: 13
• Power rating: 1.4kW
• Mount centres A: 134mm

Fitment guidance

• FORD: FALCON, FALCON 2005, FALCON 2006, FALCON 2007, FALCON 2008, plus other listed applications
• FPV: FALCON, FALCON 2005, FALCON 2006, FALCON 2007, FALCON 2008, plus other listed applications

Application and Buying Notes

Before ordering, compare the part number MXS2004 with the vehicle’s original starter details and check the listed dimensions: 12V, 13 tooth, CW rotation, 134mm mount centres, 103mm flange diameter, and 2 hole starter mount. Starter motors that look similar can still differ in tooth count, rotation, or mounting pattern, so those checks are the most reliable way to avoid a mismatch.

The 1.4kW rating is a useful point of comparison when matching the existing unit, but it should be read alongside the physical measurements and the Mitsubishi style fitment description. The pinion at rest is 14mm and the pinion diameter is 34mm, so clearance and engagement should be confirmed against the removed starter where possible.

This is a new OEX starter motor, not a remanufactured unit. The warranty information supplied with the product notes 3 year passenger or 1 year commercial coverage, and also references 3 year or 75,000 kilometre protection on new units. Use that as a reference point only after confirming the exact application and warranty terms that apply to your vehicle and usage.

If you are replacing a failed starter, it is worth checking the old unit for the same mounting style, overall length of 192mm, and the electrical rotation direction. Matching the original part number is still the best practical guide, particularly where different engine variants or build dates may use different starter configurations within the same model range.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXS2004 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 134mm, Number of Teeth 13, Pinion at Rest 14mm, Power Rating 1.4kW, Suits Unit Make Mitsubishi, New / Reman. New, Wet / Dry Clutch Dry.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. MXS2004, Brand OEX, Description OEX Starter Motor 12V 13Th CW Mitsubishi Style, Flange Diameter 103mm, Mount Hole Diameter 9, Overall Length 192mm, Pinion Diameter 34mm, Rotation CW.

OEX Starter Motor 12V 13Th CW Mitsubishi Style. Part number MXS2004 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MXS2004, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include FORD FALCON, FORD FALCON 2005, FORD FALCON 2006, FORD FALCON 2007, FPV FALCON, FPV FALCON 2005. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number MXS2004, the 12V CW 13 tooth specification, and the listed dimensions before purchase. The Ford and FPV application information supplied should be treated as application guidance only until you verify it against your vehicle’s original starter and build details.

FAQ

What is the part number for this starter motor?

The part number is MXS2004. For this listing, part number MXS2004 is the main reference point. Listed voltage is 12. Published fitment references include FORD FALCON, FORD FALCON 2005, FORD FALCON 2006. These details should still be checked against the original unit before ordering.

Is this a 12V unit?

Yes. The listed voltage is 12V. For this listing, part number MXS2004 is the main reference point. Listed voltage is 12. Published fitment references include FORD FALCON, FORD FALCON 2005, FORD FALCON 2006. These details should still be checked against the original unit before ordering.

What rotation does the starter motor use?

The rotation is clockwise, shown as CW. For this listing, part number MXS2004 is the main reference point. Listed voltage is 12. Published fitment references include FORD FALCON, FORD FALCON 2005, FORD FALCON 2006. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

It has 13 teeth. For this listing, part number MXS2004 is the main reference point. Listed voltage is 12. Published fitment references include FORD FALCON, FORD FALCON 2005, FORD FALCON 2006. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as a new unit. For this listing, part number MXS2004 is the main reference point. Listed voltage is 12. Published fitment references include FORD FALCON, FORD FALCON 2005, FORD FALCON 2006. These details should still be checked against the original unit before ordering.

What warranty information is supplied?

The warranty field states 3 year passenger and 1 year commercial. The product feature notes also mention 3 year or 75,000 kilometre coverage on new units and 2 year or 50,000 kilometre coverage on re-manufactured passenger vehicle units. For this listing, part number MXS2004 is the main reference point. Listed voltage is 12. Published fitment references include FORD FALCON, FORD FALCON 2005, FORD FALCON 2006. These details should still be checked against the original unit before ordering.