OEX Alternator 12V 90A Hitachi Style HXA076

This OEX alternator is a 12V, 90A unit in Hitachi style, supplied as a new rotating electrical part under part number HXA076. It uses an internal regulator, a twin leg alternator mount, and a pulley with an outside diameter of 72mm, so matching the mounting and pulley details matters as much as matching the electrical rating.

Key mounting dimensions listed for this unit are 82mm inside mounting legs, 170mm mount centre to centre, a 10mm pivot hole diameter, and an M8x1.25 adjusting hole. The shaft dimension is 17, and the pulley section is AA. Those details help confirm whether the alternator will physically suit the application before anything is fitted.

OEX positions this alternator as a product sourced from original equipment manufacturers and aftermarket suppliers, with ISO9001 certified factories supporting engineering, testing, and quality control procedures. It is backed by a 3 year passenger / 1 year commercial warranty, which is a useful point of comparison when you are choosing a replacement alternator for a vehicle that needs dependable charging support.

Key Features

• 12V alternator with 90A power rating
• Hitachi style unit
• New, not remanufactured
• Internal regulator
• Twin leg alternator mount
• Pulley outside diameter 72mm

Specifications

• Brand: OEX
• Product type: Alternator
• Unit of measure: Each
• Voltage: 12V
• Power rating: 90A
• Suit unit make: Hitachi
• Alternator mount: Twin leg
• Inside mounting legs: 82mm

Confirmed application groups

• Ford Maverick
• Nissan Cabstar
• Nissan Elgrand
• Nissan Industrial
• Nissan Industrial Forklift
• Nissan Navara
• Nissan Patrol
• Peugeot 308

Application and Buying Notes

Before ordering, compare the alternator mount style, because this unit is listed as a twin leg Hitachi style alternator with 82mm inside mounting legs and 170mm mount centre to centre. Those dimensions are often the quickest way to rule in or rule out a physical match when replacing a charging component.

Check the pulley details as well. This alternator has a 72mm pulley outside diameter and AA pulley section, so belt alignment and pulley profile should be confirmed against the existing unit. The pivot hole is 10mm and the adjusting hole is M8x1.25, which are practical checkpoints when comparing brackets and hardware.

The electrical side is equally important. This is a 12V, 90A alternator with an internal regulator, so it suits applications designed around those specifications. If the existing alternator differs in voltage, output, regulator type, or shaft dimension, it should be treated as a different part until verified.

The listed application groups include Ford Maverick, Nissan Cabstar, Nissan Elgrand, Nissan Industrial, Nissan Industrial Forklift, Nissan Navara, Nissan Patrol, and Peugeot 308. Model names alone are not enough on their own, so matching the vehicle to the part number HXA076 and the physical specifications remains the safest way to buy the correct replacement.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number HXA076 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Inside Mounting Legs 82mm, Pivot Hole Diameter 10, Pulley Outside Diameter 72mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 170mm, Shaft Dimension 17.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. HXA076, Brand OEX, Description OEX Alternator 12V 90A Hitachi Style, Adjusting Hole Diameter M8x1.25, Pin Code IR49, Power Rating (Amp) 90, Pulley Section AA, Suits Unit Make Hitachi.

OEX Alternator 12V 90A Hitachi Style. Part number HXA076 should be checked first. Listed voltage is 12. Listed output rating is 90. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Twin Leg. Regulator type is Internal. Pulley configuration is AA. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number HXA076, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 90 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include FORD MAVERICK, FORD MAVERICK 1988, FORD MAVERICK 1989, FORD MAVERICK 1990, NISSAN CABSTAR, NISSAN CABSTAR 1987. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is 3yr Passenger 1yr Commercial. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm fitment using part number HXA076, the 12V 90A specification, and the listed mounting and pulley dimensions before ordering. Vehicle model names are only a guide; the final check should always be the existing alternator’s physical measurements and application details.

FAQ

What is the part number for this alternator?

The part number is HXA076.

Is this alternator new or remanufactured?

It is listed as new.

What voltage and output does it have?

It is a 12V alternator with a 90A power rating.

What regulator type does it use?

It has an internal regulator.

What mounting dimensions are listed?

The listed dimensions are 82mm inside mounting legs, 170mm mount centre to centre, a 10mm pivot hole diameter, and an M8x1.25 adjusting hole.

Which vehicles are shown as application groups?

The confirmed application groups listed are Ford Maverick, Nissan Cabstar, Nissan Elgrand, Nissan Industrial, Nissan Industrial Forklift, Nissan Navara, Nissan Patrol, and Peugeot 308. Model and year still need to be checked against the existing alternator and part number.