Bosch Alternator 12V 95A BXU1296A

The Bosch Alternator 12V 95A, part number BXU1296A, is a new rotating electrical unit supplied as an each item. It is designed as a single leg alternator with an internal regulator, and it carries a 95 amp power rating at 12 volts for applications that require a matching charging output and mounting arrangement.

Key mounting details include a 51 mm mount leg thickness, 173 mm mount centre-to-centre, a 10 mm pivot hole diameter, and an M8x1.25 adjusting hole diameter. The shaft diameter is 17 mm, and the pulley section is listed as not applicable, so those physical points should be checked carefully against the existing unit before ordering.

This alternator is listed for Bosch unit make applications and is supplied new, not remanufactured. It also carries a one year warranty, with a weight of 4.58 kg, which can be useful when comparing against the unit already fitted to the vehicle or machine.

Key Features

• 12V alternator with 95A output
• Bosch part number BXU1296A
• New unit, not remanufactured
• Internal regulator fitted
• Single leg alternator mount
• Corrosion resistant construction

Specifications

• Type: Alternator
• Brand: Bosch
• Voltage: 12V
• Power rating: 95A
• Part number: BXU1296A
• Regulator type: Internal
• Alternator mount: Single leg
• Mount leg thickness: 51mm

Confirmed fitment references

• ATLAS COPCO XAS175
• BLAW KNOX PF2181
• CASE 135
• CASE 1835B
• CASE 1835C
• CASE 1845B
• CATERPILLAR 3116T
• CATERPILLAR 416

Application and Buying Notes

Before ordering, match the Bosch part number BXU1296A first, then check the mounting and shaft details against the unit being replaced. The important checkpoints on this alternator are the single leg mount, 51 mm mount leg thickness, 173 mm mount centre-to-centre, 10 mm pivot hole, M8x1.25 adjusting hole, and 17 mm shaft diameter.

The 12V, 95A specification matters because it needs to suit the vehicle or machine’s charging system requirements. If the fitted alternator differs in output, regulator type, or physical mount arrangement, the correct replacement may be a different unit even if it looks similar at a glance.

This alternator is listed with an internal regulator and no applicable pulley section, so the existing charging setup should be checked for the same arrangement before purchase. The unit is new and weighs 4.58 kg, which can also help when confirming that the replacement is comparable to the one removed.

If you are working from a parts number or machine model, use both the application details and the measurements together. The fitment references include a range of equipment and vehicle applications, but the safest approach is still to verify the actual part number, mounting points, and shaft dimensions against the unit on the machine.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number BXU1296A helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty One Year, Mount Leg Thickness 51mm, Pivot Hole Diameter 10, Pulley Section Not Applicable, Shaft Diameter 17mm, Voltage 12, Mount Cnt to Cnt 173mm, Shaft Dimension 17.

Additional published details for cross-checking include Product Group 2 ALTERNATORS, Part No. BXU1296A, Brand BOSCH, Description Bosch Alternator 12V 95A, Adjusting Hole Diameter M8x1.25, Pin Code IR165, Power Rating (Amp) 95, Regulator Type Internal, Suits Unit Make Bosch.

Bosch Alternator 12V 95A. Part number BXU1296A should be checked first. Listed voltage is 12. Listed output rating is 95. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Single Leg. Regulator type is Internal. Pulley configuration is Not Applicable. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number BXU1296A, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 95 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Compatibility note: Confirm compatibility by matching Bosch part number BXU1296A, 12V/95A output, single leg mounting, and the listed hole and shaft dimensions against the existing alternator and application details before ordering.

FAQ

What is the part number for this Bosch alternator?

The part number is BXU1296A. For this listing, part number BXU1296A is the main reference point. Listed voltage is 12. Listed output rating is 95. Published fitment references include ATLAS COPCO XAS175, BLAW KNOX PF2181, CASE 135. These details should still be checked against the original unit before ordering.

What voltage and output does it have?

It is a 12V alternator with a 95A power rating. For this listing, part number BXU1296A is the main reference point. Listed voltage is 12. Listed output rating is 95. Published fitment references include ATLAS COPCO XAS175, BLAW KNOX PF2181, CASE 135. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured unit?

It is listed as new. For this listing, part number BXU1296A is the main reference point. Listed voltage is 12. Listed output rating is 95. Published fitment references include ATLAS COPCO XAS175, BLAW KNOX PF2181, CASE 135. These details should still be checked against the original unit before ordering.

Does it have an internal regulator?

Yes, the regulator type is internal. For this listing, part number BXU1296A is the main reference point. Listed voltage is 12. Listed output rating is 95. Published fitment references include ATLAS COPCO XAS175, BLAW KNOX PF2181, CASE 135. These details should still be checked against the original unit before ordering.

What mounting details should be checked before buying?

Check the single leg mount, 51 mm mount leg thickness, 173 mm mount centre-to-centre, 10 mm pivot hole diameter, and M8x1.25 adjusting hole diameter. For this listing, part number BXU1296A is the main reference point. Listed voltage is 12. Listed output rating is 95. Published fitment references include ATLAS COPCO XAS175, BLAW KNOX PF2181, CASE 135. These details should still be checked against the original unit before ordering.

What warranty is listed?

A one year warranty is listed. For this listing, part number BXU1296A is the main reference point. Listed voltage is 12. Listed output rating is 95. Published fitment references include ATLAS COPCO XAS175, BLAW KNOX PF2181, CASE 135. These details should still be checked against the original unit before ordering.