Hanon System HCC Air Conditioning Receiver Drier RDX166 For Holden Epica EP 01/2007-12/2011

The Hanon System HCC air conditioning receiver drier is a pad-to-pad AC component with part number RDX166, supplied as a single unit and listed for Holden Epica EP applications from 01/2007 to 12/2011. It uses pad inlet and pad outlet fittings, measures 180mm high and 60mm in diameter, and weighs 0.38kg.

Hanon System identifies this part as an HCC air conditioning receiver drier, with a one year warranty and product grouping under cooling and AC components. It is described as being sourced directly from leading manufacturers and designed for the demands of the Australian environment, which makes the identification details and fitment check especially important before ordering.

Key Features

• Hanon System HCC air conditioning receiver drier
• Part number RDX166
• Fits Holden Epica EP 01/2007-12/2011
• Pad inlet and pad outlet fittings
• Pad-to-pad fitting type
• 180mm high

Specifications

• Type: Air conditioning receiver drier
• Receiver drier type: Drier
• Brand: Hanon System
• Part No.: RDX166
• Unit of measure: Each
• Fitting type: Pad - Pad
• Inlet fitting: Pad
• Outlet fitting: Pad

Verified fitment

• Holden Epica EP 01/2007 - 12/2011

Application and Buying Notes

Before ordering, confirm your vehicle is a Holden Epica EP built between 01/2007 and 12/2011, and compare the part number RDX166 with the component being replaced. The listed pad-to-pad fitting type, 180mm height, and 60mm diameter are practical checks for making sure the receiver drier matches the space and connection style in the vehicle.

If the existing part is unreadable or missing, use the vehicle application, the RDX166 part number, and the physical dimensions together to cross-check suitability. That is the safest approach with AC components, because a visually similar drier can differ in fitting style, height, or connection layout.

The one year warranty applies to the supplied part, but it does not replace the need to verify fitment first. For best results, compare the old unit, the vehicle build date, and the pad-to-pad connection arrangement before purchasing, especially on climate control parts where fitment is determined by the exact application.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number RDX166 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING RECEIVER DRIER, Unit of Measure EACH, Warranty One Year, Inlet Fitting Pad, Outlet Fitting Pad, Diameter 60mm, Weight .38kg, Product Group 1 COOLING, Part No. RDX166, Brand HANON SYSTEM.

Additional published details for cross-checking include Description HCC Air Conditioning Reciever Drier, Fitting Type Pad - Pad, Number of Switch Ports 0, Height 180mm, Receiver Drier Type Drier, Product Group 2 AC COMPONENTS.

HCC Air Conditioning Reciever Drier. Part number RDX166 should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number RDX166, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning receiver drier in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include HOLDEN EPICA, HOLDEN EPICA 2007, HOLDEN EPICA 2008, HOLDEN EPICA 2009. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Please confirm fitment using the part number RDX166, the Holden Epica EP application from 01/2007-12/2011, and the pad-to-pad fitting details before ordering.

FAQ

What vehicle is this receiver drier listed for?

It is listed for Holden Epica EP models from 01/2007 to 12/2011. For this listing, part number RDX166 is the main reference point. Published fitment references include HOLDEN EPICA, HOLDEN EPICA 2007, HOLDEN EPICA 2008. These details should still be checked against the original unit before ordering.

What is the part number?

The part number is RDX166. For this listing, part number RDX166 is the main reference point. Published fitment references include HOLDEN EPICA, HOLDEN EPICA 2007, HOLDEN EPICA 2008. These details should still be checked against the original unit before ordering.

What type of AC component is it?

It is an air conditioning receiver drier, listed as receiver drier type Drier. For this listing, part number RDX166 is the main reference point. Published fitment references include HOLDEN EPICA, HOLDEN EPICA 2007, HOLDEN EPICA 2008. These details should still be checked against the original unit before ordering.

What fittings does it use?

It has pad inlet and pad outlet fittings, with a pad-to-pad fitting type. For this listing, part number RDX166 is the main reference point. Published fitment references include HOLDEN EPICA, HOLDEN EPICA 2007, HOLDEN EPICA 2008. These details should still be checked against the original unit before ordering.

What are the key dimensions?

It is 180mm high and 60mm in diameter, and it weighs 0.38kg. For this listing, part number RDX166 is the main reference point. Published fitment references include HOLDEN EPICA, HOLDEN EPICA 2007, HOLDEN EPICA 2008. These details should still be checked against the original unit before ordering.

Is there a warranty listed?

Yes. The listed warranty is one year. For this listing, part number RDX166 is the main reference point. Published fitment references include HOLDEN EPICA, HOLDEN EPICA 2007, HOLDEN EPICA 2008. These details should still be checked against the original unit before ordering.