Hella Rocker Switch On/off Spst 12V Green Illuminated 10A Part No. 4411

The HELLA Rocker Switch is a 12V on/off SPST switch with green illumination, 3 terminals, and contacts rated to 10A at 12V. It is identified by Part No. 4411 and suits applications where a compact, illuminated control switch is needed in a 12V automotive electrical setup.

This switch uses a 14mm mount diameter with a 6mm mount length, so panel opening size matters when planning the installation. It is supplied as a single unit and is listed as a push-pull switch type with 2 positions and switch action described as On - Off - SPST.

Green illumination helps make the switch easier to locate in low light, while the 1 pole, 3 terminal layout keeps the wiring straightforward for suitable circuits. As with any switch installation, the current draw of the circuit and the panel fit should be checked before ordering.

Key Features

• HELLA branded rocker switch
• On - Off - SPST switch action
• 12V rated switch
• 10A contact rating at 12V
• Green illuminated switch
• 3 terminal layout

Specifications

• Brand: HELLA
• Part No.: 4411
• Type: Switch
• Power rating: 10 amp
• Voltage: 12V
• Number of poles: 1
• Number of terminals: 3
• Number of positions: 2

Application and Buying Notes

Before buying, confirm the panel opening suits the 14mm mount diameter and that the available mounting depth can accommodate the 6mm mount length. Those two measurements are the main physical checks for this switch, especially where space is tight behind the dash or in an accessory panel.

Electrically, this is a 12V switch with contacts rated at 10A at 12V, so it should only be considered for circuits that stay within that rating. If the circuit load is close to the limit, the wiring, fuse protection, and the equipment being switched should all be checked by a qualified person before installation.

The switch has 3 terminals, 1 pole, and an On - Off - SPST action. That makes it suitable for simple single-circuit control, but it should still be matched carefully to the wiring layout required by the vehicle or accessory you are fitting.

Green illumination is a useful visibility feature, but it does not change the electrical rating or the mounting size. If you are replacing an existing switch, compare the part number 4411, the terminal count, the mounting dimensions, and the switch action before ordering to reduce the chance of a mismatch.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number 4411 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type SWITCH, Unit of Measure EACH, Warranty Three Years, Power Rating (Amp) 10, Voltage 12, Mount Diameter 14mm, Number of Poles 1, Switch Type Push - Pull, Product Group 1 AUTO ELEC ACCESSORIES, Part No. 4411.

Additional published details for cross-checking include Brand HELLA, Description Hella Rocker Switch On/Off SPST 12V Green Illuminated (Contacts Rated 10A @ 12V), Number of Terminals 3, Switch Action On - Off - SPST, Lamp Colour/s Green, Mount Length 6mm, Number of Positions 2, Switch Illumination Illuminated, Product Group 2 FUSES BREAKERS RELAYS SWITCHES.

Hella Rocker Switch On/Off SPST 12V Green Illuminated (Contacts Rated 10A @ 12V). Part number 4411 should be checked first. Listed voltage is 12. Listed output rating is 10. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number 4411, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a switch in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 10 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Where no verified application list is available, the part number, mounting details, connector style, and published specifications should be used as the primary selection criteria.

Compatibility note: Confirm compatibility by checking Part No. 4411, the 12V operating requirement, the 10A contact rating, the 14mm mount diameter, the 6mm mount length, and the 3-terminal On - Off - SPST layout against your existing switch or intended application.

FAQ

What type of switch is this?

It is a HELLA rocker switch with On - Off - SPST switch action. It is listed as a 12V switch with a 10A contact rating and green illumination. For this listing, part number 4411 is the main reference point. Listed voltage is 12. Listed output rating is 10. These details should still be checked against the original unit before ordering.

What part number should I use to match it?

The part number is 4411. Matching the part number, along with the mounting and terminal details, is the safest way to check suitability. For this listing, part number 4411 is the main reference point. Listed voltage is 12. Listed output rating is 10. These details should still be checked against the original unit before ordering.

How many terminals does this switch have?

It has 3 terminals. The switch is also listed as 1 pole and 2 positions. For this listing, part number 4411 is the main reference point. Listed voltage is 12. Listed output rating is 10. These details should still be checked against the original unit before ordering.

What mounting size does it need?

It requires a 14mm mount diameter and has a 6mm mount length. Those measurements should be checked against the panel opening and available depth before purchase. For this listing, part number 4411 is the main reference point. Listed voltage is 12. Listed output rating is 10. These details should still be checked against the original unit before ordering.

Is this switch illuminated?

Yes, it is illuminated and the lamp colour is green. The illumination assists visibility, particularly in low-light use. For this listing, part number 4411 is the main reference point. Listed voltage is 12. Listed output rating is 10. These details should still be checked against the original unit before ordering.

What warranty is listed for this switch?

The listed warranty is three years. For this listing, part number 4411 is the main reference point. Listed voltage is 12. Listed output rating is 10. These details should still be checked against the original unit before ordering.